Papers / Proceedings

2026

• Hartmann A., Liu Z., Lamprecht S., Bründl P., Franke J.:
  AI-Driven Multisensor Quality Inspection: A Focus on Robotic Wire Harness Assembly
  44th IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2025 (Kamakura, JPN, 31. August 2025 - 4. September 2025)
  In: Hajime Mizuyama, Eiji Morinaga, Tomomi Nonaka, Toshiya Kaihara, Gregor von Cieminski, David Romero (ed.): IFIP Advances in Information and Communication Technology 2026
  DOI: 10.1007/978-3-032-03538-7_25

2025

• Andreas D., Werner D., Hou Z., Dwivedi A., Castellini C., Beckerle P.:
  A database of multimodal myography and hand kinematics during realistic daily life activities
  In: Scientific Data 12 (2025), Article No.: 1507
  ISSN: 2052-4463
  DOI: 10.1038/s41597-025-05852-6
• Kedilioglu O., Zhao Y., Landesberger M., Hofmann C., Hofmann M., Franke J., Reitelshöfer S.:
  Analysis of Point Set Registration Algorithms for Industrial Parts
  Springer Science+Business Media, 2025
  ISBN: 9783031740107
  DOI: 10.1007/978-3-031-74010-7_18
• Roumeliotis P., Drummer D.:
  Ammonium polyphosphate and pentaerythritol as a flame-retardant system for polyamide 12 in selective laser sintering
  In: Progress in Additive Manufacturing (2025)
  ISSN: 2363-9512
  DOI: 10.1007/s40964-025-01071-y
• Tischer F., Cholewa S., Düsenberg B., Drummer D., Bück A., Peukert W., Schmidt J.:
  Closed loop recycling approach for aged polyamide 12 feedstocks for powder bed fusion by precipitation from a moderate solvent combined with solvolysis
  In: Additive Manufacturing 107 (2025), Article No.: 104822
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2025.104822

2024

• Forstner T., Drummer D.:
  Continuous production of cellular ceramics through thermoplastic foam extrusion
  SPE ANTEC 2024 (St. Louis, Missouri, 4. März 2024 - 7. März 2024)
• Kaufmann A., Schlicht S., Rösel U., Drummer D.:
  Adhesion‐controlled anisotropic rotational molding of multilayered ultrasoft silicone films
  In: Polymer Engineering and Science (2024)
  ISSN: 0032-3888
  DOI: 10.1002/pen.26869
• Ma Z., Jiang B., Drummer D., Zhang L.:
  Composite electroforming of precision Ni-P-PTFE mold inserts with low internal stress and self-lubricating properties
  In: Surface & Coatings Technology 494 (2024), Article No.: 131488
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2024.131488
• Rösel U., Drummer D.:
  Changes in Material Behavior according to the Amount of Recycled Magnetic Materials in Polymer-Bonded Magnets Based on Thermoplastics
  In: Magnetism 4 (2024), p. 1-23
  ISSN: 2673-8724
  DOI: 10.org./10.3390/magnetism4010001
• Schlicht S., Kaufmann A., Kleffel T., Drummer D.:
  Biomechanische Metamaterialien – Prozesse, Möglichkeiten und Perspektiven
  38. Engelberger Kunststofftechnisches Seminar 2024 (Engelberg, 9. März 2024 - 14. März 2024)

2023

• Cholewa S., Jaksch A., Drummer D.:
  Analysis of Flow Additives in Laser-Based Powder Bed Fusion of Polymers: Implications for Flow Behavior, Processing, Temperature Profile, and Part Characteristics
  Solid Freeform Fabrication 2023: Proceeding of the 34th Annual International Solid Freeform Fabrication Symposium
• Cholewa S., Stieglitz L., Jaksch A., Rieger B., Drummer D.:
  Tailored Syndiotactic Polypropylene Feedstock Material for Laser-Based Powder Bed Fusion of Polymers: Material Development and Processability
  In: ACS Applied Polymer Materials (2023)
  ISSN: 2637-6105
  DOI: 10.1021/acsapm.2c02112
• Dong Y., Jiang B., Qiang J., Ma Z., Drummer D., Zhang L.:
  Tuning formation process of void defects in microcolumn arrays via pulse reverse electrodeposition
  In: Journal of Materials Research and Technology 24 (2023), p. 3055-3066
  ISSN: 2238-7854
  DOI: 10.1016/j.jmrt.2023.03.201
• Drummer D., Schlicht S., Greiner S.:
  Additive Manufacturing of Functionalized Material Systems for Medical Applications: Potentials and Challenges in Additive Manufacturing
  8th International Conference on Additive Technologies iCAT 2023 (Maribor, Slowenien, 19. April 2023 - 22. April 2023)
  In: Additive Manufacturing in Multidisciplinary Cooperation and Production, Cham: 2023
  DOI: 10.1007/978-3-031-37671-9_23
• Jaksch A., Cholewa S., Drummer D.:
  Thin-Walled Part Properties in Powder Bed Fusion of Polymers—A Comparative Study on Temperature Development and Part Performance Depending on Part Thickness and Orientation
  In: Journal of Manufacturing and Materials Processing 7 (2023), Article No.: 96
  ISSN: 2504-4494
  DOI: 10.3390/jmmp7030096
• Li S., Wu W., Drummer D., Wang Y., Lu Z., Zhao X.:
  Copper and graphene work together to construct a three-dimensional skeleton thermal conductivity network to improve the thermal conductivity of the epoxy resin
  In: Polymer Composites (2023)
  DOI: 10.1002/pc.27494
• Popp J., Busch M., Hausotte T., Drummer D.:
  Fiber Orientation in continuous fiber reinforced thermoplastics/metal hybrid joining via multi-pin arrays
  In: Science and Engineering of Composite Materials 30 (2023)
  ISSN: 0334-181X
  DOI: 10.1515/secm-2022-0165
  URL: https://www.degruyter.com/document/doi/10.1515/secm-2022-0165/html
• Rösel U., Drummer D.:
  Correlation between the Material System and the Magnetic Properties in Thermoset-Based Multipolar Ring Magnets
  In: Magnetism 3 (2023), p. 226-244
  ISSN: 2673-8724
  DOI: 10.3390/magnetism3030018
• Rösel U., Drummer D.:
  Extension of the Application Range of Multipolar Bonded Ring Magnets by Thermosets in Comparison to Thermoplastics
  In: Magnetism 3 (2023), p. 71-89
  ISSN: 2673-8724
  DOI: 10.3390/magnetism3010007
• Schlicht S., Cholewa S., Drummer D.:
  Process-Structure-Property Interdependencies in Non-Isothermal Powder Bed Fusion of Polyamide 12
  In: Journal of Manufacturing and Materials Processing 7 (2023), Article No.: 33
  ISSN: 2504-4494
  DOI: 10.3390/jmmp7010033
• Schlicht S., Drummer D.:
  Accelerated Powder Bed Fusion of Polypropylene Using Superposed Fractal Exposure Strategies
  8th International Conference on Additive Technologies (Maribor, 19. April 2023 - 22. April 2023)
  In: Additive Manufacturing in Multidisciplinary Cooperation and Production 2023
  DOI: 10.1007/978-3-031-37671-9_1
• Tischer F., Cholewa S., Düsenberg B., Drummer D., Peukert W., Schmidt J.:
  Polyamide 11 nanocomposite feedstocks for powder bed fusion via liquid-liquid phase separation and crystallization
  In: Powder Technology 424 (2023), Article No.: 118563
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2023.118563
• Tomiak F., Zitzmann M., Drummer D.:
  A Multi-Material Flame-Retarding System Based on Expandable Graphite for Glass-Fiber-Reinforced PA6
  In: Polymers 15 (2023), Article No.: 4100
  ISSN: 2073-4360
  DOI: 10.3390/polym15204100
• Wolf M., Drummer D.:
  Structure formation in pin-like joining using vibration welding technology
  In: Journal of Advanced Joining Processes (2023), p. 100158
  ISSN: 2666-3309
  DOI: 10.1016/j.jajp.2023.100158

2022

• Cholewa S., Jaksch A., Drummer D.:
  Coalescence behavior of polyamide 12 as function of zero-shear viscosity and influence on mechanical performance
  SFF 2022 (Austin, Texas, 25. Juli 2022 - 27. Juli 2022)
• Greiner S., Drummer D.:
  Understanding aspect ratio effects in Laser Powder Bed Fusion of polyamide 12 by means of infrared thermal imaging
  12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, 4. September 2022 - 8. September 2022)
  In: M. Schmidt, F. Vollertsen, B.M. Colosimo (ed.): Procedia CIRP 2022
  DOI: 10.1016/j.procir.2022.08.060
• Jiang F., Drummer D.:
  Analysis of UV Curing Strategy on Reaction Heat Control and Part Accuracy for Additive Manufacturing
  In: Polymers 14 (2022), Article No.: 759
  ISSN: 2073-4360
  DOI: 10.3390/polym14040759
• Jiang F., Wörz A., Romeis M., Drummer D.:
  Analysis of UV-Assisted direct ink writing rheological properties and curing degree
  In: Polymer Testing 105 (2022), Article No.: 107428
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2021.107428
• Peng T., Li L., Zhou M., Jiang F.:
  Concentration of Microparticles Using Flexural Acoustic Wave in Sessile Droplets
  In: Sensors 22 (2022), Article No.: 1269
  ISSN: 1424-8220
  DOI: 10.3390/s22031269
• Roth B., Drummer D.:
  Druckabhängige Orientierungsrelaxation im dynamisch temperierten Spritzprägen
  In: Zeitschrift Kunststofftechnik 1 (2022), p. 1-23
  ISSN: 1864-2217
  DOI: 10.3139/o999.01012022
• Rösel U., Drummer D.:
  Possibilities in Recycling Magnetic Materials in Applications of Polymer-Bonded Magnets
  In: Magnetism 2 (2022), p. 251-270
  ISSN: 2673-8724
  DOI: 10.3390/magnetism2030019
• Rösel U., Drummer D.:
  Understanding the Effect of Material Parameters on the Processability of Injection-Molded Thermoset-Based Bonded Magnets
  In: Magnetism 2 (2022), p. 211-228
  ISSN: 2673-8724
  DOI: 10.3390/magnetism2030016
• Rösel U., Kneidl M., Drummer D., Franke J.:
  Possibilities of Integrated Fabrication of Insulation Systems in Electric Drives by Injection Molding of Thermosets
  In: Polymers 14 (2022), p. 5352
  ISSN: 2073-4360
  DOI: 10.3390/polym14245352
• Schlicht S., Greiner S., Drummer D.:
  Low Temperature Powder Bed Fusion of Polymers by Means of Fractal Quasi-Simultaneous Exposure Strategies
  In: Polymers 14 (2022), Article No.: 1428
  ISSN: 2073-4360
  DOI: 10.3390/polym14071428
• Schlicht S., Jaksch A., Drummer D.:
  Inline Quality Control through Optical Deep Learning-Based Porosity Determination for Powder Bed Fusion of Polymers
  In: Polymers 14 (2022), Article No.: 885
  ISSN: 2073-4360
  DOI: 10.3390/polym14050885
• Schneider K., Gothe B., Drexler M., Siltamaeki J., Weiger H., Seefried A., Drummer D.:
  The effect of dielectric and thermal properties of plastic mold materials on the high frequency welding of three-dimensional foam components
  In: Polymer Engineering and Science (2022)
  ISSN: 0032-3888
  DOI: 10.1002/pen.26112
• Schubert D., Herzog C., Drummer D.:
  In Situ Test Rig for the Measurement of the Operating Characteristics of Polymer Gears
  In: Zeitschrift Kunststofftechnik 1 (2022), p. 93-116
  ISSN: 1864-2217
  DOI: 10.3139/O999.02022022
• Wittmann LM., Drummer D.:
  Mechanical properties of thermoformed multilayer parts containing non thermoformable materials
  In: Journal of Plastic Film & Sheeting (2022), p. 875608792210939
  ISSN: 8756-0879
  DOI: 10.1177/87560879221093977
• Wittmann LM., Drummer D.:
  Two Layer Sheets for Processing Post-Consumer Materials
  In: Polymers 14 (2022)
  ISSN: 2073-4360
  DOI: 10.3390/polym14081507
• Wittmann LM., Kaschta J., Drummer D.:
  Biaxial Elongation Behavior in Partially Molted State of Two-Layer Sheets Containing Postconsumer Material
  In: Polymers 14 (2022), p. 3172
  ISSN: 2073-4360
  DOI: 10.3390/polym14153172
• Yuan S., Zhou M., Peng T., Li Q., Jiang F.:
  An investigation of chaotic mixing behavior in a planar microfluidic mixer
  In: Physics of Fluids 34 (2022)
  ISSN: 1070-6631
  DOI: 10.1063/5.0082831

2021

• Romeis M., Drummer D.:
  A dyciandiamine-based methacrylate-epoxy dual-cure blend-system for stereolithography
  In: Polymers 13 (2021), Article No.: 3139
  ISSN: 2073-4360
  DOI: 10.3390/polym13183139
• Schneider K., Ott C., Drummer D.:
  Simulative study of polymeric core-shell foam particles for the enlargement of the material portfolio in 3-D high-frequency welding
  In: Polymer Engineering and Science (2021)
  ISSN: 0032-3888
  DOI: 10.1002/pen.25861
• Tomiak F., Schoeffel A., Rathberger K., Drummer D.:
  A synergistic flame retardant system based on expandable graphite, aluminum (Diethyl-)polyphospinate and melamine polyphosphate for polyamide 6
  In: Polymers 13 (2021), Article No.: 2712
  ISSN: 2073-4360
  DOI: 10.3390/polym13162712

2020

• Heinl M., Greiner S., Wudy K., Pobel C., Rasch M., Huber F., Papke T., Merklein M., Schmidt M., Körner C., Drummer D., Hausotte T.:
  Measuring procedures for surface evaluation of additively manufactured powder bed based polymer and metal parts
  In: Measurement Science and Technology 31 (2020), p. 1-14
  ISSN: 1361-6501
  DOI: 10.1088/1361-6501/ab89e2
• Knorr VL., Setter R., Rietzel D., Wudy K., Osswald T.:
  Comparative Analysis of the Impact of Additively Manufactured Polymer Tools on the Fiber Configuration of Injection Molded Long-Fiber-Reinforced Thermoplastics
  In: Journal of Composites Science 4 (2020)
  ISSN: 2504-477X
  DOI: 10.3390/jcs4030136
• Mattner T., Drummer D.:
  Analysis of Contributive Forces In Intra-Laminar Shear of Continuous Fiber Reinforced Thermoplastics
  ANTEC® 2020: The Virtual Edition Proceedings
  In: ANTEC® 2020: The Virtual Edition Proceedings 2020
• Roth B., Drummer D.:
  Anwendungsoptimierte Druckverfestigung
  In: Zeitschrift Kunststofftechnik 2020 (2020), p. 108-132
  ISSN: 1864-2217
  DOI: 10.3139/O999.01042020
• Roth B., Drummer D.:
  Application optimized compression induced solidification
  In: International Journal of Plastics Technology 16 (2020)
  ISSN: 0972-656X
• Roth B., Wildner W., Drummer D.:
  Compression-Induced Solidification
  In: Polymers 12 (2020), Article No.: 488
  ISSN: 2073-4360
  DOI: 10.3390/polym12020488
• Thielen N., Werner D., Schmidt K., Seidel R., Reinhardt A., Franke J.:
  A Machine Learning Based Approach to Detect False Calls in SMT Manufacturing
  43rd International Spring Seminar on Electronics Technology, ISSE 2020 (Demanovska Valley, 14. Mai 2020 - 15. Mai 2020)
  In: Proceedings of the International Spring Seminar on Electronics Technology 2020
  DOI: 10.1109/ISSE49702.2020.9121044
• Topic N., Kruppa S., Drummer D.:
  Assistance Machine Function for BMC Injection Molding
  International Symposium on Plastics Technology (Aachen)
  In: ADVANCES IN POLYMER PROCESSING 2020, BERLIN: 2020
  DOI: 10.1007/978-3-662-60809-8_15
• Wang L., Wu W., Drummer D.:
  Construction of micro-thermal conductive network of self-assembled CNTs hybrids with 1D–0D structure
  In: Journal of Thermal Analysis and Calorimetry (2020)
  ISSN: 1388-6150
  DOI: 10.1007/s10973-020-10291-z
• Wang Y., Wu W., Drummer D., Liu C., Tomiak F., Schneider K., Huang Z.:
  Achieving a 3D thermally conductive while electrically insulating network in polybenzoxazine with a novel hybrid filler composed of boron nitride and carbon nanotubes
  In: Polymers 12 (2020), p. 1-18
  ISSN: 2073-4360
  DOI: 10.3390/polym12102331
• Werner J., Vetter L., Hertle S., Wolf M., Drummer D.:
  Air inclusions in the polymer melt functioning as intrinsic physical blowing agents for the generation of foams in rotational molding
  In: Cellular Polymers (2020)
  ISSN: 0262-4893
  DOI: 10.1177/0262489320920070
• Zhou M., Fu L., Jiang F., Jiang B., Drummer D.:
  Atomistic investigation on the wetting behavior and interfacial joining of polymer-metal interface
  In: Polymers 12 (2020), Article No.: 1696
  ISSN: 2073-4360
  DOI: 10.3390/POLYM12081696
• Zou Z., Wu W., Wang Y., Drummer D.:
  Biomass derived carbon aerogel as an ultrastable skeleton of form-stable phase change materials for efficient thermal energy storage
  In: Materials Research Express 7 (2020)
  ISSN: 2053-1591
  DOI: 10.1088/2053-1591/ab8584

2019

• Drummer D., Greiner S., Zhao M., Wudy K.:
  A novel approach for understanding laser sintering of polymers
  In: Additive Manufacturing 27 (2019), p. 379-388
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2019.03.012
• Greiner S., Lanzl L., Wudy K., Drummer D.:
  A new approach for getting more homegeneous temperature fields in selective laser sintering of polymers
  PPS (Polymer Processing Society) (Dresden, 26. Juni 2017 - 29. Juni 2017)
  In: AIP Conference Proceedings 2055 2019
  DOI: 10.1063/1.5084907
• Hertle S., Wörz A., Drummer D.:
  Analyse der Temperaturführung in der roboterbasierten Materialextrusion mit Polypropylen
  16th Rapid.Tech (Erfurt, 25. Juni 2019 - 27. Juni 2019)
  In: Proceedings of the 16th Rapid.Tech Conference 2019
  DOI: 10.3139/9783446462441.018
• Jiang B., Zhu L., Min L., Li X., Zhai Z., Drummer D.:
  Characterization of microchannel replicability of injection molded electrophoresis microfluidic chips
  In: Polymers 11 (2019), Article No.: 608
  ISSN: 2073-4360
  DOI: 10.3390/polym11040608
• Kleffel T., Frey P., Merklein M., Drummer D.:
  Analysis of the formation of gap-based leakages in polymer-metal electronic systems with labyrinth seals
  In: Journal of Polymer Engineering (2019)
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2019-0098
• Mattner T., Drummer D.:
  A new approach for assessing the deflection and bending properties of continuous fiber reinforced thermoplastics under processing conditions
  In: Polymer Testing 74 (2019), p. 77-85
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2018.12.024
• Roth B., Wildner W., Drummer D.:
  Analysis of the processing-pressure dependent refractive index of polycarbonate by transmission measurements of glass-filled specimen
  In: Polymer Engineering and Science (2019)
  ISSN: 0032-3888
  DOI: 10.1002/pen
• Ullmer A., Kleffel T., Zhai Z., Mattner T., Drummer D.:
  A Practical Approach for Validation of Aptitude of Sized Carbon Fibers for the In-Mould -Impregnation Process
  In: American Journal of Mechanical and Materials Engineering 3 (2019), p. 11-19
  ISSN: 2639-9628
  DOI: 10.11648/j.ajmme.20190301.12
• Wudy K., Drummer D.:
  Aging effects of polyamide 12 in selective laser sintering: Molecular weight distribution and thermal properties
  In: Additive Manufacturing 25 (2019)
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2018.11.007

2018

• Drummer D., Wudy K.:
  Additive Fertigung mit Kunststoffen: Potenziale, Entwicklungen und Trends
  In: Spritzgießen 2018, VDI Verlag GMBH, 2018, p. 53-64 (VDI Berichte)
• Hertle S., Mattner T., Drummer D.:
  Berücksichtigung des Druckniveaus bei der Viskositätsermittlung im Hochdruckkapillarrheometer
  9. CONNECT! European Moldflow User Meeting 2018 (Frankfurt, 5. Juni 2018 - 6. Juni 2018)
• Lexow M., Heller B., Maier F., Steinrück HP.:
  Anion Exchange at the Liquid/Solid Interface of Ultrathin Ionic Liquid Films on Ag(111)
  In: ChemPhysChem 19 (2018), p. 2978-2984
  ISSN: 1439-4235
  DOI: 10.1002/cphc.201800773
• Mattner T., Körbel W., Wrensch M., Drummer D.:
  Compensation of edge effects in picture frame testing of continuous fiber reinforced thermoplastics
  In: Composites Part B-Engineering 142 (2018), p. 95-101
  ISSN: 1359-8368
  DOI: 10.1016/j.compositesb.2018.01.009
• Wildner W., Drummer D.:
  Analysis of the processing-pressure dependent refractive index of Poly(methyl methacrylate) by transmission measurements of glass-filled specimen
  In: Polymer Testing 71 (2018), p. 217-222
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2018.09.011
• Wudy K., Drexler M., Lanzl L., Drummer D.:
  Analysis of time dependent thermal properties for high rates in selective laser sintering
  In: Rapid Prototyping Journal 24 (2018), p. 894-900
  ISSN: 1355-2546
  DOI: 10.1108/RPJ-01-2017-0013

2017

• Braun T., Greiner S., Baierl U., Drummer D., Franke J.:
  Additive Metallisierung von im Spritzguss hergestellten Keramiken mittels Plasma-Coating-Technologie
  In: PLUS - Produktion von Leiterplatten und Systemen 19 (2017), p. 985-1144
• Braun T., Greiner S., Diepgen A., Schröppel K., Drummer D., Franke J.:
  ADDITIVE METALLIZATION OF INJECTION MOLDED CERAMIC COMPONENTS BY A PLASMA-COATING PROCESS
  SMTA Pan Pacific Microelectronics Symposium (Kauai, Hawaii, 6. Februar 2017 - 9. Februar 2017)
  In: IEEE (ed.): Proceedings of the SMTA Pan Pacific Microelectronics Symposium, 2017 2017
• Goris S., Back T., Yanev A., Brands D., Drummer D., Osswald T.:
  A novel fiber length measurement technique for discontinuous fiber-reinforced composites: A comparative study with existing methods
  In: Polymer Composites (2017)
  ISSN: 1548-0569
  DOI: 10.1002/pc.24466
• Kleffel T., Drummer D., Kuhmann K.:
  Adhesion promoter for unequal pairs
  In: Kunststoffe International 107 (2017), p. 80-83
  ISSN: 1862-4243
• Löhner MJ., Drummer D.:
  Characterization of layer built-up and inter-layer boundaries in rotational molding of multi-material parts in dependency of the filling strategy
  In: Journal of Polymer Engineering 37 (2017), p. 411-420
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2016-0175
• Schiffers R., Topic N., Moser S., Drummer D.:
  A method for controlling the mold filling volume for BMC injection molding
  75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017 (Anaheim, CA, USA, 8. Mai 2017 - 10. Mai 2017)
  In: Annual Technical Conference - ANTEC, Conference Proceedings 2017
• Wörz A., Wudy K., Drummer D., Wegner A., Witt G.:
  Comparison of long-term properties of laser sintered and injection molded polyamide 12 parts
  In: Journal of Polymer Engineering (2017)
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2017-0227
• Zhai Z., Jiang By., Drummer D.:
  Characterization of nonlinear response in quasi-unidirectional E-glass fabric reinforced polypropylene composites under off-axis tensile loading
  In: Polymer Testing 63 (2017), p. 521-529
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2017.09.019

2016

• Braun T., Greiner S., Franke J., Drummer D.:
  Additive Plasma Metallization of Spatial Ceramic Injection Molded Components
  In: 12th International Congress Molded Interconnect Devices, 2016, p. 62--67
• Braun T., Greiner S., Franke J., Drummer D.:
  Additive Plasma Metallization of Spatial Ceramic Injection Molded Components
  12th International Congress Molded Interconnect Devices (Würzburg, 28. September 2016 - 29. September 2016)
  In: 12th International Congress Molded Interconnect Devices (MID): Scientific Proceedings 2016
  DOI: 10.1109/ICMID.2016.7738930
• Drummer D., Meister S., Wildner W.:
  Affecting processing and properties of injection moulded thin-wall parts using dynamic tempered rapid tooling moulds
  In: Zeitschrift Kunststofftechnik 2016 (2016), p. 1-30
  ISSN: 1864-2217
• Hertle S., Drexler M., Drummer D.:
  Additive Manufacturing of Poly(propylene) by Means of Melt Extrusion
  In: Macromolecular Materials and Engineering 301 (2016), p. 1482-1493
  ISSN: 1439-2054
  DOI: 10.1002/mame.201600259
• Schmidt J., Sachs M., Zhao M., Fanselow S., Wudy K., Drexler M., Drummer D., Wirth KE., Peukert W.:
  A novel process for production of spherical PBT powders and their processing behavior during laser beam melting
  31st International Conference of the Polymer Processing Society, PPS 2015 (Jeju Island Korea, 7. Juni 2015 - 11. Juni 2015)
  In: 31st International Conference of the POLYMER PROCESSING SOCIETY 2016
  DOI: 10.1063/1.4942343
• Wildner W., Drummer D.:
  A fiber optic temperature sensor based on the combination of epoxy and glass particles with different thermo-optic coefficients
  In: Photonic Sensors 6 (2016), p. 295-302
  ISSN: 1674-9251
  DOI: 10.1007/s13320-016-0328-6
• Wildner W., Drummer D.:
  A Fiber Optic Temperature Sensor Based on the Combination of Two Materials with Different Thermo-Optic Coefficients
  In: IEEE Sensors Journal 16 (2016), p. 688 - 692
  ISSN: 1530-437X
  DOI: 10.1109/JSEN.2015.2488979
• Wudy K., Drexler M., Lanzl L., Drummer D.:
  Analysis of time dependent thermal properties for high rates in selective laser sintering
  iCAT 2016 (Nürnberg, 29. November 2016 - 30. November 2016)
  In: Proceedings of 6th International Conference on Additive Technologies 2016
• Wudy K., Drummer D.:
  Aging Behavior of Polyamide 12 Interrelation between Bulk Characteristics and Part Properties
  27th Solid Freeform Fabrication Symposium (Austin, Tx, 8. August 2016 - 10. August 2016)
  In: Proceedings of the 27th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference 2016

2015

• Fischer C., Drummer D.:
  Beeinflussung von tribologischen Eigenschaften durch dynamische Temperierung
  In: Zeitschrift Kunststofftechnik 11 (2015), p. 1-26
  ISSN: 1864-2217
• Löhner MJ., Messingschlager S., Drummer D.:
  Computertomographie in der Kunststofftechnik
  TECHNOMER 2015 (Chemnitz)
  In: Fachbeiträge Technomer 2015 2015
• Wudy K., Drummer D.:
  Aging behavior of polyamide 12 during selective laser melting process - influence on mechanical properties
  ANTEC 2015 (Orlando, USA, 23. März 2015 - 25. März 2015)
  In: Society of Plastics Engineers (ed.): SPE Proceedings ANTEC 2015

2014

• Drummer D., Seefried A., Meister S.:
  Characterization of Material Stiffness on Injection Moulded Microspecimens Using Different Test Methods
  In: Advances in Materials Science and Engineering (2014), p. 8
  ISSN: 1687-8434
  DOI: 10.1155/2014/769206
• Fischer A., Ranft F., Drummer D.:
  Auslegungsstrategie für Hochleistungs-LED-Systeme auf Basis wärmeleitender Kunststoffe
  VDI - Kunststoffe in Optischen Systemen (Baden-Baden, 1. Oktober 2014)
• Plettke R., Schaub A., Gröschel C., Scheitler CJ., Heinle M., Ranft F., Merklein M., Schmidt M., Drummer D.:
  A new process chain for joining sheet metal to fibre composite sheets
  Material Forming ESAFORM 2014 (Finnland, 7. Mai 2014 - 9. Mai 2014)
  In: Key Engineering Materials (Volumes 611 - 612) 2014
  DOI: 10.4028/www.scientific.net/KEM.611-612.1468
• Plettke R., Schaub A., Gröschel C., Scheitler CJ., Vetter M., Hentschel O., Ranft F., Merklein M., Schmidt M., Drummer D.:
  A new process chain for joining sheet metal to fibre composite sheets
  In: Key Engineering Materials 611-612 (2014), p. 1468-1475
  ISSN: 1013-9826
  DOI: 10.4028/www.scientific.net/KEM.611-612.1468

2013

• Drummer D., Messingschlager S.:
  Auswirkungen differierender Füllgrade auf die Urform- und Sintereigentschaften im Keramikspritzguss
  In: Keramische Zeitschrift (2013), p. 36-40
  ISSN: 0023-0561
• Heinle M., Drummer D.:
  Calculation of the anisotropic, temperature-dependent thermal expansion coefficient (TEC) of parts made from short-fiber-reinforced polymers
  71st Annual Technical Conference of the Society of Plastics Engineers 2013, ANTEC 2013 (Cincinnati, OH)
  In: SPE Proceedings ANTEC 2013 2013
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84903525119&origin=inward
• Meister S., Drummer D.:
  Affecting the Ageing Behaviour of Injection-Moulded Microparts Using Variothermal Mould Tempering
  In: Advances in Mechanical Engineering (2013), Article No.: 407964
  ISSN: 1687-8132
  DOI: 10.1155/2013/407964
• Meister S., Drummer D.:
  Alterung bei Mikrospritzgießteilen - Einfluss variothermer Werkzeugtemperierung
  In: GIT Labor-Fachzeitschrift (2013), p. 300-302
  ISSN: 0016-3538
• Messingschlager S., Drummer D.:
  Ceramic injection molding - Material analysis, modeling and injection molding simulation
  29th Annual Meeting of the Polymer Processing Society (Nürnberg)
  In: Proceedings of the Polymer Processing Society 29th Annual Meeting 2013
• Messingschlager S., Heinle M., Drummer D.:
  Aufbereitung im Keramikspritzguss
  23. Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz)
  In: Technomer 2013 2013
• Ranft F., Drummer D.:
  Angepasste Füllstoffsysteme für das Spritzgießen von Kunststoffbauteilen mit erhöhter Wärmeleitfähigkeit
  23. Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz)
  In: Technomer 2013 2013
• Vittinghoff J., Drummer D.:
  Analyse des stoffschlüssigen Verbunds an Kunststoff-Metall-Hybridbauteilen
  13. Fachtagung - FTK - Fertigungstechnologie Kleben (Stuttgart)
  In: Fertigungstechnologie Kleben 2013
• Wudy K., Drummer D., Drexler M.:
  Characterization of polymer materials and powders for selective laser melting
  29th Annual Meeting of the Polymer Processing Society (Nürnberg)
  In: Proceedings of the Polymer Processing Society 29th Annual Meeting 2013

2012

• Drummer D., Hopmann C., Vetter K., Meister S., Fischer T., Piotter V., Prokop J., Ehrenstein G.:
  Analysis and Comparative Assessment of Different Process Technologies for Manufacturing Polymer Micro-Elements
  In: Materials Science and Engineering B-Advanced Functional Solid-State Materials 2 (2012), p. 347-362
  ISSN: 0921-5107
• Drummer D., Kobes M., Merken D.:
  A contribution for qualitatively modeling of friction and wear behavior of thermoplastics
  ANTEC 2012 (Orlando, 2. April 2012 - 4. April 2012)
  In: SPE Proceedings ANTEC 2012 2012
• Hartmann W., Hausotte T., Drummer D., Wudy K.:
  Anforderungen und Randbedingungen für den Einsatz optischer Messsysteme zur In-Line-Prüfung additiv gefertigter Bauteile
  Rapid.Tech 2012 (Erfurt)
  In: RTejournal - Forum für Rapid Technologie 2012
  URL: http://www.rtejournal.de/ausgabe9/3327/
• Heinle M., Goth C., Drummer D., Franke J.:
  Assembly Molding for Resistant Media Tight Molded Interconnect Devices
  15th Int. Conference Polymeric Materials (Halle)
  In: 15th Int. Conference Polymeric Materials 2012
• Jungmeier A., Wildner W., Drummer D., Kühnert I.:
  Compression-Induced Solidification: A Novel Processing Technique for Precise Thermoplastic Optical Components with Negligible Internal Stresses
  In: ISRN Optics 2012 (2012), Article No.: 872816
  ISSN: 2090-7826
  DOI: 10.5402/2012/872816
• Merken D., Drummer D.:
  Assembly injection molded friction clutches as mechanical overload protection for mechatronic devices
  2012 2nd International Electric Drives Production Conference, EDPC 2012 (Nürnberg)
  In: Electric Drives Production Conference 2012
  DOI: 10.1109/EDPC.2012.6425127

2011

• Drummer D., Gruber K., Meister S.:
  Alternating Temperature Technology Controls Parts Properties
  In: Kunststoffe International 101 (2011), p. 25-27
  ISSN: 1862-4243
• Drummer D., Vetter K.:
  Analyse von Skalierungseffekten beim Expansionsspritzgießen von Mikro- und Dünnwandbauteilen
  Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 (Karlsruhe)
  In: Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 2011
• Heinle M., Heinle C., Drummer D., Amesöder S.:
  Adhesive bonding between multi-material assembly injection molding parts with an adhesive interlayer
  In: Journal of Polymer Engineering 31 (2011), p. 539-548
  ISSN: 0334-6447
  DOI: 10.1515/POLYENG.2011.096
• Hörber J., Müller M., Franke J., Ranft F., Heinle C., Drummer D.:
  Assembly and Interconnection Technologies for MID based on Thermally Conductive Plastics for Heat Dissipation
  34th International Spring Seminar on Electronics Technology (High Tatras Slovakia, 11. Mai 2011 - 15. Mai 2011)
  In: 34th International Spring Seminar on Electronics Technology 2011
  DOI: 10.1109/ISSE.2011.6053559
• Ranft F., Drummer D., Hoffmann A.:
  Berücksichtigung temperaturabhängiger Stoffkennwerte bei der Auslegung optischer Systeme aus Kunststoff
  2. VDI-Fachkonferenz "Kunststoffe in Optischen Systemen" (Baden-Baden)
  In: Kunststoffe in Optischen Systemen 2011
• Tsigkopoulos T., Seefried A., Drummer D., Weidinger P., Bittermann J.:
  Auslegung langfaserverstärkter Thermoplastformteile
  In: Plastverarbeiter : neue Technologien, Kosteneffizienz, erhöhte Marktchancen 62 (2011), p. 160-163
  ISSN: 0032-1338

2010

• Heinle C., Heinle M., Drummer D., Ehrenstein G.:
  Assembly Molding of Tight Mechatronic System - A Model Approach
  In: Journal of Manufacturing Science and Engineering 132 (2010), p. 054505-1-054505-4
  ISSN: 1087-1357
  DOI: 10.1115/1.4002547
• Rietzel D., Kühnlein F., Drummer D.:
  Characterization of new thermoplastics for additive manufacturing by selective laser sintering
  68th Annual Technical Conference of the Society of Plastics Engineers 2010, ANTEC 2010 (Orlando, FL)
  URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=77956666230&origin=inward
• Wartzack S., Drummer D., Wittmann S., Stuppy J., Rietzel D., Tremmel S., Kühnlein F.:
  Besonderheiten bei der Auslegung und Gestaltung lasergesinterter Bauteile
  In: RTejournal - Forum für Rapid Technologie 7 (2010), p. -
  ISSN: 1614-0923

2009

• Krippner S., Feulner R., Kobes M., Hülder G., Drummer D.:
  2K-Hochleistungszahnräder - Läuft wie geschmiert
  In: Kunststoffe 99 (2009), p. 38-42
  ISSN: 0023-5563

2004

• Drummer D.:
  Combined bonded rotor for DC motors with different magnetic materials and field areas
  In: IEEE Transactions on Magnetics 40 (2004), p. 2077-2079
  ISSN: 0018-9464
  DOI: 10.1109/TMAG.2004.832280