Aufsätze
2023
Baumgärtner B. , Rothfelder R. , Greiner S. , Breuning C. , Renner J. , Schmidt M. , Drummer D. , Körner C. , Markl M. , Hausotte T. :Evaluation of Additively-Manufactured Internal Geometrical Features Using X-ray-Computed Tomography In: Journal of Manufacturing and Materials Processing (2023 )ISSN: 2504-4494 DOI: 10.3390/jmmp7030095
Cholewa S. , Jaksch A. , Drummer D. :Structure Development of Semi-crystalline Polymers in Laser Based Powder Bed Fusion Antec 2023 (Denver, Colorado , 27. März 2023 - 30. März 2023 )
Cholewa S. , Stieglitz L. , Jaksch A. , Rieger B. , Drummer D. :Tailored Syndiotactic Polypropylene Feedstock Material for Laser-Based Powder Bed Fusion of Polymers: Material Development and Processability In: ACS Applied Polymer Materials (2023 )ISSN: 2637-6105 DOI: 10.1021/acsapm.2c02112
Dong Y. , Jiang B. , Qiang J. , Ma Z. , Drummer D. , Zhang L. :Tuning formation process of void defects in microcolumn arrays via pulse reverse electrodeposition In: Journal of Materials Research and Technology 24 (2023 ), S. 3055-3066 ISSN: 2238-7854 DOI: 10.1016/j.jmrt.2023.03.201
Drummer D. , Schlicht S. , Greiner S. :Additive Manufacturing of Functionalized Material Systems for Medical Applications: Potentials and Challenges in Additive Manufacturing 8th International Conference on Additive Technologies iCAT 2023 (Maribor, Slowenien , 19. April 2023 - 22. April 2023 )
Greiner S. , Schlicht S. , Drummer D. :Understanding geometry dependent temperature fields in laser powder bed fusion of PA12 by means of infrared thermal imaging 8th International Conference on Additive Technologies iCAT (Maribor, Slowenien , 19. April 2023 - 22. April 2023 )
Herzog C. , Drummer D. :Test Rig for The In Situ Measurement of The Elastic Tooth
Deflection of Plastic Gears In: Polymers 15 (2023 ), Art.Nr.: 1732 ISSN: 2073-4360 DOI: 10.3390/polym15071732
Lu Z. , Wu W. , Drummer D. , Wang Y. , Liu C. , Li S. , Zhao X. :ZnO nanowire-decorated Al2O3/graphene aerogel for improving the thermal conductivity of epoxy composites In: Polymer Composites (2023 ) DOI: 10.1002/pc.27313
Ma Z. , Jiang B. , Dong Y. , Qiang J. , Drummer D. , Zhang L. :Electrodeposition model with dynamic ion diffusion coefficients for predicting void defects in electroformed microcolumn arrays In: Physical Chemistry Chemical Physics (2023 )ISSN: 1463-9076 DOI: 10.1039/d2cp05396a
Natale R. , Drummer D. :Improving the optical properties of achromatic lenses due to the process conditions Scholars 2nd Edition International Conference on Optics, Lasers and Photonics. 2023 (London )
Popp J. , Busch M. , Hausotte T. , Drummer D. :Fiber Orientation in continuous fiber reinforced thermoplastics/metal hybrid joining via multi-pin arrays In: Science and Engineering of Composite Materials 30 (2023 )ISSN: 0334-181X DOI: 10.1515/secm-2022-0165 URL: https://www.degruyter.com/document/doi/10.1515/secm-2022-0165/html
Popp J. , Wolf M. , Drummer D. :Fügen thermoplastischer Faserverbunde über Pin-Strukturen mit variablen Prozessrouten In: Werkstoffe in der Fertigung (2023 )ISSN: 0939-2629
Popp J. , Zirngibl C. , Schleich B. , Wartzack S. , Drummer D. :Influence of geometrical parameters of conic pin structures in thermoplastic composite/steel hybrid joining 20th International Conference on Sheet Metal, SHEMET 2023 (Erlangen, DEU , 2. April 2023 - 5. April 2023 )In: Marion Merklein, Hinnerk Hagenah, Joost R. Duflou, Livan Fratini, Fabrizio Micari, Paulo Martins, Gerson Meschut (Hrsg.): Materials Research Proceedings 2023 DOI: 10.21741/9781644902417-15
Rösel U. , Drummer D. :Extension of the Application Range of Multipolar Bonded Ring Magnets by Thermosets in Comparison to Thermoplastics In: Magnetism 3 (2023 ), S. 71-89 ISSN: 2673-8724 DOI: 10.3390/magnetism3010007
Rösel U. , Drummer D. :Rotor-integrierte Dauermagnete – Spritzguss in der Antriebstechnik VDI Fachtagung Spritzgießen
Rösel U. , Kneidl M. , Franke J. , Drummer D. :Improving the integrated fabrication of insulation systems in electric drives by injection molding of thermosets due to processing conditions and slot design In: Polymers (2023 ), S. 1-20 ISSN: 2073-4360 DOI: 10.3390/polym15051165
Schlicht S. , Cholewa S. , Drummer D. :Process-Structure-Property Interdependencies in Non-Isothermal Powder Bed Fusion of Polyamide 12 In: Journal of Manufacturing and Materials Processing 7 (2023 ), Art.Nr.: 33 ISSN: 2504-4494 DOI: 10.3390/jmmp7010033
Schlicht S. , Drummer D. :Accelerated Powder Bed Fusion of Polypropylene Using Superposed Fractal Exposure Strategies 8th International Conference on Additive Technologies (Maribor , 19. April 2023 - 22. April 2023 )
Schlicht S. , Drummer D. :Eutectic In Situ Modification of Polyamide 12 Processed through Laser-Based Powder Bed Fusion In: Materials 16 (2023 ), Art.Nr.: 2050 ISSN: 1996-1944 DOI: 10.3390/ma16052050
Schlicht S. , Drummer D. :Thermal Intra-Layer Interaction of Discretized Fractal Exposure Strategies in Non-Isothermal Powder Bed Fusion of Polypropylene EMPOrIA - International Joint Conference 2023 (Aachen , 16. Mai 2023 - 17. Mai 2023 )
Schlicht S. , Drummer D. :Thermal Intra-Layer Interaction of Discretized Fractal Exposure Strategies in Non-Isothermal Powder Bed Fusion of Polypropylene In: Journal of Manufacturing and Materials Processing 7 (2023 ), Art.Nr.: 63 ISSN: 2504-4494 DOI: 10.3390/jmmp7020063
Schubert D. , Wolf M. , Drummer D. :Interaction of tool and process design on the mechanical and tribological behaviour of an injection-moulded polyamide-steel gear set In: Polymer Testing (2023 ), S. 107982 ISSN: 0142-9418 DOI: 10.1016/j.polymertesting.2023.107982
Tischer F. , Cholewa S. , Düsenberg B. , Drummer D. , Peukert W. , Schmidt J. :Polyamide 11 nanocomposite feedstocks for powder bed fusion via liquid-liquid phase separation and crystallization In: Powder Technology 424 (2023 ), Art.Nr.: 118563 ISSN: 0032-5910 DOI: 10.1016/j.powtec.2023.118563
Werner J. , Drummer D. :Influence of particle geometry and size on the cell morphology of vacuum assisted rotationally molded foam In: Cellular Polymers Online First (2023 )ISSN: 0262-4893 DOI: 10.1177/02624893231171662 URL: https://journals.sagepub.com/doi/10.1177/02624893231171662
Wolf M. , Kleffel T. , Drummer D. :Functionalization of series components by joining laser-sintered with injection-molded parts: Weld seam characteristics in vibration welding In: Composites and Advanced Materials 32 (2023 )ISSN: 2634-9833 DOI: 10.1177/26349833231165320
Yuan S. , Zhou M. , Liu X. , Li Q. , Drummer D. , Jiang B. :Investigation of parameters and porous plug enhanced enrichment with field-amplified sample stacking in microchip In: Physics of Fluids 35 (2023 )ISSN: 1070-6631 DOI: 10.1063/5.0135314
2022
Amesöder S. , Ehrenstein G. :Thermisch leitfahig modifizierte Funktionskunststoffe In: International Journal of Materials Research 94 (2022 ), S. 606-609 ISSN: 1862-5282 DOI: 10.1515/ijmr-2003-0105
Cholewa S. , Drummer D. :Crystallization behavior under process conditions in Powder Bed Fusion of polymers 12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, DEU , 4. September 2022 - 8. September 2022 )In: M. Schmidt, F. Vollertsen, B.M. Colosimo (Hrsg.): Procedia CIRP 2022 DOI: 10.1016/j.procir.2022.08.108
Cholewa S. , Drummer D. :Prozessnahe simultane Bestimmung des Kristallisations- und Fließverhaltens von PA 12 im Lasersintern Rapid.Tech 3D Druck (Erfurt , 17. Mai 2022 - 19. Mai 2022 )
Cholewa S. , Jaksch A. , Drummer D. :Coalescence behavior of polyamide 12 as function of zero-shear viscosity and influence on mechanical performance SFF 2022 (Austin, Texas , 25. Juli 2022 - 27. Juli 2022 )
Drummer D. , Greiner S. , Grützmacher C. , Jiang F. , Kleffel T. , Romeis M. , Schlicht S. , Wolf M. :Neue Werkstoffe und Prozesse für die additive Fertigung In: Jahresmagazin Ingenieurwissenschaften (2022 )ISSN: 1618-8357 Open Access: https://institut-wv.de/wp-content/uploads/sites/9/2022/10/096-681_WAK-Kunststoff_2022.pdf
Fu L. , Zhang M. , Zhai Z. , Jiang F. :The influence of preheating temperature on the mechanical properties of injection-overmolded hybrid glass fiber reinforced thermoplastic composites In: Polymer Testing 105 (2022 )ISSN: 0142-9418 DOI: 10.1016/j.polymertesting.2021.107425
Greiner S. , Drummer D. :Understanding aspect ratio effects in Laser Powder Bed Fusion of polyamide 12 by means of infrared thermal imaging 12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen , 4. September 2022 - 8. September 2022 )In: M. Schmidt, F. Vollertsen, B.M. Colosimo (Hrsg.): Procedia CIRP 2022 DOI: 10.1016/j.procir.2022.08.060
Herzog C. , Wolf M. , Drummer D. :In Situ Measured Tooth Flank Wear of Plastic Gears under Spectrum Loading In: Polymers 14 (2022 ), S. 5239 ISSN: 2073-4360 DOI: 10.3390/polym14235239
Herzog C. , Wolf M. , Schubert D. , Drummer D. :In situ investigation of the influence of varying load conditions on tooth deformation and wear of polymer gears In: Forschung Im Ingenieurwesen-Engineering Research (2022 )ISSN: 0015-7899 DOI: 10.1007/s10010-022-00591-1
Jaksch A. , Cholewa S. , Drummer D. :Understanding geometry dependent part behavior of thin walled structures in powder bed fusion of polymers 12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, DEU , 4. September 2022 - 8. September 2022 )In: M. Schmidt, F. Vollertsen, B.M. Colosimo (Hrsg.): Procedia CIRP 2022 DOI: 10.1016/j.procir.2022.08.109
Jiang F. , Drummer D. :Analysis of UV Curing Strategy on Reaction Heat Control and Part Accuracy for Additive Manufacturing In: Polymers 14 (2022 ), Art.Nr.: 759 ISSN: 2073-4360 DOI: 10.3390/polym14040759
Jiang F. , Wörz A. , Romeis M. , Drummer D. :Analysis of UV-Assisted direct ink writing rheological properties and curing degree In: Polymer Testing 105 (2022 ), Art.Nr.: 107428 ISSN: 0142-9418 DOI: 10.1016/j.polymertesting.2021.107428
Jiang F. , Zhou M. , Drummer D. :Effects of Fumed Silica on Thixotropic Behavior and Processing Window by UV-Assisted Direct Ink Writing In: Polymers 14 (2022 )ISSN: 2073-4360 DOI: 10.3390/polym14153107
Meschut G. , Merklein M. , Brosius A. , Drummer D. , Fratini L. , Füssel U. , Gude M. , Homberg W. , Martins PAF. , Bobbert M. , Lechner M. , Kupfer R. , Gröger B. , Han D. , Kalich J. , Kappe F. , Kleffel T. , Köhler D. , Kuball CM. , Popp J. , Römisch D. , Troschitz J. , Wischer C. , Wituschek S. , Wolf M. :Review on mechanical joining by plastic deformation In: Journal of Advanced Joining Processes (2022 )ISSN: 2666-3309 DOI: 10.1016/j.jajp.2022.100113
Ott C. , Drummer D. :In-situ leakage behavior of polymer-metal hybrids under mechanical load In: International Polymer Processing (2022 )ISSN: 0930-777X DOI: 10.1515/ipp-2022-4229
Ott C. , Drummer D. :Reducing component stress during encapsulation of electronics: a simulative examination of thermoplastic foam injection molding In: Journal of Polymer Engineering (2022 )ISSN: 0334-6447 DOI: 10.1515/polyeng-2022-0150
Peng T. , Li L. , Zhou M. , Jiang F. :Concentration of Microparticles Using Flexural Acoustic Wave in Sessile Droplets In: Sensors 22 (2022 ), Art.Nr.: 1269 ISSN: 1424-8220 DOI: 10.3390/s22031269
Popp J. , Drummer D. :Joining of continuous fiber reinforced thermoplastic/steel hybrid parts via undercutting pin structures and infrared heating In: Journal of Advanced Joining Processes 5 (2022 ), Art.Nr.: 100084 ISSN: 2666-3309 DOI: 10.1016/j.jajp.2021.100084
Popp J. , Drummer D. :Joining of steel/CFRT-hybrid parts via non-rotational symmetric cold formed pin structures Hybrid 2022 (Leoben , 20. Juli 2022 - 22. Juli 2022 )
Popp J. , Römisch D. , Merklein M. , Drummer D. :Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures In: Applied Sciences 12 (2022 )ISSN: 2076-3417 DOI: 10.3390/app12104962
Roth B. , Drummer D. :Druckabhängige Orientierungsrelaxation im dynamisch temperierten Spritzprägen In: Zeitschrift Kunststofftechnik 1 (2022 ), S. 1-23 ISSN: 1864-2217 DOI: 10.3139/o999.01012022
Roth B. , Frank R. , Kleffel T. , Schneider K. , Drummer D. :High-Precision Thin Wall Bipolar Plates for Fuel Cell Applications via Injection Compression Molding with Dynamic Mold Temperature Control In: Polymers 14 (2022 ), Art.Nr.: 2799 ISSN: 2073-4360 DOI: 10.3390/polym14142799
Rösel U. , Drummer D. :Possibilities in Recycling Magnetic Materials in Applications of Polymer-Bonded Magnets In: Magnetism 2 (2022 ), S. 251-270 ISSN: 2673-8724 DOI: 10.3390/magnetism2030019
Rösel U. , Drummer D. :Simulationsgestützte Auslegung eines Spritzgießwerkzeugs zur Herstellung von kunststoffgebundenen Dauermagneten auf Duroplast Basis In: Werkstoffe in der Fertigung (2022 ), S. 22-26 ISSN: 0939-2629
Rösel U. , Drummer D. :Understanding the Effect of Material Parameters on the Processability of Injection-Molded Thermoset-Based Bonded Magnets In: Magnetism 2 (2022 ), S. 211-228 ISSN: 2673-8724 DOI: 10.3390/magnetism2030016
Rösel U. , Kneidl M. , Drummer D. , Franke J. :Possibilities of Integrated Fabrication of Insulation Systems in Electric Drives by Injection Molding of Thermosets In: Polymers 14 (2022 ), S. 5352 ISSN: 2073-4360 DOI: 10.3390/polym14245352
Schlicht S. , Greiner S. , Drummer D. :Low Temperature Powder Bed Fusion of Polymers by Means of Fractal Quasi-Simultaneous Exposure Strategies In: Polymers 14 (2022 ), Art.Nr.: 1428 ISSN: 2073-4360 DOI: 10.3390/polym14071428
Schlicht S. , Jaksch A. , Drummer D. :Inline Quality Control through Optical Deep Learning-Based Porosity Determination for Powder Bed Fusion of Polymers In: Polymers 14 (2022 ), Art.Nr.: 885 ISSN: 2073-4360 DOI: 10.3390/polym14050885
Schneider K. , Gothe B. , Drexler M. , Siltamaeki J. , Weiger H. , Seefried A. , Drummer D. :The effect of dielectric and thermal properties of plastic mold materials on the high frequency welding of three-dimensional foam components In: Polymer Engineering and Science (2022 )ISSN: 0032-3888 DOI: 10.1002/pen.26112
Schubert D. , Herzog C. , Drummer D. :In Situ Test Rig for the Measurement of the Operating Characteristics of Polymer Gears In: Zeitschrift Kunststofftechnik 1 (2022 ), S. 93-116 ISSN: 1864-2217 DOI: 10.3139/O999.02022022
Schubert D. , Rohrmoser A. , Herzog C. , Wolf M. , Hagenah H. , Merklein M. , Drummer D. :Influence of production process-induced surface topologies at varying roughness depths on the tribological properties of polyamide steel contact In: Journal of Polymer Engineering (2022 )ISSN: 0334-6447 DOI: 10.1515/polyeng-2022-0231
Tomiak F. , Drummer D. :The Impact of beta-Radiation Crosslinking on Flammability Properties of PA6 Modified by Commercially Available Flame-Retardant Additives In: Polymers 14 (2022 )ISSN: 2073-4360 DOI: 10.3390/polym14153168
Tomiak F. , Schneider K. , Schoeffel A. , Rathberger K. , Drummer D. :Expandable Graphite as a Multifunctional Flame-Retarding Additive for Highly Filled Thermal Conductive Polymer Formulations In: Polymers 14 (2022 )ISSN: 2073-4360 DOI: 10.3390/polym14081613
Tomiak F. , Schoeffel A. , Rathberger K. , Drummer D. :Expandable Graphite, Aluminum Diethylphospinate and Melamine Polyphosphate as Flame Retarding System in Glass Fiber-Reinforced PA6 In: Polymers 14 (2022 )ISSN: 2073-4360 DOI: 10.3390/polym14061263
Wittmann LM. , Drummer D. :Mechanical properties of thermoformed multilayer parts containing non thermoformable materials In: Journal of Plastic Film & Sheeting (2022 ), S. 875608792210939 ISSN: 8756-0879 DOI: 10.1177/87560879221093977
Wittmann LM. , Drummer D. :Two Layer Sheets for Processing Post-Consumer Materials In: Polymers 14 (2022 )ISSN: 2073-4360 DOI: 10.3390/polym14081507
Wittmann LM. , Kaschta J. , Drummer D. :Biaxial Elongation Behavior in Partially Molted State of Two-Layer Sheets Containing Postconsumer Material In: Polymers 14 (2022 ), S. 3172 ISSN: 2073-4360 DOI: 10.3390/polym14153172
Wolf M. , Beiß T. , Drummer D. :Neuartiges Werkzeugkonzept zum Schweißen von komplexen Bauteilen aus Kunststoffen in Klein- und Kleinstserien In: Konstruktion (2022 ), S. 70-74 ISSN: 0720-5953
Wolf M. , Beiß T. , Drummer D. :Neuartiges Werkzeugkonzept zum Schweißen von komplexen Bauteilen aus Kunststoffen in Klein- und Kleinstserien In: Konstruktion 74 (2022 ), S. 70-74 ISSN: 0720-5953 DOI: 10.37544/0720-5953-2022-10-70
Wolf M. , Drummer D. :Filling Behavior in Joining Using Pin-like Structures In: Polymers 14 (2022 ), S. 3083 ISSN: 2073-4360 DOI: 10.3390/polym14153083
Wolf M. , Drummer D. :Separation of Multi-Material Polymer Combinations Produced by Joining Using Pin-like Structures In: Journal of Manufacturing and Materials Processing 6 (2022 ), Art.Nr.: 13 ISSN: 2504-4494 DOI: 10.3390/jmmp6010013
Wolf M. , Drummer D. :Weld peculiarities of infrared-welded joints between laser-sintered and injection-moulded components In: Joining Plastics - Fügen von Kunststoffen 16 (2022 ), S. 166-173 ISSN: 1864-3450
Yuan S. , Jiang B. , Jiang F. , Drummer D. , Zhou M. :Numerical and experimental investigation of mixing enhancement in the passive planar mixer with bent baffles In: International Journal of Heat and Mass Transfer 191 (2022 )ISSN: 0017-9310 DOI: 10.1016/j.ijheatmasstransfer.2022.122815
Yuan S. , Jiang B. , Peng T. , Zhou M. , Drummer D. :Investigation of efficient mixing enhancement in planar micromixers with short mixing length In: Chemical Engineering and Processing 171 (2022 ), Art.Nr.: 108747 ISSN: 0255-2701 DOI: 10.1016/j.cep.2021.108747
Yuan S. , Zhou M. , Peng T. , Li Q. , Jiang F. :An investigation of chaotic mixing behavior in a planar microfluidic mixer In: Physics of Fluids 34 (2022 )ISSN: 1070-6631 DOI: 10.1063/5.0082831
Zirngibl C. , Kügler P. , Popp J. , Bielak CR. , Bobbert M. , Drummer D. , Meschut G. , Wartzack S. , Schleich B. :Provision of cross-domain knowledge in mechanical joining using ontologies In: Production Engineering (2022 ), S. 327 - 338 ISSN: 0944-6524 DOI: 10.1007/s11740-022-01117-y
2021
Deringer T. , Drummer D. :In situ curing and bonding of epoxy prepregs in epoxy thermoset injection molding In: International Journal of Advanced Manufacturing Technology (2021 )ISSN: 0268-3768 DOI: 10.1007/s00170-021-07838-1
Drummer D. , Grützmacher C. , Kleffel T. , Lanzl L. , Rösel U. , Roth B. , Schneider K. , Tomiak F. , Wittmann LM. :Hochgefüllte Kunststoffe: Neue Potenziale durch den Einsatz von Füllstoffen zur gezielten Eigenschaftsmodifikation In: Jahresmagazin Ingenieurwissenschaften (2021 ), S. 38-45 ISSN: 1618-8357 Open Access: https://institut-wv.de/wp-content/uploads/sites/9/2021/10/096-650_WAK-Kunststoff_2021_s.pdf
Greiner S. , Jaksch A. , Cholewa S. , Drummer D. :Development of material-adapted processing strategies for laser sintering of polyamide 12 In: Advanced Industrial and Engineering Polymer Research (2021 ) DOI: 10.1016/j.aiepr.2021.05.002
Greiner S. , Jaksch A. , Drummer D. :Materialangepasste Prozessstrategien für das Lasersintern von Kunststoffen 27. Technomer - Fachtagung über Verarbeitung und Anwendung von Polymeren (Technische Universität Chemnitz , 4. November 2021 - 5. November 2021 )
Greiner S. , Schlicht S. , Drummer D. :Temperaturfeldhomogenisierung durch fraktale Belichtungsstrategien im Lasersintern von Kunststoffen Rapid.Tech (, 22. Juni 2021 - 23. Juni 2021 )In: Proceedings of the 17th Rapid.Tech Conference 2021
Huang Z. , Wu W. , Drummer D. , Liu C. , Wang Y. , Wang Z. :Enhanced the thermal conductivity of polydimethylsiloxane via a three-dimensional hybrid boron nitride@silver nanowires thermal network filler In: Polymers 13 (2021 ), S. 1-10 ISSN: 2073-4360 DOI: 10.3390/polym13020248
Huang Z. , Wu W. , Drummer D. , Liu C. , Wang Y. , Wang Z. :Multi-contact hybrid thermal conductive filler Al2O3@AgNPs optimized three-dimensional thermal network for flexible thermal interface materials In: Journal of Applied Polymer Science (2021 )ISSN: 0021-8995 DOI: 10.1002/app.50889
Jaksch A. , Hesse N. , Schmidt J. , Drummer D. :Selektives Laserstrahlschmelzen von Polyamid 12 - Einfluss von Fließhilfsmitteln auf Verarbeitbarkeit und Bauteileigenschaften Rapid.Tech 2021 (, 22. Juni 2021 - 23. Juni 2021 )In: Proceedings of the 17th Rapid.Tech Conference 2021
Lanzl L. , Drummer D. :Process Behavior of Short Glass Fiber Filled Systems during Powder Bed Fusion and Its Effect on Part Dimensions In: Polymers 13 (2021 ), Art.Nr.: 3144 ISSN: 2073-4360 DOI: 10.3390/polym13183144
Liu C. , Wu W. , Drummer D. , Wang Y. , Chen Q. , Liu X. , Schneider K. :Significantly enhanced thermal conductivity of polymer composites via establishing double-percolated expanded graphite/multi-layer graphene hybrid filler network In: European Polymer Journal 160 (2021 )ISSN: 0014-3057 DOI: 10.1016/j.eurpolymj.2021.110768
Ott C. , Drummer D. :Low-stress over-molding of media-tight electronics using thermoplastic foam injection molding In: Polymer Engineering and Science (2021 )ISSN: 1548-2634 DOI: 10.1002/pen.25672
Peng T. , Fan C. , Zhou M. , Jiang F. , Drummer D. , Jiang B. :Rapid Enrichment of Submicron Particles within a Spinning Droplet Driven by a Unidirectional Acoustic Transducer In: Analytical Chemistry (2021 )ISSN: 0003-2700 DOI: 10.1021/acs.analchem.1c02914
Piott F. , Krämer A. , Lück A. , Hoffmann L. , Mitschang P. , Drummer D. :Increasing the performance of continuous compression moulding by local pressure adaption In: Advanced Manufacturing: Polymer and Composites Science (2021 )ISSN: 2055-0340 DOI: 10.1080/20550340.2021.1888209
Popp J. , Kleffel T. , Drummer D. :Influence of pin geometry on the joint strength of
CFRT-metal hybrid parts with metallic pins In: Joining Plastics - Fügen von Kunststoffen (2021 ), S. 177-183 ISSN: 1864-3450
Popp J. , Kleffel T. , Römisch D. , Papke T. , Merklein M. , Drummer D. :Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins In: Applied Composite Materials (2021 )ISSN: 0929-189X DOI: 10.1007/s10443-021-09892-0
Popp J. , Wolf M. , Mattner T. , Drummer D. :Energy Direction in Ultrasonic Impregnation of Continuous Fiber-Reinforced Thermoplastics In: Journal of Composites Science 5 (2021 ), Art.Nr.: 239 ISSN: 2504-477X DOI: 10.3390/jcs5090239
Qiang J. , Jiang B. , Dong Y. , Roth B. , Jiang F. :Extension of the Stoney formula for the incremental stress of thin films In: Applied Physics Letters 118 (2021 ), Art.Nr.: 091604 ISSN: 0003-6951 DOI: 10.1063/5.0038257
Romeis M. , Drummer D. :A dyciandiamine-based methacrylate-epoxy dual-cure blend-system for stereolithography In: Polymers 13 (2021 ), Art.Nr.: 3139 ISSN: 2073-4360 DOI: 10.3390/polym13183139
Roth B. , Drummer D. :Isotropy of mechanical properties and environmental stress crack sensitivity in injection- and injection-compression molding of polystyrene with different mold temperature In: Polymer Engineering and Science (2021 ), S. 1-10 ISSN: 0032-3888 DOI: 10.1002/pen.25793
Roth B. , Drummer D. :Pressure Equilibrium Time of a Cyclic-Olefin Copolymer In: Polymers 13 (2021 ), Art.Nr.: 15 ISSN: 2073-4360 DOI: 10.3390/polym13142309
Rothfelder R. , Lanzl L. , Selzam JH. , Drummer D. , Schmidt M. :Vibrational Microfeeding of Polymer and Metal Powders for Locally Graded Properties in Powder-Based Additive Manufacturing In: Journal of Materials Engineering and Performance (2021 )ISSN: 1059-9495 DOI: 10.1007/s11665-021-06271-5
Römisch D. , Popp J. , Drummer D. , Merklein M. :Joining of CFRT-steel hybrid parts via hole-forming and subsequent pin caulking In: Production Engineering (2021 )ISSN: 0944-6524 DOI: 10.1007/s11740-021-01093-9
Rösel U. , Drummer D. :Correlation between the Flow and Curing Behavior of Hard Magnetic Fillers in Thermosets and the Magnetic Properties In: Magnetism (2021 ), S. 37-57 ISSN: 2673-8724 DOI: 10.3390/magnetism1010004
Rösel U. , Drummer D. :Injection Moulding of Multipolar Polymer-Bonded Magnets into Soft Magnetic Inserts for Rotors in Reluctance Motors In: Magnetism (2021 ), S. 3-21 ISSN: 2673-8724 DOI: 10.3390/magnetism1010004
Rösel U. , Drummer D. , Köjer M. :Fertigung eines Spritzgießwerkzeuges zur Herstellung von Flusssperren aus kunststoffgebundenen Dauermagneten in einem Synchron-Reluktanzmotor In: Werkstoffe in der Fertigung (2021 )ISSN: 0939-2629
Schneider K. , Ott C. , Drummer D. :Simulative study of polymeric core-shell foam particles for the enlargement of the material portfolio in 3-D high-frequency welding In: Polymer Engineering and Science (2021 )ISSN: 0032-3888 DOI: 10.1002/pen.25861
Schulte-Hubbert F. , Drummer D. , Hoffmann L. :Model Approach for Displaying Dynamic Filament Displacement during Impregnation of Continuous Fibres Based on the Theory of Similarity - Theory and Modelling In: International Polymer Processing 36 (2021 ), S. 423-434 ISSN: 0930-777X DOI: 10.1515/ipp-2020-4020
Tomiak F. , Rathberger K. , Schoeffel A. , Drummer D. :Expandable Graphite for Flame Retardant PA6 Applications In: Polymers 13 (2021 ), Art.Nr.: 2733 ISSN: 2073-4360 DOI: 10.3390/polym13162733
Tomiak F. , Schoeffel A. , Rathberger K. , Drummer D. :A synergistic flame retardant system based on expandable graphite, aluminum (Diethyl-)polyphospinate and melamine polyphosphate for polyamide 6 In: Polymers 13 (2021 ), Art.Nr.: 2712 ISSN: 2073-4360 DOI: 10.3390/polym13162712
Wittmann LM. , Drummer D. :Multilayer sheets for thermoforming non thermoformable polymers In: Journal of Plastic Film & Sheeting (2021 )ISSN: 8756-0879 DOI: 10.1177/87560879211037387
Wolf M. , Drummer D. :Design criteria for the pin-foot ratio for joining adhesion-incompatible polymers using pin-like structures in vibration welding process In: Journal of Polymer Engineering (2021 )ISSN: 0334-6447 DOI: 10.1515/polyeng-2021-0199
Wu W. , Zeng K. , Zhao B. , Duan F. , Jiang F. :New Considerations on the Determination of the Apparent Shear Viscosity of Polymer Melt with Micro Capillary Dies In: Polymers 13 (2021 )ISSN: 2073-4360 DOI: 10.3390/polym13244451
2020
Deringer T. , Drummer D. :The influence of mold temperature on thermoset in-mold forming In: Journal of Polymer Engineering (2020 )ISSN: 0334-6447 DOI: 10.1515/polyeng-2019-0322
Fleck A. , Wöllner T. :The Impact of Examples on Creativity: Gender Differences in Fixation Effects In: Brem A., Bican P., Wimschneider C. (Hrsg.): Gender Differences in Technology and Innovation Management - Insights from Experimental Research , München : De Gruyter Studies in Innovation and Entrepreneurship , 2020 , S. 7-28 ISBN: 978-3-11-059079-1 DOI: 10.1515/9783110593952-002
Greiner S. , Drummer D. :Infrared monitoring of modified hatching strategies for laser sintering of polymers 11th CIRP Conference on Photonic Technologies / LANE 2020 (, 6. September 2020 - 10. September 2020 )In: Procedia CIRP 2020 DOI: 10.1016/j.procir.2020.09.018
Greiner S. , Jaksch A. , Drummer D. :Understanding Cylinder Temperature Effects in Laser Beam Melting of Polymers 1st International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020 (, 19. Mai 2020 - 20. Mai 2020 )In: Lecture Notes in Mechanical Engineering 2020 DOI: 10.1007/978-3-030-70332-5_12
Heinl M. , Greiner S. , Wudy K. , Pobel C. , Rasch M. , Huber F. , Papke T. , Merklein M. , Schmidt M. , Körner C. , Drummer D. , Hausotte T. :Measuring procedures for surface evaluation of additively manufactured powder bed based polymer and metal parts In: Measurement Science and Technology 31 (2020 ), S. 1-14 ISSN: 1361-6501 DOI: 10.1088/1361-6501/ab89e2
Hertle S. , Kleffel T. , Wörz A. , Drummer D. :Production of polymer-metal hybrids using extrusion-based additive manufacturing and electrochemically treated aluminum In: Additive Manufacturing 33 (2020 ), Art.Nr.: 101135 ISSN: 2214-7810 DOI: 10.1016/j.addma.2020.101135
Jiang F. , Drummer D. :Curing Kinetic Analysis of Acrylate Photopolymer for Additive Manufacturing by Photo-DSC In: Polymers 12 (2020 )ISSN: 2073-4360 DOI: 10.3390/polym12051080
Knorr VL. , Setter R. , Rietzel D. , Wudy K. , Osswald T. :Comparative Analysis of the Impact of Additively Manufactured Polymer Tools on the Fiber Configuration of Injection Molded Long-Fiber-Reinforced Thermoplastics In: Journal of Composites Science 4 (2020 )ISSN: 2504-477X DOI: 10.3390/jcs4030136
Kugler S. , Cruz C. , Kech A. , Chang TC. , Osswald T. :Workflow for enhanced fiber orientation prediction of short fiber-reinforced thermoplastics SPE ANTEC 2020: Annual Technical Conference for Plastic Professionals (, 30. März 2020 - 5. Mai 2020 )In: Annual Technical Conference - ANTEC, Conference Proceedings 2020
Kugler S. , Lambert GM. , Cruz C. , Kech A. , Osswald TA. , Baird DG. :Efficient parameter identification for macroscopic fiber orientation models with experimental data and a mechanistic fiber simulation 35th International Conference of the Polymer Processing Society, PPS 2019 (Cesme-Izmir , 26. Mai 2019 - 30. Mai 2019 )In: Fevzi Cakmak Cebeci, Yusuf Z. Menceloglu, Serkan Unal, Yakup Ulcer (Hrsg.): AIP Conference Proceedings 2020 DOI: 10.1063/1.5142965
Kugler S. , Lambert GM. , Cruz C. , Kech A. , Osswald TA. , Baird DG. :Macroscopic fiber orientation model evaluation for concentrated short fiber reinforced polymers in comparison to experimental data In: Polymer Composites (2020 )ISSN: 0272-8397 DOI: 10.1002/pc.25553
Lanzl L. , Wudy K. , Drummer D. :The effect of short glass fibers on the process behavior of polyamide 12 during selective laser beam melting In: Polymer Testing (2020 )ISSN: 0142-9418 DOI: 10.1016/j.polymertesting.2019.106313
Liu C. , Wu W. , Drummer D. , Shen W. , Wang Y. , Schneider K. , Tomiak F. :ZnO nanowire-decorated Al2O3hybrids for improving the thermal conductivity of polymer composites In: Journal of Materials Chemistry C 8 (2020 ), S. 5380-5388 ISSN: 2050-7526 DOI: 10.1039/c9tc06805h
Mattner T. , Drummer D. :Analysis of Contributive Forces In Intra-Laminar Shear of Continuous Fiber Reinforced Thermoplastics ANTEC® 2020: The Virtual Edition Proceedings In: ANTEC® 2020: The Virtual Edition Proceedings 2020
Mattner T. , Popp J. , Kleffel T. , Gröschel C. , Drummer D. :High Speed Forming of Continuous Fiber Reinforced Thermoplastics In: Applied Composite Materials (2020 )ISSN: 0929-189X DOI: 10.1007/s10443-020-09794-7
Mattner T. , Wrensch M. , Drummer D. :Shear behavior of woven and non-crimp fabric based thermoplastic composites at near-processing conditions In: Composites Part B-Engineering 185 (2020 ), Art.Nr.: 107761 ISSN: 1359-8368 DOI: 10.1016/j.compositesb.2020.107761
Müller A. , Schubert D. , Drummer D. , Hausotte T. :Determination of the single point uncertainty of customized polymer gear wheels using structured-light scanning with various polygonization settings In: Journal of Sensors and Sensor Systems 9 (2020 ), S. 51-60 ISSN: 2194-8771 DOI: 10.5194/jsss-9-51-2020
Obst P. , Riedelbauch J. , Oehlmann P. , Rietzel D. , Launhardt M. , Schmölzer S. , Osswald TA. , Witt G. :Investigation of the influence of exposure time on the dual-curing reaction of RPU 70 during the DLS process and the resulting mechanical part properties In: Additive Manufacturing 32 (2020 ), Art.Nr.: 101002 ISSN: 2214-7810 DOI: 10.1016/j.addma.2019.101002
Ott C. , Wolf M. , Drummer D. :Media-Tight Polymer-Polymer Assemblies By Means of Sintered Powder Layer in Assembly Injection Moulding In: Procedia Manufacturing 47 (2020 ), S. 362-367 ISSN: 2351-9789 DOI: 10.1016/j.promfg.2020.04.286
Qiang J. , Luo K. , Dong Y. , Jiang B. , Drummer D. , Roth B. :In Situ Stress Measurement of Ni Electrodeposition Using Lateral Shearing Interferometry In: Journal of The Electrochemical Society 167 (2020 )ISSN: 0013-4651 DOI: 10.1149/1945-7111/abcb78
Roth B. , Drummer D. :Anwendungsoptimierte Druckverfestigung In: Zeitschrift Kunststofftechnik 2020 (2020 ), S. 108-132 ISSN: 1864-2217 DOI: 10.3139/O999.01042020
Roth B. , Drummer D. :Application optimized compression induced solidification In: International Journal of Plastics Technology 16 (2020 )ISSN: 0972-656X
Roth B. , Wildner W. , Drummer D. :Compression-Induced Solidification In: Polymers 12 (2020 ), Art.Nr.: 488 ISSN: 2073-4360 DOI: 10.3390/polym12020488
Roth B. , Wildner W. , Drummer D. :Dynamic compression induced solidification In: Polymers 12 (2020 ), Art.Nr.: 488 ISSN: 2073-4360 DOI: 10.3390/polym12020488
Rösel U. , Drummer D. :Einfluss von Prozessparametern auf die Eigenschaften von Rotoren Fachtagung Leitfähige Kunststoffe des Kunststoffinstituts Lüdenscheid
Schneider K. , Wudy K. , Drummer D. :Flame-retardant polyamide powder for laser sintering: Powder characterization, processing behavior and component properties In: Polymers 12 (2020 ), Art.Nr.: 1697 ISSN: 2073-4360 DOI: 10.3390/POLYM12081697
Schubert D. , Rohrmoser A. , Hagenah H. , Merklein M. , Drummer D. :Verschleißmodellierung am Beispiel einer Polyamid-Stahl-Getriebepaarung für das prozessorientierte Toleranzmanagement Summer School Toleranzmanagement (Erlangen , 28. September 2020 - 28. September 2020 )In: Sandro Wartzack (Hrsg.): Beiträge zur 4. Summer School 2020
Soldner D. , Greiner S. , Burkhardt C. , Drummer D. , Steinmann P. , Mergheim J. :Numerical and experimental investigation of the isothermal assumption in selective laser sintering of PA12 In: Additive Manufacturing (2020 )ISSN: 2214-7810 DOI: 10.1016/j.addma.2020.101676
Thielen N. , Werner D. , Schmidt K. , Seidel R. , Reinhardt A. , Franke J. :A Machine Learning Based Approach to Detect False Calls in SMT Manufacturing 43rd International Spring Seminar on Electronics Technology, ISSE 2020 (Demanovska Valley , 14. Mai 2020 - 15. Mai 2020 )In: Proceedings of the International Spring Seminar on Electronics Technology 2020 DOI: 10.1109/ISSE49702.2020.9121044
Tomiak F. , Schartel B. , Wolf M. , Drummer D. :Particle Size Related Effects of Multi-Component Flame-Retardant Systems in Poly(Butadiene Terephtalate) In: Polymers 12 (2020 )ISSN: 2073-4360 DOI: 10.3390/polym12061315
Topic N. , Kruppa S. , Drummer D. :Assistance Machine Function for BMC Injection Molding International Symposium on Plastics Technology (Aachen )In: ADVANCES IN POLYMER PROCESSING 2020 , BERLIN : 2020 DOI: 10.1007/978-3-662-60809-8_15
Völkl H. , Steck P. , Franz M. , Wartzack S. :Kraftflussgerechte Fused Layer Modeling-Strukturen mit kurzfaserverstärktem Filament In: Konstruktion (2020 ), S. 76-82 ISSN: 0720-5953
Wang L. , Wu W. , Drummer D. :Construction of micro-thermal conductive network of self-assembled CNTs hybrids with 1D–0D structure In: Journal of Thermal Analysis and Calorimetry (2020 )ISSN: 1388-6150 DOI: 10.1007/s10973-020-10291-z
Wang Y. , Wu W. , Drummer D. , Liu C. , Shen W. , Tomiak F. , Schneider K. , Liu X. , Chen Q. :Highly thermally conductive polybenzoxazine composites based on boron nitride flakes deposited with copper particles In: Materials & Design 191 (2020 ), Art.Nr.: 108698 ISSN: 0264-1275 DOI: 10.1016/j.matdes.2020.108698
Wang Y. , Wu W. , Drummer D. , Liu C. , Tomiak F. , Schneider K. :Improvement of thermal conductivity and mechanical properties for polybenzoxazine composites via incorporation of epoxy resin and segregated structure In: Materials Research Express 7 (2020 )ISSN: 2053-1591 DOI: 10.1088/2053-1591/abb263
Wang Y. , Wu W. , Drummer D. , Liu C. , Tomiak F. , Schneider K. , Huang Z. :Achieving a 3D thermally conductive while electrically insulating network in polybenzoxazine with a novel hybrid filler composed of boron nitride and carbon nanotubes In: Polymers 12 (2020 ), S. 1-18 ISSN: 2073-4360 DOI: 10.3390/polym12102331
Werner J. , Vetter L. , Hertle S. , Wolf M. , Drummer D. :Air inclusions in the polymer melt functioning as intrinsic physical blowing agents for the generation of foams in rotational molding In: Cellular Polymers (2020 )ISSN: 0262-4893 DOI: 10.1177/0262489320920070
Wittmann LM. , Kurth K. , Drummer D. :Elongation behaviour of filled semi-crystalline polymers in thermoforming In: Advances in Materials and Processing Technologies 6 (2020 ), S. 647-660 ISSN: 2374-068X DOI: 10.1080/2374068X.2020.1734348
Wolf M. , Drummer D. :Influence of the Structuring-Tool Geometry on Form-Fit Joining by Use of Pin-Like Structures in Vibration Welding In: Procedia Manufacturing 47 (2020 ), S. 375-382 ISSN: 2351-9789 DOI: 10.1016/j.promfg.2020.04.292
Wolf M. , Drummer D. :Joining laser-sintered with injection-molded parts made of PA12 using infrared welding In: Polymer Engineering and Science (2020 )ISSN: 0032-3888 DOI: 10.1002/pen.25596
Wolf M. , Werner J. , Drummer D. :Weld seam morphology and bond strength of infrared and vibration welded SLS parts of polyamide 12 as a function of the layer build-up direction and the welding process In: Additive Manufacturing 36 (2020 ), Art.Nr.: 101451 ISSN: 2214-7810 DOI: 10.1016/j.addma.2020.101451
Wudy K. , Drummer D. :Curing behavior of thermosets for the use in a combined selective laser sintering process of polymers 29th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2018 (Austin, TX , 13. August 2018 - 15. August 2018 )In: Solid Freeform Fabrication 2018: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2018 2020
Wölfel B. , Seefried A. , Allen V. , Kaschta J. , Holmes C. , Schubert DW. :Recycling and Reprocessing of Thermoplastic Polyurethane Materials towards Nonwoven Processing In: Polymers (2020 )ISSN: 2073-4360 DOI: 10.3390/polym12091917 URL: https://www.mdpi.com/2073-4360/12/9/1917
Zhou M. , Fu L. , Jiang F. , Jiang B. , Drummer D. :Atomistic investigation on the wetting behavior and interfacial joining of polymer-metal interface In: Polymers 12 (2020 ), Art.Nr.: 1696 ISSN: 2073-4360 DOI: 10.3390/POLYM12081696
Zou Z. , Wu W. , Wang Y. , Drummer D. :Biomass derived carbon aerogel as an ultrastable skeleton of form-stable phase change materials for efficient thermal energy storage In: Materials Research Express 7 (2020 )ISSN: 2053-1591 DOI: 10.1088/2053-1591/ab8584
Zou Z. , Wu W. , Wang Y. , Kern W. , Drummer D. :Influences of Morphology Controllable Alumina on the Thermal Conductivity of Composites of Silicone Rubber 形貌可控氧化铝对硅橡胶复合材料导热性能的影响 In: Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering 36 (2020 ), S. 128-134 and 141 ISSN: 1000-7555 DOI: 10.16865/j.cnki.1000-7555.2020.0082
2019
Dechet M. , Goblirsch A. , Romeis S. , Zhao M. , Lanyi F. , Kaschta J. , Schubert DW. , Drummer D. , Peukert W. , Schmidt J. :Production of polyamide 11 microparticles for Additive Manufacturing by liquid-liquid phase separation and precipitation In: Chemical Engineering Science 197 (2019 ), S. 11-25 ISSN: 0009-2509 DOI: 10.1016/j.ces.2018.11.051
Dechet M. , Lanzl L. , Werner Y. , Drummer D. , Bück A. , Peukert W. , Schmidt J. :Manufacturing and Application of PA11-Glass Fiber Composite Particles for Selective Laser Sintering 30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX )In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019 URL: http://utw10945.utweb.utexas.edu/sites/default/files/2019/089 Manufacturing and Application of PA11-Glass Fiber.pdf
Dechet M. , Lanzl L. , Wilden A. , Sattes MM. , Drummer D. , Peukert W. , Schmidt J. :Manufacturing of nanoparticle-filled PA11 composite particles for selective laser sintering 30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX )In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019 Open Access: http://utw10945.utweb.utexas.edu/sites/default/files/2019/090 Manufacturing of Nanoparticle-Filled PA11 Composit.pdf
Deringer T. , Drummer D. :Reduction of overmolding of Thermoset In-Mould produced hybrid components SPE Antec (Detroit , 18. März 2019 - 20. März 2019 )In: Proceedings of SPE ANTEC 2019 2019
Deringer T. , Kleffel T. , Drummer D. :Integrative manufacturing of thermoset injection molding components with continous fiber-reinforcement In: Zeitschrift Kunststofftechnik 15 (2019 ), S. 169-187 ISSN: 1864-2217 DOI: 10.3139/O999.03022019
Drummer D. , Greiner S. , Zhao M. , Wudy K. :A novel approach for understanding laser sintering of polymers In: Additive Manufacturing 27 (2019 ), S. 379-388 ISSN: 2214-7810 DOI: 10.1016/j.addma.2019.03.012
Fischer A. , Zhong Y. , Zhang L. , Wu W. , Drummer D. :Heat propagation in thermally conductive polymers of PA6 and hexagonal boron nitride In: Fire and Materials (2019 )ISSN: 0308-0501 DOI: 10.1002/fam.2753
Gierl B. , Drummer D. :Investigation of radiation crosslinking as performance enhancement for thermoplastic spur gears VDI Gears 2019 (München , 18. September 2019 - 18. September 2019 )In: VDI-Berichte 2019 2019
Gierl B. , Hertle S. , Kleffel T. , Drummer D. :Micrometer accurate measurement of tooth wear In: Kunststoffe International 109 (2019 ), S. 107-109 ISSN: 1862-4243
Gierl B. , Schubert D. , Wörz A. , Drummer D. (Hrsg.):Kunststoffe in tribologischen Systemen - Forschung an der FAU Erlangen-Nürnberg 2019 (WAK Jahresmagazin 2019)
Greiner S. , Lanzl L. , Wudy K. , Drummer D. :A new approach for getting more homegeneous temperature fields in selective laser sintering of polymers PPS (Polymer Processing Society) (Dresden , 26. Juni 2017 - 29. Juni 2017 )In: AIP Conference Proceedings 2055 2019
Greiner S. , Wudy K. , Wörz A. , Drummer D. :Thermographic investigation of laser-induced temperature fields in selective
laser beam melting of polymers In: Optics and Laser Technology 109 (2019 ), S. 569-576 ISSN: 0030-3992 DOI: 10.1016/j.optlastec.2018.08.010
Haug M. , Meyer C. , Reischl B. , Prölß G. , Vetter K. , Iberl J. , Nübler S. , Schürmann S. , Rupitsch S. , Heckel M. , Pöschel T. , Winter L. , Herrmann H. , Clemen CS. , Schröder R. , Friedrich O. :The MyoRobot technology discloses a premature biomechanical decay of skeletal muscle fiber bundles derived from R349P desminopathy mice In: Scientific Reports 9 (2019 ), Art.Nr.: 10769 ISSN: 2045-2322 DOI: 10.1038/s41598-019-46723-6
Hertle S. , Wörz A. , Drummer D. :Analyse der Temperaturführung in der roboterbasierten Materialextrusion mit Polypropylen 16th Rapid.Tech (Erfurt , 25. Juni 2019 - 27. Juni 2019 )In: Proceedings of the 16th Rapid.Tech Conference 2019
Jaksch A. , Wudy K. , Drummer D. :Interaktion der Ausgangspulverkennwerte und der Belichtungsparameter im selektiven Laserstrahlschmelzen von Kunststoffen auf resultierende Bauteileigenschaften 16th Rapid.Tech (Erfurt , 25. Juni 2019 - 27. Juni 2019 )
Jiang B. , Zhu L. , Min L. , Li X. , Zhai Z. , Drummer D. :Characterization of microchannel replicability of injection molded electrophoresis microfluidic chips In: Polymers 11 (2019 ), Art.Nr.: 608 ISSN: 2073-4360 DOI: 10.3390/polym11040608
Kleffel T. , Frey P. , Merklein M. , Drummer D. :Analysis of the formation of gap-based leakages in polymer-metal electronic systems with labyrinth seals In: Journal of Polymer Engineering (2019 )ISSN: 0334-6447 DOI: 10.1515/polyeng-2019-0098
Kraus M. , Frey P. , Kleffel T. , Drummer D. , Merklein M. :Mechanical joining without auxiliary element by cold formed pins for multi-material-systems 22nd International ESAFORM Conference on Material Forming (ESAFORM 2019) (Vitoria-Gasteiz , 8. Mai 2019 - 8. Mai 2019 ) DOI: 10.1063/1.5112570
Kurth K. , Drummer D. :Improvement of the Reproduction Accuracy of a Defined Pole Length of Injection Molded Encoder Wheels Europe/Africa Regional Dresden Conference of the Polymer-Processing-Society (PPS) (Dresden , 27. Juni 2017 - 29. Juni 2017 )In: PROCEEDINGS OF THE EUROPE/AFRICA CONFERENCE DRESDEN 2017 - POLYMER PROCESSING SOCIETY PPS , MELVILLE : 2019 DOI: 10.1063/1.5084874
Lanyi F. , Wenzke N. , Kaschta J. , Schubert DW. :On the Determination of the Enthalpy of Fusion of α-Crystalline Isotactic Polypropylene Using Differential Scanning Calorimetry, X-Ray Diffraction, and Fourier-Transform Infrared Spectroscopy: An Old Story Revisited In: Advanced Engineering Materials (2019 ), Art.Nr.: 1900796 ISSN: 1438-1656 DOI: 10.1002/adem.201900796 URL: https://onlinelibrary.wiley.com/doi/full/10.1002/adem.201900796
Lanzl L. , Drummer D. :Gefüllte Systeme für die Additive Fertigung: Erhöhung der Reproduzierbarkeit durch innovative Mischstrategien 7. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg , 12. Dezember 2019 - 12. Dezember 2019 )In: Vom Pulver zum multifunktionalen Bauteil 2019
Lanzl L. , Wudy K. , Greiner S. , Drummer D. :Selective laser sintering of copper filled polyamide 12: powder properties and process behavior In: Polymer Composites 40 (2019 ), S. 1801-1809 ISSN: 0272-8397 DOI: 10.1002/pc.24940
Launhardt M. , Drummer D. :Determination of the fundamental dimension development in building direction for laser-sintered parts In: Journal of Polymer Engineering 39 (2019 )ISSN: 0334-6447 DOI: 10.1515/polyeng-2018-0204
Launhardt M. , Ebel N. , Kondruweit M. , Weyand M. , Volk T. , Drummer D. :Developing a patient individualized flexible silicone implant using SLS and vacuum die casting In: AIP Conference Proceedings 2055 (2019 ), Art.Nr.: 140005 ISSN: 0094-243X DOI: 10.1063/1.5084908
Launhardt M. , Ebel N. , Kondruweit M. , Weyane M. , Volk T. , Drummer D. :Developing a Patient Individualized Flexible Silicone Implant using SLS and Vacuum Die Casting Europe/Africa Regional Dresden Conference of the Polymer-Processing-Society (PPS) (Dresden , 27. Juni 2017 - 29. Juni 2017 )In: PROCEEDINGS OF THE EUROPE/AFRICA CONFERENCE DRESDEN 2017 - POLYMER PROCESSING SOCIETY PPS , MELVILLE : 2019 DOI: 10.1063/1.5084908
Mattner T. , Drummer D. :A new approach for assessing the deflection and bending properties of continuous fiber reinforced thermoplastics under processing conditions In: Polymer Testing 74 (2019 ), S. 77-85 ISSN: 0142-9418 DOI: 10.1016/j.polymertesting.2018.12.024
Müller A. , Metzner S. , Hausotte T. , Schubert D. , Drummer D. :Separation of locally determined work piece deviations and measurement uncertainties for structured-light scanning of customized polymer gear wheels 20. GMA/ITG-Fachtagung Sensoren und Messsysteme 2019 (Nürnberg , 25. Juni 2019 - 26. Juni 2019 )In: AMA Service GmbH (Hrsg.): 20. GMA/ITG-Fachtagung Sensoren und Messsysteme 2019 2019 DOI: 10.5162/sensoren2019/6.4.1 URL: https://www.ama-science.org/proceedings/details/3467
Ott C. , Wolf M. , Kleffel T. , Drummer D. :Haftungsinkompatible Kunststoff-Kunststoff-Verbunde mit gesteigerter Mediendichtheit mittels aufgesinterter Mikrostrukturen In: Zeitschrift Kunststofftechnik 15 (2019 ), S. 314-334 ISSN: 1864-2217
Riedle H. , Braunias K. , Mukai B. , Franke J. :Experimental Mechanical Examination of Artificial 3D Printed and Post Processed Vascular Silicone Models * In: 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) 2019 DOI: 10.1109/EMBC.2019.8856888
Rohrmoser A. , Kiener C. , Schubert D. , Hagenah H. , Drummer D. , Merklein M. :Targeted influencing of the mission-relevant component properties of cold-forged gearwheels In: Konstruktion 2019 (2019 ), S. 94-98 ISSN: 0720-5953
Rohrmoser A. , Kiener C. , Schubert DW. , Hagenah H. , Drummer D. , Merklein M. :Gezielte Beeinflussung der einsatzrelevanten Bauteileigenschaften kaltfließgepresster Zahnräder In: Konstruktion (2019 ), S. 94-98 ISSN: 0720-5953
Roth B. , Wildner W. , Drummer D. :Analysis of the processing-pressure dependent refractive index of polycarbonate by transmission measurements of glass-filled specimen In: Polymer Engineering and Science (2019 )ISSN: 0032-3888 DOI: 10.1002/pen
Roth B. , Zhou M. , Drummer D. :Influence of the Mold Temperature and Part Thickness on the Replication Quality and Molecular Orientation in Compression Injection Molding of Polystyrene In: International Polymer Processing 34 (2019 ), S. 425-433 ISSN: 0930-777X DOI: 10.3139/217.3802
Schubert D. , Hertle S. , Drummer D. :Einfluss prozessbedingter Gefügestrukturen auf die Zahnfußtragfähigkeit von POM-Stirnrädern In: Konstruktion 03/19 (2019 ), S. 75-81 ISSN: 0720-5953
Schubert D. , Hertle S. , Drummer D. :Einfluss prozessbedingter Gefügestrukturen auf die Zahnfußtragfähigkeit von POM-Stirnrädern In: Konstruktion 2019 (2019 ), S. 75-81 ISSN: 0720-5953 DOI: 10.37544/0720-5953-2019-03-75
Schubert D. , Hertle S. , Drummer D. :Influence of titanium oxide-based colourants on the morphological and tribomechanical properties of injection-moulded polyoxymethylene spur gears In: Journal of Polymer Engineering (2019 )ISSN: 0334-6447 DOI: 10.1515/polyeng-2019-0170
Schubert D. , Hertle S. , Kleffel T. , Drummer D. :Development Of An Integrated Simulation Method For The Prediction Of Transmission Errors Of Injection Molded Spur Gears 22nd International Conference on Material Forming (ESAFORM 2019) (Vittoria-Gasteiz , 8. Mai 2019 - 8. Mai 2019 )
Schubert D. , Hertle S. , Kleffel T. , Drummer D. :Development of a simulation method for the prediction of transmission errors of injection molded spur gears 22nd International ESAFORM Conference on Material Forming, ESAFORM 2019 (Vitoria-Gasteiz , 8. Mai 2019 - 10. Mai 2019 )In: Pedro Arrazola, Eneko Saenz de Argandona, Nagore Otegi, Joseba Mendiguren, Mikel Saez de Buruaga, Aitor Madariaga, Lander Galdos (Hrsg.): AIP Conference Proceedings 2019 DOI: 10.1063/1.5112663
Schubert D. , Rohrmoser A. , Hagenah H. , Merklein M. , Drummer D. :Einfluss der fertigungsbedingten Gestalt und Struktur auf das Einlaufverhalten von Stahl-Kunststoff-Getriebepaarungen Industriekolloquium der Forschergruppe FOR 2271 (Erlangen )In: Industriekolloquium der Forschergruppe FOR 2271 2019
Schubert D. , Rohrmoser A. , Hertle S. , Wartzack S. , Hagenah H. , Merklein M. , Drummer D. :New Approach on the Allocation of Wear Allowances - a Case Study 22nd International Conference on Engineering Design (ICED19) (Delft , 5. August 2019 - 8. August 2019 ) DOI: 10.1017/dsi.2019.358
Schubert D. , Rohrmoser A. , Merklein M. , Drummer D. :Effect of Surface Structure on Run-in Wear in Steel-Polyamide Gear Sets In: Zeitschrift Kunststofftechnik 15 (2019 ), S. 370-391 ISSN: 1864-2217 DOI: 10.3139/O999.03052019
Ullmer A. , Kleffel T. , Zhai Z. , Mattner T. , Drummer D. :A Practical Approach for Validation of Aptitude of Sized Carbon Fibers for the In-Mould -Impregnation Process In: American Journal of Mechanical and Materials Engineering 3 (2019 ), S. 11-19 ISSN: 2639-9628 DOI: 10.11648/j.ajmme.20190301.12
Vetter L. , Werner J. , Wolf M. , Hertle S. , Drummer D. :Influence of Vacuum on the Porosity and Mechanical Properties in Rotational Molding In: Polymer Engineering and Science (2019 )ISSN: 0032-3888 DOI: 10.1002/pen.25152
Wang L. , Wu W. , Drummer D. , Ma R. , Liu Z. , Shen W. :Study on thermal conductive PA6 composites with 3-dimensional structured boron nitride hybrids In: Journal of Applied Polymer Science 136 (2019 )ISSN: 0021-8995 DOI: 10.1002/app.47630
Wang L. , Wu W. , Zou Z. , Liu J. , Fischer A. , Drummer D. :Effects of CNTs/BN Hybrids on the Thermal Conductivity of PA6 Composite and Its Mechanism 碳纳米管/氮化硼混杂填料对尼龙6导热性能的影响及其机理 In: Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering 35 (2019 ), S. 42-47 ISSN: 1000-7555 DOI: 10.16865/j.cnki.1000-7555.2019.0069
Wittmann LM. , Fischer D. , Drummer D. :Radiation Crosslinking of Films - New Applications in the Thermoforming of Filled Materials In: Kunststoffe International 10/2019 (2019 ), S. 112-116 ISSN: 1862-4243
Wittmann LM. , Fischer D. , Drummer D. :Strahlenvernetzung von Folien - Neue Anwendungen bei der Verarbeitung gefüllter Materialien im Thermoformprozess In: Kunststoffe 10/2019 (2019 ), S. 176-179 ISSN: 0023-5563
Wittmann LM. , Wolf M. , Drummer D. :Influence of an Increased Fiber Filler Content on the Elongational Behaviour of Filled Films in the Thermoforming Process In: American Journal of Mechanical and Materials Engineering 3 (2019 ), S. 25-35 ISSN: 2639-9628 DOI: 10.11648/j.ajmme.20190302.11
Wittmann LM. , Wolf M. , Kurth K. , Drummer D. :Influence of radiation-crosslinking on the elongation behaviour of glass-fibre-filled sheets in the thermoforming process In: Journal of Polymer Engineering (2019 )ISSN: 0334-6447
Wolf M. , Hertle S. , Drummer D. :Influence of the thermomechanical properties on the joining of adhesion incompatible polymers by form-fit using the vibration welding process In: eXPRESS Polymer Letters 13 (2019 ), S. 365-378 ISSN: 1788-618X
Wudy K. , Budde T. :Reaction kinetics and curing behavior of epoxies for use in a combined selective laser beam melting process of polymers In: Journal of Applied Polymer Science 136 (2019 ), Art.Nr.: 46850 ISSN: 0021-8995 DOI: 10.1002/app.46850
Wudy K. , Drummer D. :Aging effects of polyamide 12 in selective laser sintering: Molecular weight distribution and thermal properties In: Additive Manufacturing 25 (2019 )ISSN: 2214-7810 DOI: 10.1016/j.addma.2018.11.007
Wudy K. , Schmidt J. , Lanzl L. , Zhao M. , Jaksch A. , Dechet M. , Hesse N. , Drummer D. , Peukert W. :Kunststoffpulver für die Additive Fertigung: Vorhersage des Prozessverhaltens mittels prozessangepasster Analyse / Plastic powder for Additive Manufacturing: Prediction of process behavior based on process adapted characterization 7. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg , 12. Dezember 2019 - 12. Dezember 2019 )In: Dietmar Drummer (Hrsg.): Vom Pulver zum multifunktionalen Bauteil 2019
Wörz A. , Drummer D. :Untersuchung zur Bedeutung der Schichtanzahl für Struktur und Eigenschaften von LS-Kunststoffbauteilen Technomer 2019 (Chemnitz , 7. November 2019 - 8. November 2019 )
Wörz A. , Hertle S. , Drummer D. :Mechanisches Verhalten lasergesinterter PA12 Bauteile bei variierenden statischen Belastungsgeschwindigkeiten und -dauern 16th Rapid.Tech (Erfurt , 25. Juni 2019 - 27. Juni 2019 )In: Proceedings of the 16th Rapid.Tech Conference 2019
Wörz A. , Wiedau L. , Wudy K. , Wegner A. , Witt G. , Drummer D. :Influence of chemical postprocessing on mechanical properties of laser-sintered polyamide 12 parts In: Journal of Polymer Engineering (2019 )ISSN: 0334-6447 DOI: 10.1515/polyeng-2019-0110
Wörz A. , Wudy K. , Drummer D. :Understanding the influence of energy-density on the layer-dependent part properties in laser-sintering of PA12 30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, Texas )In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
Wörz A. , Wudy K. , Drummer D. , Heidebrecht M. , Klein S. :Processing LDS-Circuit Boards by Selective Laser Sintering In: International Polymer Processing 34 (2019 ), S. 248-254 ISSN: 0930-777X
Yi W. , Wu W. , Drummer D. , Shen W. , Chao L. , Ning W. :Synergistic construction of thermally conductive network in polybenzoxazine with boron nitride hybrid fillers In: Materials Research Express 6 (2019 )ISSN: 2053-1591 DOI: 10.1088/2053-1591/ab6e7d
Zhang M. , Jiang B. , Chen C. , Drummer D. , Zhai Z. :The effect of temperature and strain rate on the interfacial behavior of glass fiber reinforced polypropylene composites: A molecular dynamics study In: Polymers 11 (2019 ), Art.Nr.: 1766 ISSN: 2073-4360 DOI: 10.3390/polym11111766
Zhao Y. , Drummer D. :Influence of filler content and filler size on the curing kinetics of an epoxy resin In: Polymers 11 (2019 ), Art.Nr.: 1797 ISSN: 2073-4360 DOI: 10.3390/polym11111797
Zhao Y. , Mattner T. , Drummer D. :Investigation of the effects of pre-cross-linked thermoset molding compounds on weld line strength in injection molding In: International Journal of Advanced Manufacturing Technology (2019 )ISSN: 0268-3768 DOI: 10.1007/s00170-019-04306-9
Zhou M. , Xiong X. , Drummer D. , Jiang B. :Interfacial interaction and joining property of direct injection-molded polymer-metal hybrid structures: A molecular dynamics simulation study In: Applied Surface Science 478 (2019 ), S. 680-689 ISSN: 0169-4332 DOI: 10.1016/j.apsusc.2019.01.286
Zhou M. , Xiong X. , Drummer D. , Jiang B. :Molecular Dynamics Simulation on the Effect of Bonding Pressure on Thermal Bonding of Polymer Microfluidic Chip In: Polymers 11 (2019 )ISSN: 2073-4360 DOI: 10.3390/polym11030557
Zhu L. , Min L. , Li X. , Zhai Z. , Drummer D. , Jiang B. :Effects of process conditions on the heat transfer coefficient at the polymer-mold interface and tensile strength of thin-wall injection molding parts In: Journal of Polymer Engineering (2019 )ISSN: 0334-6447 DOI: 10.1515/polyeng-2018-0369
2018
Dechet M. , Gomez Bonilla JS. , Lanzl L. , Drummer D. , Bück A. , Schmidt J. , Peukert W. :Spherical Polybutylene Terephtalate (PBT)-Polycarbonate (PC) Blend Particles by Mechanical Alloying and Thermal Rounding In: Polymers 10 (2018 ), Art.Nr.: 1373 ISSN: 2073-4360 DOI: 10.3390/polym10121373
Dechet M. , Zhao M. , Drummer D. , Peukert W. , Schmidt J. :Herstellung und Charakterisierung von Pulvern für das selektive Laserstrahlschmelzen von Kunststoffen aus Flüssigphasenprozessen am Beispiel von PA11 6. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung (Nürnberg , 12. Dezember 2019 - 12. Dezember 2019 )In: Dietmar Drummer (Hrsg.): 6. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung , Erlangen : 2018
Drexler M. , Greiner S. , Lexow M. , Lanzl L. , Wudy K. , Drummer D. :Selective laser melting of polymers: Influence of powder coating on mechanical part properties In: Journal of Polymer Engineering 38 (2018 ), S. 667-674 ISSN: 0334-6447 DOI: 10.1515/polyeng-2017-0133
Drummer D. , Wudy K. :Additive Fertigung mit Kunststoffen: Potenziale, Entwicklungen und Trends In: Spritzgießen 2018 , VDI Verlag GMBH , 2018 , S. 53-64 (VDI Berichte)
Fischer A. , Kuhn T. , Drummer D. , Franke J. :Effect of talc on the metal adhesion of laser-structured polymer parts 13th International Congress Molded Interconnect Devices (Würzburg , 26. September 2018 - 26. September 2018 )
Fischer C. , Jungmeier A. , Peters G. , Drummer D. :Influence of a locally variable mold temperature on injection molded thin-wall components In: Journal of Polymer Engineering 38 (2018 ), S. 475-481 ISSN: 0334-6447
Greiner S. , Lanzl L. , Zhao M. , Wudy K. , Drummer D. :Influence of powder bed surface on part properties produced by selective laser beam melting of polymers 7th International Conference on Additive Technologies - iCAT 2018 (Maribor , 10. Oktober 2018 - 11. Oktober 2018 )In: Proceedings of the 7th International Conference on Additive Technologies - iCAT2018 2018
Greiner S. , Soldner D. , Jaksch A. , Zhao M. , Mergheim J. , Steinmann P. , Wudy K. , Drummer D. :Experimentelle und simulative Untersuchung der zeit- und ortsaufgelösten Temperaturfelder beim selektiven Strahlschmelzen von Kunststoffen 6. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg , 13. Dezember 2018 - 13. Dezember 2018 )
Heinle M. , Frey P. , Merklein M. , Drummer D. :Einfluss mikrogeformter Kanten an Metalleinlegern auf die Temperaturwechselbeständigkeit mediendichter Kunststoff-Metall-Hybriden In: Zeitschrift Kunststofftechnik 14 (2018 ), S. 211-232 ISSN: 1864-2217 DOI: 10.3139/o999.03032018
Hertle S. , Lass A. , Wurm FH. , Drummer D. :Integrative simulation method for the prediction of anisotropic and time-dependent mechanical behavior of injection molded fiber-reinforced fan impellers - creep modelling fan 2018 (Darmstadt , 18. April 2018 - 20. April 2018 )
Hertle S. , Mattner T. , Drummer D. :Berücksichtigung des Druckniveaus bei der Viskositätsermittlung im Hochdruckkapillarrheometer 9. CONNECT! European Moldflow User Meeting 2018 (Frankfurt , 5. Juni 2018 - 6. Juni 2018 )
Jaksch A. , Hesse N. , Drummer D. , Schmidt J. :Selektives Laserstrahlschmelzen von Kunststoffen: Lokale Bauteileigenschaften in Abhängigkeit unterschiedlicher Alterungszustände des Ausgangspulvers 6. Industriekolloquium des SFB 814 (Nürnberg , 13. Dezember 2018 - 13. Dezember 2018 )In: 6. Industriekolloquium des SFB 814, 2018
Jiang L. , Jiang B. , Wu W. , Zhu L. , Drummer D. :Research on thermal contact resistance between polymer and mold during thin-wall injection molding 薄壁注射成型中聚合物与模具间接触热阻研究 In: Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology) 49 (2018 ), S. 1381-1386 ISSN: 1672-7207 DOI: 10.11817/j.issn.1672-7207.2018.06.010
Kleffel T. , Drummer D. :Electrochemical treatment of metal inserts for subsequent assembly injection molding of tight electronic systems In: Journal of Polymer Engineering (2018 )ISSN: 0334-6447 DOI: 10.1515/polyeng-2017-0432
Kleffel T. , Drummer D. :One-step Electrochemical Treatment of Metal Inserts for Tight Polymer-Metal Hybrid Applications SPE Antec 2018 (Orlando )
Lanzl L. , Greiner S. , Wudy K. , Drummer D. :Glass-Filled Polypropylene-Systems for Enhancing Reproducibility during Selective Laser Beam Melting and Effect of the Mixing Strategy on Powder Properties 7th International Conference on Additive Technologies - iCAT2018 (Maribor , 10. Oktober 2018 - 11. Oktober 2018 )In: Proceedings of the 7th International Conference on Additive Technologies - iCAT2018 2018
Lass A. , Hertle S. , Drummer D. , Wurm FH. :Integrative simulation method for the prediction of anisotropic and time-dependent mechanical behavior of injection molded fiber-reinforced fan impellers - numerical and experimental approach fan 2018 (Darmstadt , 18. April 2018 - 20. April 2018 )
Lexow M. , Heller B. , Maier F. , Steinrück HP. :Anion Exchange at the Liquid/Solid Interface of Ultrathin Ionic Liquid Films on Ag(111) In: ChemPhysChem 19 (2018 ), S. 2978-2984 ISSN: 1439-4235 DOI: 10.1002/cphc.201800773
Mattner T. , Drummer D. :Usability of dielectric properties for evaluation and research of deconsolidation of endless fiber-reinforced thermoplastics In: Journal of Polymer Engineering 38 (2018 )ISSN: 0334-6447 DOI: 10.1515/polyeng-2017-0395
Mattner T. , Körbel W. , Wrensch M. , Drummer D. :Compensation of edge effects in picture frame testing of continuous fiber reinforced thermoplastics In: Composites Part B-Engineering 142 (2018 ), S. 95-101 ISSN: 1359-8368 DOI: 10.1016/j.compositesb.2018.01.009
Obst P. , Launhardt M. , Drummer D. , Osswald P. , Osswald T. :Failure criterion for PA12 SLS additive manufactured parts In: Additive Manufacturing 21 (2018 ), S. 619-627 ISSN: 2214-7810 DOI: 10.1016/j.addma.2018.04.008
Osmanlic F. , Wudy K. , Laumer T. , Schmidt M. , Drummer D. , Körner C. :Modeling of Laser Beam Absorption in a Polymer Powder Bed In: Polymers 10 (2018 )ISSN: 2073-4360 DOI: 10.3390/polym10070784
Riedle H. , Mukai B. , Molz P. , Franke J. :Determination of the Mechanical Properties of Aortic Tissue for 3D Printed Surgical Models 2018 11th Biomedical Engineering International Conference (BMEiCON) (Chiang Mai , 21. November 2018 - 24. November 2018 )In: BMEiCON - 2018 , [Piscataway, New Jersey] : 2018 DOI: 10.1109/BMEiCON.2018.8609983
Topic N. , Kruppa S. , Drummer D. , Schiffers R. :Stabilization of BMC injection molding by process control measures 2018 Society of Plastics Engineers Annual Technical Conference, ANTEC 2018 (Orlando, FL, USA , 7. Mai 2018 - 10. Mai 2018 )In: Annual Technical Conference - ANTEC, Conference Proceedings 2018
Wang L. , Zhang L. , Fischer A. , Zhong Y. , Drummer D. , Wu W. :Enhanced thermal conductivity and flame retardancy of polyamide 6/flame retardant composites with hexagonal boron nitride In: Journal of Polymer Engineering (2018 )ISSN: 0334-6447 DOI: 10.1515/polyeng-2017-0414
Wildner W. , Drummer D. :Analysis of the processing-pressure dependent refractive index of Poly(methyl methacrylate) by transmission measurements of glass-filled specimen In: Polymer Testing 71 (2018 ), S. 217-222 ISSN: 0142-9418 DOI: 10.1016/j.polymertesting.2018.09.011
Wildner W. , Drummer D. :Light scattering and optical performance of glass-particle filled matrices with similar refractive index In: Journal of Composite Materials 52 (2018 )ISSN: 0021-9983 DOI: 10.1177/0021998318778889
Wildner W. , Drummer D. :Light scattering of glass-particle filled matrices with similar refractive index In: Journal of Composite Materials (2018 )ISSN: 0021-9983 DOI: 10.1177/0021998318778889
Wildner W. , Drummer D. :Nanofiller materials for transparent polymer composites: Influences on the properties and on the transparency—A review In: Journal of Thermoplastic Composite Materials (2018 ), S. 1-19 ISSN: 0892-7057 DOI: 10.1177/0892705718797157
Wittmann LM. , Kleffel T. , Mattner T. , Drummer D. :Influence of Stitching Parameters on the Joint Strength of Welded-Stitched Composites In: International Polymer Processing 33 (2018 ), S. 706-713 ISSN: 0930-777X DOI: 10.3139/217.3518
Wolf M. , Launhardt M. , Drummer D. :Untersuchung zum Vibrationsschweißen von laserstrahlgesinterten Bauteilen In: Joining Plastics - Fügen von Kunststoffen 01 (2018 ), S. 22-28 ISSN: 1864-3450
Wudy K. , Drexler M. , Lanzl L. , Drummer D. :Analysis of time dependent thermal properties for high rates in selective laser sintering In: Rapid Prototyping Journal 24 (2018 ), S. 894-900 ISSN: 1355-2546 DOI: 10.1108/RPJ-01-2017-0013
Wudy K. , Drummer D. :Curing beharior of thermosets for the use in a combined selective laser sintering process 9th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference (Austin , 13. August 2018 - 15. August 2018 )In: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference 2018
Wudy K. , Drummer D. :Infiltration Behavior of Thermosets for Use in a Combined
Selective Laser Sintering Process of Polymers In: JOM Journal of the Minerals, Metals and Materials Society (2018 ), S. 1-8 ISSN: 1047-4838 DOI: 10.1007/s11837-018-3226-0
Wudy K. , Greiner S. , Zhao M. , Drummer D. :Selective laser beam melting of polymers: In situ and offline measurements for process adapted thermal characterization In: Procedia CIRP 74 (2018 ), S. 238-243 ISSN: 2212-8271 DOI: 10.1016/j.procir.2018.08.102
Wörz A. , Drummer D. :Tribological anisotropy of selective laser sintered PA12 parts In: Polymer Testing 70 (2018 ), S. 117-126 ISSN: 0142-9418 DOI: 10.1016/j.polymertesting.2018.06.028
Wörz A. , Drummer D. :Understanding hatch-dependent part properties in SLS International Solid Freeform Fabrication Symposium (Austin , 13. August 2018 - 15. August 2018 )In: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium 2018
Wörz A. , Wudy K. , Drummer D. :Einfluss des Schichtaufbaus auf das mechanische Verhalten von selektiv lasergesinterten Bauteilen Rapid Tech 2018 (Erfurt , 5. Juni 2018 - 7. Juni 2018 )
Zhai Z. , Jiang B. , Drummer D. :Nonlinear material model for quasi-unidirectional woven composite accounting for viscoelastic, viscous deformation, and stiffness reduction In: Polymers 10 (2018 ), Art.Nr.: 903 ISSN: 2073-4360 DOI: 10.3390/polym10080903
Zhai Z. , Jiang By. , Drummer D. :Strain rate-dependent mechanical behavior of quasi-unidirectional E-glass fabric reinforced polypropylene composites under off-axis tensile loading In: Polymer Testing 69 (2018 ), S. 276-285 ISSN: 0142-9418 DOI: 10.1016/j.polymertesting.2018.05.033
Zhai Z. , Jiang By. , Drummer D. :Temperature-dependent response of quasi-unidirectional E-glass fabric reinforced polypropylene composites under off-axis tensile loading In: Composites Part B-Engineering 148 (2018 ), S. 180-187 ISSN: 1359-8368
Zhai Z. , Jiang By. , Drummer D. :Tensile Creep Behavior of Quasi-Unidirectional E-Glass Fabric Reinforced Polypropylene Composite In: Polymers 10 (2018 )ISSN: 2073-4360 DOI: 10.3390/polym10060661
Zhang L. , Wang L. , Fischer A. , Wu W. , Drummer D. :Effect of graphite on the flame retardancy and thermal conductivity of P-N flame retarding PA6 In: Journal of Applied Polymer Science (2018 )ISSN: 0021-8995 DOI: 10.1002/APP.46559
Zhao M. , Greiner S. , Wudy K. , Schmidt J. , Peukert W. , Drummer D. :Pulverschüttungsanalyse für das selektive Laser-Sintern mittels Computertomographie Rapid Tech (Erfurt , 5. Juni 2018 - 7. Juni 2018 )In: Proceedings of the 15th Rapid.Tech Conference 2018
Zhao M. , Wudy K. , Drummer D. :Crystallization Kinetics of Polyamide 12 during Selective Laser Sintering In: Polymers 10 (2018 )ISSN: 2073-4360 DOI: 10.3390/polym10020168
Zhao Y. , Zhai Z. , Drummer D. :Thermal conductivity of aluminosilicate- and aluminum oxide-filled thermosets for injection molding: Effect of filler content, filler size and filler geometry In: Polymers 10 (2018 ), Art.Nr.: 457 ISSN: 2073-4360 DOI: 10.3390/polym10040457
Zhou M. , Xiong X. , Drummer D. , Jiang B. :Molecular dynamics simulation and experimental investigation of the geometrical morphology development of injection-molded nanopillars on polymethylmethacrylate surface In: Computational Materials Science 149 (2018 ), S. 208-216 ISSN: 0927-0256 DOI: 10.1016/j.commatsci.2018.03.035
2017
Braun T. , Greiner S. , Baierl U. , Drummer D. , Franke J. :Additive Metallisierung von im Spritzguss hergestellten Keramiken mittels Plasma-Coating-Technologie In: PLUS - Produktion von Leiterplatten und Systemen 19 (2017 ), S. 985-1144
Braun T. , Greiner S. , Diepgen A. , Schröppel K. , Drummer D. , Franke J. :ADDITIVE METALLIZATION OF INJECTION MOLDED CERAMIC COMPONENTS BY A PLASMA-COATING PROCESS SMTA Pan Pacific Microelectronics Symposium (Kauai, Hawaii , 6. Februar 2017 - 9. Februar 2017 )In: IEEE (Hrsg.): Proceedings of the SMTA Pan Pacific Microelectronics Symposium, 2017 2017
Deringer T. , Gröschel C. , Drummer D. :Influence of mold temperature and process time on the degree of cure of epoxy-based materials for thermoset injection molding and prepreg compression molding In: Journal of Polymer Engineering (2017 )ISSN: 0334-6447 DOI: 10.1515/polyeng-2016-0409
Diermeier S. , Iberl J. , Vetter K. , Haug M. , Pollmann C. , Reischl B. , Buttgereit A. , Schürmann S. , Spörrer M. , Goldmann W. , Fabry B. , Elhamine F. , Stehle R. , Pfitzer G. , Winter L. , Clemen CS. , Herrmann H. , Schröder R. , Friedrich O. :Early signs of architectural and biomechanical failure in isolated myofibers and immortalized myoblasts from desmin-mutant knock-in mice In: Scientific Reports 7 (2017 ), S. 1391 ISSN: 2045-2322 DOI: 10.1038/s41598-017-01485-x
Drummer D. , Fischer A. , Ranft F. , Heinle C. , Amesöder S. , Lober A. :Thermally Conductive Polymers Meet LED In: Kunststoffe International 2017 (2017 ), S. 21-24 ISSN: 1862-4243
Drummer D. , Fischer A. , Ranft F. , Heinle C. , Amesöder S. , Lober A. :Wärmeleitender Kunststoff trifft LED In: Kunststoffe 1 (2017 ), S. 38-41 ISSN: 0023-5563
Fischer A. , Kuhn T. , Müller H. , Drummer D. , Franke J. , Zimmermann A. :Effect of flow lines on the metallization of laser structured polymer parts SPE Antec 2017 (Anaheim , 8. Mai 2017 - 10. Mai 2017 )In: SPE Proceedings Antec 2017
Fischer A. , Meister S. , Drummer D. :Effect of fillers on the metallization of laser-structured polymer parts In: Journal of Polymer Engineering 37 (2017 ), S. 151-161 ISSN: 0334-6447
Fischer C. , Drummer D. :Einfluss der Werkzeugtemperatur auf die lokale Ausbildung der Bauteileigenschaften beim dynamisch temperierten Mikrospritzguss 8. Kolloquium Mikroproduktion (Bremen , 27. November 2017 - 28. November 2017 )In: 8. Kolloquium Mikroproduktion 2017
Fischer C. , Drummer D. :Micro Components with Locally Different Properties Realized by Segmented Tempered Injection Molding SPE Antec (Anaheim , 8. Mai 2017 - 10. Mai 2017 )In: SPE Proceedings Antec , Anaheim : 2017
Fischer C. , Seefried A. , Drummer D. :Crystallization and Component Properties of Polyamide 12 at Processing-Relevant Cooling Conditions In: Polymer Engineering and Science 57 (2017 ), S. 450-457 ISSN: 0032-3888 DOI: 10.1002/pen.24441
Fischer C. , Seefried A. , Merle B. , Göken M. , Drummer D. :Influencing Hardness and Wear During the Dynamic Tempered Microinjection Molding Process by Considering Isothermal Holding Time In: Polymer Engineering and Science 57 (2017 ), S. 121-128 ISSN: 0032-3888 DOI: 10.1002/pen.24394
Goris S. , Back T. , Yanev A. , Brands D. , Drummer D. , Osswald T. :A novel fiber length measurement technique for discontinuous fiber-reinforced composites: A comparative study with existing methods In: Polymer Composites (2017 )ISSN: 1548-0569 DOI: 10.1002/pc.24466
Greiner S. , Kurth K. , Fix C. , Braun T. , Franke J. , Drummer D. :Influence of Material and Processing Parameters on the Surface Roughness of Injection-Molded Ceramic Parts In: Journal of Ceramic Science and Technology 08 (2017 ), S. 227-286 ISSN: 2190-9385 DOI: 10.4416/JCST2017-00009
Greiner S. , Lanzl L. , Wudy K. , Drexler M. , Drummer D. :Untersuchungen zum Potential der Pulververdichtung durch den Pulverauftrag beim selektiven Laserstrahlschmelzen von Kunststoffen Rapid Tech 2017 (Erfurt , 20. Juni 2017 - 22. Juni 2017 )In: Proceedings of Rapid Tech 2017 2017
Greiner S. , Wudy K. , Lanzl L. , Drummer D. :Selective laser sintering of polymer blends: Bulk properties and process behavior In: Polymer Testing 64 (2017 ), S. 136-144 ISSN: 0142-9418 DOI: 10.1016/j.polymertesting.2017.09.039
Gröschel C. , Drummer D. :Forming of thermoplastic matrix composites with gas pressure - the influence of blank holder and sheet temperature on the forming pressure and drawing ratio In: International Polymer Processing 32 (2017 ), S. 194-202 ISSN: 0930-777X DOI: 10.3139/217.3298
Hertle S. , Drummer D. :Einfluss der druckabhängigen Viskosität auf die Spritzgusssimulation kurzfaserverstärkter Thermoplaste Technomer 2017 (Chemnitz , 10. November 2017 - 10. November 2017 )
Hinze M. , Ranft F. , Drummer D. , Schwieger W. :Reduction of the heat capacity in low-temperature adsorption chillers using thermally conductive polymers as heat exchangers material In: Energy Conversion and Management 145 (2017 ), S. 378-385 ISSN: 0196-8904 DOI: 10.1016/j.enconman.2017.05.011
Kleffel T. , Drummer D. :Investigating the suitability of roughness parameters to assess the bond strength of polymer-metal hybrid structures with mechanical adhesion In: Composites Part B-Engineering 117 (2017 ), S. 20-25 ISSN: 1359-8368 DOI: 10.1016/j.compositesb.2017.02.042
Kleffel T. , Drummer D. , Kuhmann K. :Adhesion promoter for unequal pairs In: Kunststoffe International 107 (2017 ), S. 80-83 ISSN: 1862-4243
Kleffel T. , Drummer D. , Kuhmann K. :Vermittler für ungleiche Paare In: Kunststoffe International (2017 ), S. 199-203 ISSN: 1862-4243
Kreis O. , Drummer D. :Department Maschinenbau - Forschung. Lehre. Transfer / Department of Mechanical Engineering – Research. Education. Transfer (2017 ) URL: https://www.department.mb.tf.fau.de/files/2017/03/MB_Departmentbroschuere_2017.pdf (anderer)
Kurth K. , Drummer D. :Effect of the variation of the gating system on the magnetic properties of injection molded pole-oriented rings In: Journal of Polymer Engineering 37 (2017 ), S. 537-546 ISSN: 0334-6447 DOI: 10.1515/polyeng-2016-0306
Kurth K. , Drummer D. :Variation of the Pole Length in Pole-Oriented Bonded Rings In: Journal of Polymers 2017 (2017 ), S. 11 ISSN: 2356-7570 DOI: 10.1155/2017/8241859
Lanzl L. , Wudy K. , Greiner S. , Drummer D. :Selektives Laserstrahlschmelzen von glasfasergefüllten Polymersystemen 5. Industriekolloquium des SFB 814 (Nürnberg , 12. Dezember 2017 - 12. Dezember 2017 )In: 5. Industriekolloquium des SFB 814 2017
Leisen C. , Wolf M. , Drummer D. :Influence of the Mold Temperature on the Material Properties and the Vibration Welding Process of Cross-Linked Polyamide 66 In: Polymer Engineering and Science (2017 )ISSN: 0032-3888 DOI: 10.1002/pen
Lexow M. , Drexler M. , Drummer D. :Fundamental investigation of part properties at accelerated beam speeds in the selective laser sintering process In: Rapid Prototyping Journal 23 (2017 ), S. 1099-1106 ISSN: 1355-2546 DOI: 10.1108/RPJ-04-2016-0060
Löhner MJ. , Drummer D. :Characterization of layer built-up and inter-layer boundaries in rotational molding of multi-material parts in dependency of the filling strategy In: Journal of Polymer Engineering 37 (2017 ), S. 411-420 ISSN: 0334-6447 DOI: 10.1515/polyeng-2016-0175
Löhner MJ. , Drummer D. :Influence of Particle Size in Multi-layer Rotational Molding with a Multiphase Interlayer to generate Mechanical Adhesion SPE Antec 2017 (Anaheim , 8. Mai 2017 - 10. Mai 2017 )In: SPE Proceedings Antec 2017
Löhner MJ. , Drummer D. :Optimierung der Verbundhaftung von mehrlagigen, rotationsgeformten Bauteilen durch Einbringen einer mehrphasigen Zwischenschicht In: Zeitschrift Kunststofftechnik 13 (2017 ), S. 1-31 ISSN: 1864-2217 DOI: 10.3139/O999.01012017
Löhner MJ. , Drummer D. :Optimization of adhesion in multi-layer rotational molded parts by including a multi-phase interlayer In: Zeitschrift Kunststofftechnik 2017 (2017 ), S. 1-31 ISSN: 1864-2217 DOI: 10.3139/O999.01012017
Meister S. , Fischer C. , Drummer D. :Effects of high cooling rates on solidification for nucleated and non-nucleated semi-crystalline thermoplastics In: Zeitschrift Kunststofftechnik 13 (2017 ), S. 212-232 ISSN: 1864-2217 DOI: 10.3139/O999.01042017
Meister S. , Hertle S. , Drummer D. :Layer-dependent characterization of wear behaviour on variothermal injection moulded micro parts using pin on disc measurements In: Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems 23 (2017 ), S. 2807-2814 ISSN: 0946-7076 DOI: 10.1007/s00542-016-3051-8
Obst P. , Launhardt M. , Drummer D. , Osswald P. , Osswald T. :Failure Criterion for SLS Additive Manufactured Parts SPE Antec (Anaheim , 8. Mai 2017 - 10. Mai 2017 )In: SPE Proceedings Antec 2017
Sarabi B. , Drummer D. :Understanding flame-retardant grades better In: Kunststoffe International 107 (2017 ), S. 84-87 ISSN: 1862-4243
Schiffers R. , Topic N. , Moser S. , Drummer D. :A method for controlling the mold filling volume for BMC injection molding 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017 (Anaheim, CA, USA , 8. Mai 2017 - 10. Mai 2017 )In: Annual Technical Conference - ANTEC, Conference Proceedings 2017
Wildner W. , Drummer D. :The mechanical and optical properties of injection-moulded PMMA, filled with glass particles of a matching refractive index In: Polymers and Polymer Composites 25 (2017 ), S. 453-462 ISSN: 1478-2391
Wolf M. , Kleffel T. , Leisen C. , Drummer D. :Joining of Incompatible Polymer Combinations by Form Fit Using the Vibration Welding Process In: International Journal of Polymer Science 2017 (2017 ), S. 8 ISSN: 1687-9422 DOI: 10.1155/2017/6809469
Wudy K. , Hinze M. , Ranft F. , Drummer D. , Schwieger W. :Selective laser sintering of zeolite filled polypropylene composites: Processing and properties of bulk adsorbents In: Journal of Materials Processing Technology 246 (2017 ), S. 136-143 ISSN: 0924-0136 DOI: 10.1016/j.jmatprotec.2017.03.011
Wörz A. , Wudy K. , Drummer D. , Wegner A. , Witt G. :Comparison of long-term properties of laser sintered and injection molded polyamide 12 parts In: Journal of Polymer Engineering (2017 )ISSN: 0334-6447 DOI: 10.1515/polyeng-2017-0227
Zhai Z. , Gröschel C. , Drummer D. :Investigating the in-plane mechanical behavior of single-ply quasi-unidirectional glass fiber/polypropylene composites In: Journal of Polymer Engineering 37 (2017 ), S. 401-409 ISSN: 0334-6447 DOI: 10.1515/polyeng-2016-0247
Zhai Z. , Jiang By. , Drummer D. :Characterization of nonlinear response in quasi-unidirectional E-glass fabric reinforced polypropylene composites under off-axis tensile loading In: Polymer Testing 63 (2017 ), S. 521-529 ISSN: 0142-9418 DOI: 10.1016/j.polymertesting.2017.09.019
Zhong Y. , Zhang L. , Fischer A. , Wang L. , Drummer D. :The effect of hBN on the flame retardancy and thermal stability of P-N flame retardant PA6 In: Journal of Macromolecular Science Part A-Pure and Applied Chemistry (2017 )ISSN: 1060-1325 DOI: 10.1080/10601325.2017.1387484
2016
Braun T. , Greiner S. , Franke J. , Drummer D. :Additive Plasma Metallization of Spatial Ceramic Injection Molded Components In: 12th International Congress Molded Interconnect Devices , 2016 , S. 62--67
Braun T. , Greiner S. , Franke J. , Drummer D. :Additive Plasma Metallization of Spatial Ceramic Injection Molded Components 12th International Congress Molded Interconnect Devices (Würzburg , 28. September 2016 - 29. September 2016 )In: 12th International Congress Molded Interconnect Devices (MID): Scientific Proceedings 2016 DOI: 10.1109/ICMID.2016.7738930
Drummer D. , Gröschel C. , Zhao Y. :Eliminating weld-seam weakness In: Kunststoffe International 106 (2016 ), S. 52-55 ISSN: 1862-4243
Drummer D. , Jiang By. , Weng C. , Zhou My. :Improvement of thickness deposition uniformity in nickel electroforming for micro mold inserts In: Journal of Central South University 23 (2016 ), S. 2536-2541 ISSN: 2227-5223 DOI: 10.1007/s11771-016-3314-7
Drummer D. , Meister S. , Wildner W. :Affecting processing and properties of injection moulded thin-wall parts using dynamic tempered rapid tooling moulds In: Zeitschrift Kunststofftechnik 2016 (2016 ), S. 1-30 ISSN: 1864-2217
Drummer D. , Meister S. , Wildner W. :Prozess- und Eigenschaftsbeeinflussung dünnwandiger Spritzgießteile mittels dynamisch temperierten Rapid Tooling Spritzgießwerkzeugen In: Zeitschrift Kunststofftechnik 12 (2016 ), S. 1-30 ISSN: 1864-2217
Fischer A. , Drummer D. :Polymer films for laser-structured circuit carriers 12th International Congress on Molded Interconnect Devices, MID 2016 DOI: 10.1109/ICMID.2016.7738919
Fischer A. , Meister S. , Drummer D. :Effect of fillers on the metallization of laserstructured polymer parts In: Journal of Polymer Engineering 37 (2016 )ISSN: 0334-6447 DOI: 10.1515/polyeng-2016-0055
Fischer C. , Drummer D. :Crystallization and Mechanical Properties of Polypropylene under Processing-Relevant Cooling Conditions with respect to Isothermal Holding Time In: International Journal of Polymer Science 2016 (2016 ), S. 11 ISSN: 1687-9422 DOI: 10.1155/2016/5450708
Fischer C. , Meister S. , Drummer D. :Einfluss der Bauteildimensionen auf die Strukturausbildung und die Gebrauchseigenschaften beim Mikrospritzgießen von Polyamid 66 Fachtagung Polyamide 2016 (Würzburg , 20. April 2016 - 20. April 2016 )
Gröschel C. , Drummer D. :Novel process enables more uniform wall thickness in formed composites In: SPE Plastics Research Online (2016 ), S. 2 DOI: 10.2417/spepro.005866
Hertle S. , Drexler M. , Drummer D. :Additive Manufacturing of Poly(propylene) by Means of Melt Extrusion In: Macromolecular Materials and Engineering 301 (2016 ), S. 1482-1493 ISSN: 1439-2054 DOI: 10.1002/mame.201600259
Jungmeier A. , Fischer C. :Untersuchungen zum Mikrothermoformen von Polycarbonat-Folien und zu dessen Integration in den Spritzgießprozess In: Zeitschrift Kunststofftechnik 12 (2016 ), S. 356-381 ISSN: 1864-2217
Kurth K. , Drummer D. :Einflussfaktoren auf die Herstellung kunststoffgebundener multipolarer Magnetringe 5. Ilmenauer Magnettag (Ilmenau , 8. Juni 2016 - 8. Juni 2016 )
Kurth K. , Drummer D. :Influences on the magnetic properties of injection molded multipolar rings In: International Polymer Processing 31 (2016 ), S. 356-363 ISSN: 0930-777X DOI: 10.3139/217.3211
Kurth K. , Drummer D. :Kunststoffgebundene Dauermagnete VDI-Fachkonferenz "Kunststoffe in der Mechatronik & Polytronik" (Düsseldorf , 6. Dezember 2016 - 6. Dezember 2016 )
Kurth K. , Drummer D. :Kunststoffgebundene Dauermagnete - Stand, Anwendung und Perspektiven 2. Fraunhofer Fachtagung "Magnetwerkstoffe und seltene Erden" (Hanau , 30. Juni 2016 - 30. Juni 2016 )
Kurth K. , Grünewald E. , Drummer D. :Influences of the variation of process parameters on the pole length of multipolar bonded magnets 74th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Indianapolis 2016
Lanzl L. , Greiner S. , Wudy K. , Drummer D. :Selective laser sintering of a polypropylene polyamide 12 blend: Bulk and component properties iCAT 2016 (Nürnberg , 29. November 2016 - 30. November 2016 )In: Proceedings of 6th International Conference on Additive Technologies 2016
Lanzl L. , Wudy K. , Drexler M. , Drummer D. :Laser-high-speed-DSC: Process-oriented thermal analysis of PA 12 in selective laser sintering In: Physics Procedia 83 (2016 ), S. 981-990 ISSN: 1875-3892 DOI: 10.1016/j.phpro.2016.08.103
Launhardt M. , Wörz A. , Loderer A. , Laumer T. , Drummer D. , Hausotte T. , Schmidt M. :Detecting surface roughness on SLS parts with various measuring techniques In: Polymer Testing 53 (2016 ), S. 217–226 ISSN: 0142-9418 DOI: 10.1016/j.polymertesting.2016.05.022
Leisen C. , Drummer D. :Infrared welding of cross-linkable polyamide 66 In: eXPRESS Polymer Letters (2016 ), S. 849-859 ISSN: 1788-618X DOI: 10.3144/expresspolymlett.2016.79
Leisen C. , Seefried A. , Drummer D. :Post-crosslinking behavior of radiation crosslinked polyamide 66 during vibration welding In: Polymer Engineering and Science 56 (2016 ), S. 735-742 ISSN: 0032-3888 DOI: 10.1002/pen.24300
Li M. , Zhong Y. , Wang Z. , Fischer A. , Ranft F. , Drummer D. , Wu W. :Flame retarding mechanism of Polyamide 6 with phosphorus-nitrogen flame retardant and DOPO derivatives In: Journal of Applied Polymer Science 133 (2016 ), S. 1-10 ISSN: 0021-8995 DOI: 10.1002/app.42932
Löhner MJ. , Drummer D. :Experimental Studies on the Bonding Strength and Fracture Behavior of Incompatible Materials Bonded by Mechanical Adhesion in Multilayer Rotational Molding In: Journal of Polymers 2016 (2016 ), S. 11 ISSN: 2356-7570 DOI: 10.1155/2016/5768453
Löhner MJ. , Drummer D. :Multi-layer rotational molding of pe-pa utilizing a mulitphase interlayer to generate mechanical adhesion 74th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Indianapolis 2016 (Indianapolis )In: SPE Proceedings ANTEC 2016
Mattner T. , Drummer D. :Influence of pressure on end corrections in capillary rheometry In: Rheologica Acta 55 (2016 ), S. 823-832 ISSN: 0035-4511 DOI: 10.1007/s00397-016-0958-z
Meister S. , Drummer D. :Micro assembly injection moulding with variothermal mould tempering In: Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems 22 (2016 ), S. 1-9 ISSN: 0946-7076 DOI: 10.1007/s00542-016-2820-8
Ruther F. , Singh R. , Zehnder T. , Cicha I. , Boccaccini AR. , Detsch R. :Development of a biofabrication process for the manufacture of vessel like structures Annual Conference of the German Society for Biomaterials 2016 (Aachen , 29. September 2016 - 1. Oktober 2016 )In: BioNanoMaterials (Hrsg.): Band 17 , Berlin/Boston : 2016 DOI: 10.1515/bnm-2016-1001.
Schmidt J. , Gomez Bonilla JS. , Sachs M. , Lanzl L. , Wudy K. , Wirth KE. , Drummer D. , Peukert W. :Production of polybutylene terephtalate glass composite powders and characterization for processing in selective laser sintering 26th Annual International
Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference (Austin , 8. August 2016 - 10. August 2016 )
Schmidt J. , Sachs M. , Fanselow S. , Zhao M. , Romeis S. , Drummer D. , Wirth KE. , Peukert W. :Optimized polybutylene terephthalate powders for selective laser beam melting In: Chemical Engineering Science 156 (2016 ), S. 1-10 ISSN: 0009-2509 DOI: 10.1016/j.ces.2016.09.009
Schmidt J. , Sachs M. , Zhao M. , Fanselow S. , Wudy K. , Drexler M. , Drummer D. , Wirth KE. , Peukert W. :A novel process for production of spherical PBT powders and their processing behavior during laser beam melting 31st International Conference of the Polymer Processing Society, PPS 2015 (Jeju Island Korea , 7. Juni 2015 - 11. Juni 2015 )In: 31st International Conference of the POLYMER PROCESSING SOCIETY 2016 DOI: 10.1063/1.4942343
Seefried A. , Heinle M. , Drummer D. :Mechanical properties of radiation cross linked polyamide 12 after vacuum thermofoming In: Production Engineering 10 (2016 ), S. 119-128 ISSN: 0944-6524
Wildner W. , Drummer D. :A fiber optic temperature sensor based on the combination of epoxy and glass particles with different thermo-optic coefficients In: Photonic Sensors 6 (2016 ), S. 295-302 ISSN: 1674-9251 DOI: 10.1007/s13320-016-0328-6
Wildner W. , Drummer D. :A Fiber Optic Temperature Sensor Based on the Combination of Two Materials with Different Thermo-Optic Coefficients In: IEEE Sensors Journal 16 (2016 ), S. 688 - 692 ISSN: 1530-437X DOI: 10.1109/JSEN.2015.2488979
Wildner W. , Drummer D. :Nano Filler Materials for Transparent Polymer Composites: Influences on the Properties and on the Transparency --- A review In: Polymer Composites (2016 )ISSN: 0272-8397
Wudy K. , Drexler M. , Lanzl L. , Drummer D. :Analysis of time dependent thermal properties for high rates in selective laser sintering iCAT 2016 (Nürnberg , 29. November 2016 - 30. November 2016 )In: Proceedings of 6th International Conference on Additive Technologies 2016
Wudy K. , Drummer D. :Aging Behavior of Polyamide 12 Interrelation between Bulk Characteristics and Part Properties 27th Solid Freeform Fabrication Symposium (Austin, Tx , 8. August 2016 - 10. August 2016 )In: Proceedings of the 27th Annual International Solid Freeform Fabrication Symposium An Additive Manufacturing Conference 2016
Wudy K. , Lanzl L. , Drummer D. :Selective Laser Sintering of Filled Polymer Systems: Bulk and Laser Beam Interaction In: Physics Procedia 83 (2016 ), S. 991-1002 ISSN: 1875-3892 DOI: 10.1016/j.phpro.2016.08.104.
Wudy K. , Lanzl L. , Drummer D. :Selective laser sintering of filled polymer systems: Bulk properties and laser beam material interaction In: Physics Procedia 83 (2016 ), S. 991-1002 ISSN: 1875-3892 DOI: 10.1016/j.phpro.2016.08.104
Zhai Z. , Gröschel C. , Drummer D. :Tensile behavior of quasi-unidirectional glass fiber/polypropylene composites at room and elevated temperatures In: Polymer Testing 54 (2016 ), S. 126-133 ISSN: 0142-9418 DOI: 10.1016/j.polymertesting.2016.07.003
2015
Drexler M. , Drummer D. , Wudy K. :Einfluss des Pulverauftragsprozesses auf den selektiven Strahlschmelzprozess thermoplastischer Kunststoffe RapidTech 2015 (Erfurt , 10. Juni 2015 - 11. Juni 2015 )In: Tagungsband / Digital Proceedings RapidTech 2015 2015
Drexler M. , Drummer D. , Wudy K. :Interaction between Time Dependent Exposure Strategies and Part Positioning within Selective Laser Melting Process of Plastics In: International Journal of Recent Contributions from Engineering, Science & IT 3 (2015 ), S. 13-19 ISSN: 2197-8581 DOI: 10.3991/ijes.v3i1.4286
Drexler M. , Lexow M. , Drummer D. :Selective Laser Melting of Polymer Powder - Part Mechanics as Function of Exposure Speed In: Physics Procedia 78 (2015 ), S. 328-336 ISSN: 1875-3892 DOI: 10.1016/j.phpro.2015.11.047
Drummer D. , Drexler M. , Wudy K. :Density of Laser Molten Polymer Parts as Function of Powder Coating Process during Additive Manufacturing 7th World Congress on Particle Technology (WCPT7) (Beijing )In: New Paradigm of Particle Science and Technology Proceedings of The 7th World Congress on Particle Technology 2015
Drummer D. , Drexler M. , Wudy K. :Density of Laser Molten Polymer Parts as Function of Powder Coating Process during Additive Manufacturing In: Procedia Engineering 102 (2015 ), S. 1908-1917 ISSN: 1877-7058 DOI: 10.1016/j.proeng.2015.01.331
Drummer D. , Drexler M. , Wudy K. :Derivation of heating rate dependent exposure strategies for the selective laser melting of thermoplastic polymers PPS-30 (Cleveland )In: AIP Conference Proceedings 2015 DOI: 10.1063/1.4918513
Drummer D. , Harder R. , Witt G. , Wegner A. , Wudy K. , Drexler M. :Long-term Properties of Laser Sintered Parts of Polyamide 12 - Influence of Storage Time and Temperature on the Aging Behavior In: International Journal of Recent Contributions from Engineering, Science & IT 3 (2015 ), S. 20-27 ISSN: 2197-8581 DOI: 10.3991/ijes.v3i1.4289
Drummer D. , Heinle M. , Meister S. :Influence of short fibre reinforcement on properties of injection moulded micro parts in dependence of fibre content and part dimensions In: Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems 21 (2015 ), S. 1-9 ISSN: 0946-7076 DOI: 10.1007/s00542-015-2752-8
Drummer D. , Medina Hernandez M. , Drexler M. , Wudy K. :Polymer powder production for laser melting through immiscible blends In: Procedia Engineering 102 (2015 ), S. 1918-1925 ISSN: 1877-7058 DOI: 10.1016/j.proeng.2015.01.332
Drummer D. , Vittinghoff J. , Kleffel T. , Kuhmann K. , Farges O. , Gruhn M. , Risthaus M. , Baranowski T. , Koch R. , Nießen B. , Wehmeyer I. , Küsters K. , Lutter F. , Malek T. , Theiler S. , Braun S. , Jobi A. , Szabo SA. , Schwarzer R. , Mang S. , Welsch K. , Brandt P. , van Haag J. , Hopmann C. , Schild J. :Handbuch Kunststoff-Metall-Hybridtechnik Erlangen : Lehrstuhl für Kunststofftechnik , 2015 ISBN: 978-3-931864-66-8
Drummer D. , Wudy K. , Drexler M. :Modelling of the Aging Behavior of Polyamide 12 Powder during Laser Melting Process 30th Annual Meeting of the Polymer Processing Society (Cleveland, USA )In: Proceedings of the Polymer Processing Society 30th Annual Meeting 2015 DOI: 10.1063/1.4918514
Drummer D. , Wudy K. , Drexler M. :Selektives Strahlschmelzen von Polymer-Blends: Prozess- und Werkstoffanforderungen RapidTech 2015 (Erfurt )In: Tagungsband / Digital Proceedings RapidTech 2015 2015
Fischer C. , Drummer D. :Beeinflussung von tribologischen Eigenschaften durch dynamische Temperierung In: Zeitschrift Kunststofftechnik 11 (2015 ), S. 1-26 ISSN: 1864-2217
Fischer C. , Drummer D. :Influencing the tribological properties by dynamic tempering In: Zeitschrift Kunststofftechnik 2015 (2015 ), S. 44-68 ISSN: 1864-2217
Frey P. , Heinle M. , Drummer D. , Merklein M. :Influence of metal inserts with microformed edges on subsequent injection assembly moulding for media tight electronic systems 4th International Conference on New Forming Technology, ICNFT 2015 DOI: 10.1051/matecconf/20152109013
Frey P. , Heinle M. , Leisen C. , Drummer D. , Merklein M. :Embossing of Metal Inserts for Subsequent Assembly Injection Moulding of Media Tight In: Key Engineering Materials 639 (2015 ), S. 99-106 ISSN: 1013-9826
Frey P. , Heinle M. , Leisen C. , Drummer D. , Merklein M. :Embossing of metal inserts for subsequent assembly injection moulding of media tight electronic systems In: Key Engineering Materials 639 (2015 ), S. 99-106 ISSN: 1013-9826 DOI: 10.4028/www.scientific.net/KEM.639.99
Fuchs K. , Berger F. , Fischer A. , Drummer D. :Influencing factors on field inversion in HVDC cables Jicable'15 - 9th International Conference on Insulated Power Cables (Paris , 21. Juni 2015 - 25. Juni 2015 )In: Achter Workshop Optische Technologien - LED Beleuchtung - Technik und Anwendung , Garbsen : 2015
Galovskyi B. , Hausotte T. , Drummer D. , Harder R. :In-line layer wise measurements for selective laser sintering process XXI IMEKO World Congress “Measurement in Research and Industry” (Prague, Czech Republic , 30. August 2015 - 4. September 2015 )
Gath C. , Drummer D. :Studie zur Umsetzbarkeit der Laserdirektstrukturierung von lasergesinterten Bauteilen RapidTech 2015 (Erfurt , 10. Juni 2015 - 11. Juni 2015 )In: Tagungsband / Digital Proceedings RapidTech 2015 2015
Gierl B. , Drummer D. :Possibilities and potential of plastic gear applications International VDI Conference on High Performance Plastic Gears (München , 5. Oktober 2015 - 5. Oktober 2015 )
Gröschel C. , Drummer D. :Wall thickness distribution of continuous glass fiber reinforced polyamide 6 composite parts formed by gas pressure ANTEC 2015 (Cleveland, USA )In: SPE Proceedings ANTEC 2015
Heinle M. , Drummer D. :Heat transfer coefficient in injection molding of polymers In: International Polymer Processing 30 (2015 ), S. 434-441 ISSN: 0930-777X DOI: 10.3139/217.3084
Heinle M. , Drummer D. :Measuring mechanical stresses on inserts during injection molding In: Advances in Mechanical Engineering 7 (2015 ), S. 1-6 ISSN: 1687-8132 DOI: 10.1177/1687814015584479
Heinle M. , Drummer D. :Temperature-dependent coefficient of thermal expansion (CTE) of injection molded, short-glass-fiber-reinforced polymers In: Polymer Engineering and Science 55 (2015 ), S. 2661-2668 ISSN: 1548-2634 DOI: 10.1002/pen.24159
Jungmeier A. :The effect of temperature and pressure on microthermoforming thermoplastic films integrated in the injection moulding process In: Journal of Polymer Engineering (2015 ), S. 1-9 ISSN: 0334-6447 DOI: 10.1515/polyeng-2015-0232
Jungmeier A. , Drummer D. :Microthermoforming Integrated in the Injection Molding Process for Fabrication of Film-Based Microstructured Parts In: International Polymer Processing 30 (2015 ), S. 381-389 ISSN: 0930-777X
Jungmeier A. , Drummer D. :Mikrothermoformen thermoplastischer Folien im Spritzgießprozess 7. Kolloquium Mikroproduktion (Aachen , 16. November 2015 - 17. November 2015 )In: 7. Kolloquium Mikroproduktion , Aachen : 2015
Laumer T. , Wudy K. , Drexler M. , Amend P. , Drummer D. , Schmidt M. , Roth S. :Fundamental investigation of laser beam melting of polymers for additive manufacture (vol 26, 042003, 2014) In: Journal of Laser Applications 27 (2015 )ISSN: 1042-346X DOI: 10.2351/1.4897013
Launhardt M. , Drexler M. , Drummer D. :Rapid-Manufacturing-Process for Elastomeric Components In: International Journal of Recent Contributions from Engineering, Science & IT 3 (2015 )ISSN: 2197-8581 DOI: 10.3991/ijes.v3i2.4593
Launhardt M. , Fischer C. , Drummer D. :Research on the Influence of Geometry and Positioning on Laser Sintered Parts In: Applied Mechanics and Materials 805 (2015 ), S. 105-114 ISSN: 1660-9336 DOI: 10.4028/www.scientific.net/AMM.805.105
Leisen C. , Drummer D. :Vibrationsschweissen von strahlenvernetzten Polyamid 66 mit PA6T/6I GF 50 In: Joining Plastics - Fügen von Kunststoffen 9 (2015 ), S. 178-185 ISSN: 1864-3450
Leisen C. , Menacher M. , Drummer D. :Influence of Radiation Cross-Linking of Polyamide 66 on the Characteristics of the Vibration Welding Process In: Polymer Engineering and Science 55 (2015 ), S. 1-7 ISSN: 0032-3888 DOI: 10.1002/pen.24139
Löhner MJ. , Drummer D. :Influence of Processing Parameters in Reaction Injection Foam Molding on for Multi-Layer Parts on Foam Structure and Mechanical Properties In: Applied Mechanics and Materials 805 (2015 ), S. 131-138 ISSN: 1660-9336
Löhner MJ. , Drummer D. :The effect of pressure variations on the formation of gas inclusions in the rotational molding process In: Journal of Polymer Engineering 35 (2015 ), S. 481-491 ISSN: 0334-6447 DOI: 10.1515/polyeng-2014-0145
Löhner MJ. , Messingschlager S. , Drummer D. :Computertomographie in der Kunststofftechnik TECHNOMER 2015 (Chemnitz )In: Fachbeiträge Technomer 2015 2015
Meister S. , Seefried A. , Drummer D. :Replication quality of micro structures in injection moulded thin wall parts using rapid tooling moulds In: Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems (2015 ), S. 1-12 ISSN: 0946-7076 DOI: 10.1007/s00542-015-2415-9
Menacher M. , Leisen C. , Drummer D. :Influence of Radiation Cross-Linking on Fiber Orientation in Vibration Welds of Polyamide 66 In: Polymer Composites (2015 ), S. 1-7 ISSN: 0272-8397 DOI: 10.1002/pc.23607
Wegner A. , Harder R. , Witt G. , Drummer D. :Determination of Optimal Processing Conditions for the Production of Polyamide 11 Parts using the Laser Sintering Process In: International Journal of Recent Contributions from Engineering, Science & IT 3 (2015 ), S. 5-12 ISSN: 2197-8581 DOI: 10.3991/ijes.v3i1.4249
Wildner W. , Drummer D. :Modelling haze and transmission of transparent filled systems in dependence of filler surface area, refractive index difference and wavelength ANTEC 2015 (Orlando, USA )In: SPE Proceedings ANTEC 2015
Wudy K. , Drummer D. :Aging behavior of polyamide 12 during selective laser melting process - influence on mechanical properties ANTEC 2015 (Orlando, USA , 23. März 2015 - 25. März 2015 )In: Society of Plastics Engineers (Hrsg.): SPE Proceedings ANTEC 2015
Zhao M. , Drummer D. , Wudy K. , Drexler M. :Sintering Study of Polyamide 12 Particles for Selective Laser Melting In: International Journal of Recent Contributions from Engineering, Science & IT 3 (2015 ), S. 28-33 ISSN: 2197-8581 DOI: 10.3991/ijes.v3i1.4290
Zhao M. , Drummer D. , Wudy K. , Drexler M. :Untersuchung des Schmelz- und Sinterprozesses von Polyamid 12 beim selektiven Strahlschmelzen RapidTech 2015 (Erfurt )In: Tagungsband / Digital Proceedings RapidTech 2015 2015
2014
Drexler M. , Wudy K. , Drummer D. :Selektives Strahlschmelzen von Kunststoffen - Ganzheitliche Prozessbetrachtung zur gezielten Optimierung von Bauteileigenschaften 3. Industriekolloquium des SFB 814 (Nürnberg )In: 3. Industriekolloquium des SFB 814 , Erlangen : 2014
Drummer D. , Drexler M. , Wudy K. :Derivation of Heating Rate Dependent Exposure Strategies for the Selective Laser Melting of Thermoplastic Polymers 30th Annual Meeting of the Polymer Processing Society (Cleveland, USA )In: Proceedings of the Polymer Processing Society 30th Annual Meeting 2014
Drummer D. , Drexler M. , Wudy K. :Impact of Heating Rate During Exposure of Laser Molten Parts on the Processing Window of PA12 Powder In: Physics Procedia 56 (2014 ), S. 184-192 ISSN: 1875-3892 DOI: 10.1016/j.phpro.2014.08.162
Drummer D. , Drexler M. , Wudy K. :Influence of Energy Input on Degradation Behavior of Plastic Components Manufactured by Selective Laser Melting 5th International Conference on Additive Technologies - iCAT2014 (Vienna , 8. September 2014 - 11. September 2014 )In: Proceedings 5th International Conference on Additive Technologies - iCAT2014 , Ljubljana : 2014 DOI: 10.1016/j.phpro.2014.08.160
Drummer D. , Drexler M. , Wudy K. :Resulting melt-pool-shape during selective beam melting of thermoplastics as function of energy input parameters Fraunhofer Direct Digital Conference 2014 (Berlin )In: DDMC 2014, Proceedings of the Fraunhofer Direct Digital Manufacturing Conference , Aachen : 2014
Drummer D. , Gröschel C. , Hoffmann L. , Linn C. :Hochleistungsfaserverbundbauteile - Innovativer Verfahrensbaukasten In: emobility tec (2014 ), S. 8 ISSN: 2193-892X
Drummer D. , Harder R. , Witt G. , Wegner A. , Wudy K. , Drexler M. :Long-term properties of laser sintered parts of polyamide 12 - Influence of storage time and temperature on the ageing behaviour 5th International Conference on Additive Technologies - iCAT2014 (Vienna )In: Proceedings 5th International Conference on Additive Technologies - iCAT2014 , Ljubljana : 2014
Drummer D. , Jungmeier A. , Leisen C. , Peters G. :Neuartiges Werkzeug- und Temperierkonzept für tribologisch optimierte Mikroteile In: Konstruktion 1/2 (2014 ), S. 61-66 ISSN: 0720-5953
Drummer D. , Leisen C. , Jungmeier A. , Peters G. :Novel mold and tempering concept for tribological optimized micropartsnovel mold and tempering concept for tribological optimized microparts Neuartiges Werkzeug- und Temperierkonzept fur tribologisch optimierte Mikroteile In: Konstruktion 1/2-2014 (2014 ), S. 61-66 ISSN: 0720-5953 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84902134422&origin=inward
Drummer D. , Meister S. :Correlation of Processing, Inner Structure, and Part Properties of Injection Moulded Thin-Wall Parts on Example of Polyamide 66 In: International Journal of Polymer Science 2014 (2014 ), Art.Nr.: 718926 ISSN: 1687-9422 DOI: 10.1155/2014/718926
Drummer D. , Meister S. , Hofmann S. :Leichtfließend und orientierungsarm In: Plastverarbeiter : neue Technologien, Kosteneffizienz, erhöhte Marktchancen 6 (2014 ), S. 42-45 ISSN: 0032-1338
Drummer D. , Seefried A. , Meister S. :Characterization of Material Stiffness on Injection Moulded Microspecimens Using Different Test Methods In: Advances in Materials Science and Engineering (2014 ), S. 8 ISSN: 1687-8434 DOI: 10.1155/2014/769206
Drummer D. , Wudy K. , Drexler M. :Influence of Energy Input on Degradation Behavior of Polyamide 12 during selective Laser Melting Process Fraunhofer Direct Digital Conference 2014 (Berlin )In: DDMC 2014, Proceedings of the Fraunhofer Direct Digital Manufacturing Conference , Aachen : 2014
Drummer D. , Wudy K. , Drexler M. :Selective laser melting of polyamide 12: A holistic approach for the modeling of the aging behavior 5th International Conference on Additive Technologies - iCAT2014 (Vienna )In: Proceedings 5th International Conference on Additive Technologies - iCAT2014 , Ljubljana : 2014
Fischer A. , Müller H. , Kuhn T. , Drummer D. , Kück H. , Franke J. :Reliability of LDS Conductor Paths - Influencing Factors and Characterization Methods Molded Interconnected Devices (Fürth , 24. September 2014 )In: Franke J, Kuhn T, Birkicht A, Pojtinger A (Hrsg.): 11th International Congress Molded Interconnect Devices , Nürnberg : 2014
Fischer A. , Ranft F. , Drummer D. :Auslegungsstrategie für Hochleistungs-LED-Systeme auf Basis wärmeleitender Kunststoffe VDI - Kunststoffe in Optischen Systemen (Baden-Baden , 1. Oktober 2014 )
Fischer C. , Drummer D. :The Influence of Inner Component and Topographical Properties on Tribological Parameters of Injection-Moulded Microparts In: Advances in Mechanical Engineering 10 (2014 ), S. 10 ISSN: 1687-8132 DOI: 10.1155/2014/321674
Fischer C. , Leisen C. , Merken D. , Jungmeier A. , Drummer D. :The influence of proccessing temperature on morphological and tribological properties of injection-moulded micro parts In: Advances in Mechanical Engineering (2014 )ISSN: 1687-8132 DOI: 10.1155/2014/218761
Galovskyi B. , Hausotte T. , Drummer D. , Zhao M. :Model of a Measurement Artifact for Additive Manufacturing 5th International Conference on Additive Technologies - iCAT2014 (Vienna )In: Proceedings 5th International Conference on Additive Technologies - iCAT2014 , Ljubljana : 2014
Gröschel C. , Drummer D. :The Influence of Moisture and Laminate Setup on the De-Consolidation Behavior of PA6/GF Thermoplastic Matrix Composites In: International Polymer Processing 5 (2014 ), S. 660-668 ISSN: 0930-777X
Gröschel C. , Drummer D. :Twin-O-Sheet: producing functionalized hollow bodies in a shorter process chain In: JEC Composites Magazine 05 (2014 ), S. 51-53 ISSN: 1639-965X
Kurth K. , Drummer D. :Influences of the design and production on the characteristic properties of multipolar bonded magnets 2014 4th International Electric Drives Production Conference, EDPC 2014 DOI: 10.1109/EDPC.2014.6984391
Laumer T. , Wudy K. , Drexler M. , Amend P. , Drummer D. , Schmidt M. , Roth S. :Fundamental investigation of laser beam melting of polymers for additive manufacture In: Journal of Laser Applications 26 (2014 )ISSN: 1042-346X DOI: 10.2351/1.4892848
Linn C. , Hoffmann L. , Gröschel C. , Drummer D. :Großvolumige Organoblech-Hohlkörperstrukturen in einem Schuss In: Lightweight Design 7 (2014 ), S. 44-49 ISSN: 1865-4819
Meister S. , Drummer D. :Dimension-dependent long-term properties of injection molded micro parts ANTEC 2014 (Las Vegas, USA )In: SPE ANTEC 2014 2014
Merken D. , Drummer D. :Friction and wear of thermoplastic polymers with respect to spur-gear applications 1st International Conference on Polymer Tribology (Bled, Slovenia )In: PolyTrib 2014 2014
Messingschlager S. , Drummer D. :Material Characterization of Strontium Ferrite Powders for Producing Sintered Magnets by Ceramic Injection Molding In: Advances in Materials Science and Engineering 2014 (2014 ), S. 8 ISSN: 1687-8434
Messingschlager S. , Drummer D. :One-Shot Production of Sintered Magnets In: Kunststoffe International 3 (2014 ), S. 62-65 ISSN: 1862-4243
Messingschlager S. , Drummer D. :Sintermagnete aus einem Guss In: Kunststoffe 3 (2014 ), S. 100-103 ISSN: 0023-5563
Messingschlager S. , Drummer D. :Wenn Pulver ein Lächeln zaubert In: Plastverarbeiter : neue Technologien, Kosteneffizienz, erhöhte Marktchancen (2014 ), S. 78-80 ISSN: 0032-1338
Plettke R. , Schaub A. , Gröschel C. , Scheitler CJ. , Heinle M. , Ranft F. , Merklein M. , Schmidt M. , Drummer D. :A new process chain for joining sheet metal to fibre composite sheets Material Forming ESAFORM 2014 (Finnland , 7. Mai 2014 - 9. Mai 2014 )In: Key Engineering Materials (Volumes 611 - 612) 2014 DOI: 10.4028/www.scientific.net/KEM.611-612.1468
Plettke R. , Schaub A. , Gröschel C. , Scheitler CJ. , Vetter M. , Hentschel O. , Ranft F. , Merklein M. , Schmidt M. , Drummer D. :A new process chain for joining sheet metal to fibre composite sheets In: Key Engineering Materials 611-612 (2014 ), S. 1468-1475 ISSN: 1013-9826 DOI: 10.4028/www.scientific.net/KEM.611-612.1468
Ranft F. , Menacher M. , Drummer D. :Vibrationsschweißen wärmeleitender Thermoplaste In: Joining Plastics - Fügen von Kunststoffen 8 (2014 ), S. 119-127 ISSN: 1864-3450
Riedlbauer DR. , Drexler M. , Drummer D. , Steinmann P. , Mergheim J. :Modelling, simulation and experimental validation of heat transfer in selective laser melting of the polymeric material PA12 In: Computational Materials Science 93 (2014 ), S. 239-248 ISSN: 0927-0256 DOI: 10.1016/j.commatsci.2014.06.046
Seefried A. , Drummer D. :Thermoforming radiation crosslinked polyamide - effects of degree of cross linking and thermoforming processing conditions ANTEC 2014 (Las Vegas, USA )In: SPE ANTEC 2014 2014
Vittinghoff J. , Drummer D. :Investigating the full-faced joining of polymer-metal hybrid structures ANTEC 2014 (Las Vegas, USA )In: SPE ANTEC 2014 2014
Wegner A. , Harder R. , Witt G. , Drummer D. :Influence of Process Parameters on the Part Properties of Laser Sintered Polyamide 11 5th International Conference on Additive Technologies - iCAT2014 (Vienna )In: Proceedings 5th International Conference on Additive Technologies - iCAT2014 , Ljubljana : 2014
Wildner W. , Drummer D. :Wavelength Dependent Haze of Transparent Glass-Particle Filled Poly(Methyl Methacrylate) Composites In: ISRN Optics (2014 ), Art.Nr.: 802369 ISSN: 2090-7826 DOI: 10.1155/2014/802369
Wudy K. , Drummer D. , Drexler M. :Influence of degradation behavior of polyamid 12 powders in laser sintering process on produced parts 29th Annual Meeting of the Polymer Processing Society (Nürnberg )In: Proceedings of the Polymer Processing Society 29th Annual Meeting 2014 DOI: 10.1063/1.4873873
Zhao M. , Drummer D. , Wudy K. , Drexler M. :Sintering Study of Polyamide 12 Particles for Selective Laser Melting 5th International Conference on Additive Technologies - iCAT2014 (Vienna )In: Proceedings 5th International Conference on Additive Technologies - iCAT2014 , Ljubljana : 2014
2013
Drexler M. , Drummer D. , Wudy K. :Effects of the powder bulk density on the porosity of laser molten thermoplastic parts 29th Annual Meeting of the Polymer Processing Society (Nürnberg )In: Proceedings of the Polymer Processing Society 29th Annual Meeting 2013
Drexler M. , Drummer D. , Wudy K. , Riedlbauer DR. , Steinmann P. , Mergheim J. :Selektives Laserstrahlschmelzen von Kunststoffen - Modellierung des Temperaturhaushaltes und Einfluss auf resultierende Bauteileigenschaften 2. Industriekolloquium des SFB 814 (Nürnberg )In: 2. Industriekolloquium des SFB 814 2013
Drummer D. , Drexler M. , Wudy K. :Einfluss der Scangeschwindigkeit auf die Bauteileigenschaften pulver- und strahlbasierter Verfahren In: RTejournal - Forum für Rapid Technologie 7 (2013 ), S. - ISSN: 1614-0923
Drummer D. , Fuchs M. :Kunststoffe in der Elektronikproduktion Laser in der Elektronikproduktion & Feinwerktechnik (LEF) (Fürth )In: LEF 2013 2013
Drummer D. , Gröschel C. , Seefried A. :Direkte Umformung von Organoblechen durch Gasdruck In: Kunststoffe (2013 ), S. 70-74 ISSN: 0023-5563
Drummer D. , Messingschlager S. :Auswirkungen differierender Füllgrade auf die Urform- und Sintereigentschaften im Keramikspritzguss In: Keramische Zeitschrift (2013 ), S. 36-40 ISSN: 0023-0561
Drummer D. , Messingschlager S. :Influence of different filling degrees on the original shape and sintering behavior in ceramic injection moulding In: Keramische Zeitschrift 65 (2013 ), S. 36-40 ISSN: 0023-0561 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84880224707&origin=inward
Gröschel C. , Drummer D. :Integrative Herstellung von Hochleistungsfaserverbund-strukturen durch Umformung mit Gasdruck Integrative Herstellung von Hochleistungsfaserverbund-strukturen durch Umformung mit Gasdruck (Fürth )In: Integrative Herstellung von Hochleistungsfaserverbund-strukturen durch Umformung mit Gasdruck 2013
Gröschel C. , Drummer D. , Seefried A. :Direct Forming of Organosheets by Gas Pressure In: Kunststoffe International 12 (2013 ), S. 54-57 ISSN: 1862-4243
Heinle M. , Drummer D. :Calculation of the anisotropic, temperature-dependent thermal expansion coefficient (TEC) of parts made from short-fiber-reinforced polymers 71st Annual Technical Conference of the Society of Plastics Engineers 2013, ANTEC 2013 (Cincinnati, OH )In: SPE Proceedings ANTEC 2013 2013 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84903525119&origin=inward
Heinle M. , Drummer D. :Konstruktiv arbeiten mit der anisotropen thermischen Dehnung von verstärkten Kunststoffen In: Konstruktion (2013 ), S. 83-87 ISSN: 0720-5953
Heinle M. , Drummer D. , Ehrenstein G. :Dichtheit von Steckverbindern unter Temperaturbelastung 4th International Connectors Symposium (Lemgo )In: Symposium Connectors GMM Fachtagung 2013
Kurth K. , Drummer D. :Improvement of the magnetic properties of injection molded polymer bonded magnets 2013 3rd International Electric Drives Production Conference, EDPC 2013 (Nuremberg , 29. Oktober 2013 - 30. Oktober 2013 ) DOI: 10.1109/EDPC.2013.6689718
Meister S. , Drummer D. :Affecting the Ageing Behaviour of Injection-Moulded Microparts Using Variothermal Mould Tempering In: Advances in Mechanical Engineering (2013 ), Art.Nr.: 407964 ISSN: 1687-8132 DOI: 10.1155/2013/407964
Meister S. , Drummer D. :Alterung bei Mikrospritzgießteilen - Einfluss variothermer Werkzeugtemperierung In: GIT Labor-Fachzeitschrift (2013 ), S. 300-302 ISSN: 0016-3538
Meister S. , Drummer D. :Influence of manufacturing conditions on measurement of mechanical material properties on thermoplastic micro tensile bars In: Polymer Testing 32 (2013 ), S. 432-437 ISSN: 0142-9418 DOI: 10.1016/j.polymertesting.2012.12.006
Meister S. , Drummer D. :Influence of mold Temperature on mold Filling Behavior and Part Properties in Micro Injection molding In: International Polymer Processing 28 (2013 ), S. 550-557 ISSN: 0930-777X DOI: 10.3139/217.2804
Meister S. , Drummer D. :Investigation on the Achievable Flow Length in Injection Moulding of Polymeric Materials with Dynamic Mould Tempering In: Thescientificworldjournal (2013 )ISSN: 1537-744X DOI: 10.1155/2013/845916
Meister S. , Jungmeier A. , Drummer D. :Long-Term Properties of Injection-Molded Micro-Parts: Influence of Part Dimensions and Cooling Conditions on Aging Behavior In: Macromolecular Materials and Engineering 297 (2013 ), S. 994-1004 ISSN: 1438-7492
Meister S. , Vetter K. , Drummer D. :Mechanische Kennwertermittlung für Mikrobauteile an spritzgegossenen Mikro-Zugprüfkörpern In: Zeitschrift Kunststofftechnik 9 (2013 ), S. 74-99 ISSN: 1864-2217
Meister S. , Vetter K. , Drummer D. , Ehrenstein G. :Measurement of mechanical material properties for micro parts on injection moulded micro tensile bars In: Zeitschrift Kunststofftechnik 9 (2013 ), S. 74-99 ISSN: 1864-2217 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84873619715&origin=inward
Menacher M. , Drummer D. :Mischmaterialverbindungen: Kleben mit Vibrationstechnik In: Lightweight Design 6 (2013 ), S. 56-61 ISSN: 1865-4819
Menacher M. , Leisen C. , Drummer D. :Formschlüssiges Fügen von Metallen mit Faserverbundkunststoffen mittels Vibrationsschweißtechnik Große Schweißtechnische Tagung (Essen )In: DVS Berichte Band 296 zur Großen Schweißtechnischen Tagung 2013
Merken D. , Drummer D. :Temperatur and Sliding Distance Dependency of Assembly molded Friction Clutches 71st Annual Technical Conference of the Society of Plastics Engineers 2013, ANTEC 2013 (Cincinnati, OH )In: SPE Proceedings ANTEC 2013 2013 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84903541123&origin=inward
Messingschlager S. , Drummer D. :Ceramic injection molding - Material analysis, modeling and injection molding simulation 29th Annual Meeting of the Polymer Processing Society (Nürnberg )In: Proceedings of the Polymer Processing Society 29th Annual Meeting 2013
Messingschlager S. , Heinle M. , Drummer D. :Aufbereitung im Keramikspritzguss 23. Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz )In: Technomer 2013 2013
Ranft F. , Drummer D. :Angepasste Füllstoffsysteme für das Spritzgießen von Kunststoffbauteilen mit erhöhter Wärmeleitfähigkeit 23. Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz )In: Technomer 2013 2013
Ranft F. , Fischer A. , Drummer D. :Entwicklung neuartiger Hochleistungs-LED-Systeme auf Basis wärmeleitender Kunststoffe SMT 2013 - MID Forum (Nürnberg , 16. April 2014 - 16. April 2014 )
Seefried A. , Drummer D. :Multiaxial elongational behaviour of radiation cross linked polyamide melts In: Zeitschrift Kunststofftechnik (2013 ), S. 295-319 ISSN: 1864-2217
Seefried A. , Drummer D. :Multiaxiales Dehnverhalten strahlenvernetzter Polyamidschmelzen In: Zeitschrift Kunststofftechnik 9 (2013 ), S. 296-319 ISSN: 1864-2217
Vittinghoff J. , Drummer D. :Analyse des stoffschlüssigen Verbunds an Kunststoff-Metall-Hybridbauteilen 13. Fachtagung - FTK - Fertigungstechnologie Kleben (Stuttgart )In: Fertigungstechnologie Kleben 2013
Wudy K. , Drexler M. , Drummer D. :Strategien zur Realisierung konstanter Pulver- und Bauteileigenschaften beim selektiven Laserstrahlschmelzen von Kunststoffen 2. Industriekolloquium des SFB 814 (Nürnberg )In: 2. Industriekolloquium des SFB 814 2013
Wudy K. , Drummer D. , Drexler M. :Characterization of polymer materials and powders for selective laser melting 29th Annual Meeting of the Polymer Processing Society (Nürnberg )In: Proceedings of the Polymer Processing Society 29th Annual Meeting 2013
Wudy K. , Drummer D. , Drexler M. :Langzeitverhalten von Polyamid 12 Pulver zur Verarbeitung mittels selektivem Laserstrahlschmelzen Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz )In: Technomer 2013 2013
Wudy K. , Kühnlein F. , Drummer D. , Drexler M. :Materialalterung beim Rapid Manufacturing - Alterungsverhalten von Kunststoffpulvern beim selektiven Strahlschmelzen In: GIT Labor-Fachzeitschrift (2013 ), S. 372-375 ISSN: 0016-3538
2012
Drexler M. , Kühnlein F. , Drummer D. :Effects on the density distribution of SLS-parts Laser Assisted Net Shape Engineering 7 (Fürth )In: Physics Procedia 39 2012 DOI: 10.1016/j.phpro.2012.10.066
Drexler M. , Kühnlein F. , Drummer D. :Influence of powder coating on part density as a function of coating parameters 4th International Conference on Additive Technologies (Maribor )In: 4th International Conference on Additive Technologies 2012
Drexler M. , Kühnlein F. , Drummer D. :Modeling of Transient Thermal Conditions During Selective Laser Melting 1st International Conference on Thermo-Mechanically Graded Materials (Kassel )In: 1st International Conference on Thermo-Mechanically Graded Materials 2012
Drummer D. :Influence of the filler premagnetization in hot runner on its orientability during injection molding of multi polar SmCo-magnets 22nd International Conference and Exhibit: Vital Technologies for Business Success in Changing Global Market, MOLDING 2012 (Miami, FL ) URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84902380484∨igin=inward
Drummer D. :Plastic-metal hybrid technology: Materially coherently bonded in injection molding In: Adhaesion Kleben und Dichten (2012 ), S. 42-46 ISSN: 0943-1454 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84865747942∨igin=inward
Drummer D. , Bach FW. , Hopmann C. , Möhwald K. , Piotter V. , Fischer T. , Meister S. , Prehm J. , Prokop J. , Vetter K. , Ehrenstein G. :Neue Prozesstechnologien für die Mikrofertigung In: Mikroproduktion 10 (2012 ), S. 50-57 ISSN: 1614-4538
Drummer D. , Cifuentes SC. , Rietzel D. :Suitability of PLA/TCP for Fused Deposition Modeling In: Rapid Prototyping Journal 18 (2012 ), S. - ISSN: 1355-2546 DOI: 10.1108/13552541211272045
Drummer D. , Hopmann C. , Vetter K. , Meister S. , Fischer T. , Piotter V. , Prokop J. , Ehrenstein G. :Analysis and Comparative Assessment of Different Process Technologies for Manufacturing Polymer Micro-Elements In: Materials Science and Engineering B-Advanced Functional Solid-State Materials 2 (2012 ), S. 347-362 ISSN: 0921-5107
Drummer D. , Hopmann C. , Vetter K. , Meister S. , Fischer T. , Piotter V. , Prokop J. , Ehrenstein G. :Innovative process technologies for manufacturing thermoplastic micro parts - Analysis and comparative assessment In: Zeitschrift Kunststofftechnik 8 (2012 ), S. 439-467 ISSN: 1864-2217 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84870001732&origin=inward
Drummer D. , Hopmann C. , Vetter K. , Meister S. , Fischer T. , Piotter V. , Prokop J. , Ehrenstein G. :Innovative Prozesstechnologien für die Herstellung thermoplastischer Mikrobauteile - Analyse und vergleichende Bewertung In: Zeitschrift Kunststofftechnik 8 (2012 ), S. 439-467 ISSN: 1864-2217
Drummer D. , Kobes M. , Merken D. :A contribution for qualitatively modeling of friction and wear behavior of thermoplastics ANTEC 2012 (Orlando , 2. April 2012 - 4. April 2012 )In: SPE Proceedings ANTEC 2012 2012
Drummer D. , Kühnlein F. , Drexler M. :Degradation behaviour of PA 12 powders in laser sintering iCAT 2012 - 4th International Conference on Additive Technologies (Maribor )In: Proceedings of the 4th International Conference on Additive Technologies (ICAT 2012) 2012
Drummer D. , Kühnlein F. , Meister S. , Drexler M. :Investigations on the degradation behaviour of PA 12 plastic powders - Influence of high temperatures on the moleculare weight 13th Annual International RAPDASA 2012 Conference (South Africa )In: Proceedings of the 13th RAPDASA annual international Conference 2012
Drummer D. , Meister S. , Ehrenstein G. :Einfluss des Werkzeugwerkstoffs auf die Struktur und die Eigenschaften von Mikrobauteilen 3. Industriekolloquium der Forschergruppe 702 (Aachen )In: 3. Industriekolloquium der Forschergruppe 702 2012
Drummer D. , Messingschlager S. :Einsatz der Computertomographie zur Material- und Prozesscharakterisierung im Keramikspritzguss 46. Meallographie-Tagung (Rostok )In: 46. Meallographie-Tagung 2012
Drummer D. , Ranft F. , Wildner W. :Kunststoffe in Optischen Systemen In: Kunststoffe 102 (2012 ), S. 20-24 ISSN: 0023-5563
Drummer D. , Ranft F. , Wildner W. :Plastics in Optical Systems In: Kunststoffe International (2012 ), S. 6-10 ISSN: 1862-4243
Drummer D. , Ranft F. , Wildner W. :Trend report: Plastics in optical systems In: Kunststoffe International 102 (2012 ), S. 6-10 ISSN: 1862-4243 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84868565566&origin=inward
Drummer D. , Schmidt A. , Seefried A. , Kühnert I. , Ehrenstein G. :Einfluss der Prozessführung auf die Bauteileigenschaften bei der Druckverfestigung amorpher Thermoplaste In: Zeitschrift Kunststofftechnik 8 (2012 ), S. 138-178 ISSN: 1864-2217
Drummer D. , Vetter K. , Ehrenstein G. :Spritzgießen von Mikrobauteilen durch Schmelzevorkompression 3. Industriekolloquium der Forschergruppe 702 (Achen )In: 3. Industriekolloquium der Forschergruppe 702 2012
Fuchs M. , Ranft F. , Drummer D. :Thermal Conductive-Modified Polyamide Compounds for Manufacturing MID and Film Substrates 10. International Congress MID (Fürth )In: 10. International Congress MID 2012
Goth C. , Heinle M. , Franke J. , Drummer D. :Mediendichte Umhausung spritzgegossener, räumlicher elektronischer Schaltungsträger im Montagespritzguss In: PLUS - Produktion von Leiterplatten und Systemen (2012 ), S. 376-385
Hartmann W. , Hausotte T. , Drummer D. , Wudy K. :Anforderungen und Randbedingungen für den Einsatz optischer Messsysteme zur In-Line-Prüfung additiv gefertigter Bauteile Rapid.Tech 2012 (Erfurt )In: RTejournal - Forum für Rapid Technologie 2012 URL: http://www.rtejournal.de/ausgabe9/3327/
Hartmann W. , Hausotte T. , Kühnlein F. , Drummer D. :Incremental In-line Measurement Technique for Additive Manufacturing Direct Digital Manufacturing Conference (DDMC) (Berlin )In: Proceedings 2012
Heinle M. , Drummer D. :Hybridtechnik in mechatronischen Systemen Hybridica Forum (Müchen )In: Hybridica Foum 2012
Heinle M. , Drummer D. :Stress im Prozess - Belastung elektronischer Bauelemente im Montage-Spritzgießprozess In: Plastverarbeiter : neue Technologien, Kosteneffizienz, erhöhte Marktchancen 63 (2012 ), S. 62-66 ISSN: 0032-1338
Heinle M. , Goth C. , Drummer D. , Franke J. :Assembly Molding for Resistant Media Tight Molded Interconnect Devices 15th Int. Conference Polymeric Materials (Halle )In: 15th Int. Conference Polymeric Materials 2012
Hoffmann L. , Müller T. , Drummer D. :Hochbelastbare Leichtbauteile aus der Spritzgießmaschine - Werkstoffe, Verfahren und Perspektiven Mitteldeutscher Kunststofftag 2012 (Leipzig )In: Mitteldeutscher Kunststofftag 2012 2012
Jungmeier A. , Wildner W. , Drummer D. , Kühnert I. :Compression-Induced Solidification: A Novel Processing Technique for Precise Thermoplastic Optical Components with Negligible Internal Stresses In: ISRN Optics 2012 (2012 ), Art.Nr.: 872816 ISSN: 2090-7826 DOI: 10.5402/2012/872816
Kühnlein F. , Rietzel D. , Drummer D. :Investigations of the directional mechanical properties and reasons of fracture of Mask Sintered PA12-components In: Zeitschrift Kunststofftechnik 8 (2012 ), S. 106-137 ISSN: 1864-2217 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84857846193&origin=inward
Kühnlein F. , Rietzel D. , Drummer D. :Untersuchung der richtungsabhängigen mechanischen Eigenschaften und Bruchursachen maskengesinterter PA12-Bauteile In: Zeitschrift Kunststofftechnik 8 (2012 ), S. 106-137 ISSN: 1864-2217
Linn C. , Hoffmann L. , Müller T. , Drummer D. :Herstellung von CFK-Bauteilen durch Direktimprägnierung mit Thermoplasten in der Spritzgießmaschine In: Lightweight Design (2012 ), S. 56-61 ISSN: 1865-4819
Meister S. , Drummer D. :Eigenschaftsoptimierung von Mikrobauteilen - Spritzgießen mit variothermer Werkzeugtemperierung In: Konstruktion 11 (2012 ), S. 11-13 ISSN: 0720-5953
Meister S. , Drummer D. :Orientierungsarm dank langsamer Abkühlung In: Mikroproduktion (2012 ), S. 54-58 ISSN: 1614-4538
Menacher M. , Drummer D. :Cross-linking in adhesives using vibration technology In: Adhesion Adhesives & Sealants 1 (2012 ), S. 42-46 ISSN: 2192-2624
Menacher M. , Drummer D. :Kleben mittels Vibrationstechnologie - schnell, selbstreinigend und qualitätssicher In: Joining Plastics - Fügen von Kunststoffen 6 (2012 ), S. 38-43 ISSN: 1864-3450
Merken D. , Drummer D. :Assembly injection molded friction clutches as mechanical overload protection for mechatronic devices 2012 2nd International Electric Drives Production Conference, EDPC 2012 (Nürnberg )In: Electric Drives Production Conference 2012 DOI: 10.1109/EDPC.2012.6425127
Merken D. , Kobes M. , Drummer D. :Mehr-Komponenten-Technologie steigert Leistungsfähigkeit von Kunststoffzahnrädern In: Konstruktion (2012 ), S. 77-82 ISSN: 0720-5953
Merken D. , Kobes M. , Drummer D. :Multi component technology enhances capability of plastic gears In: Konstruktion (2012 ), S. 77-82 ISSN: 0720-5953 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84897882446&origin=inward
Müller T. , Drummer D. :Ein energieeffizientes Verfahren für den Leichtbau In: Kunststoffe (2012 ), S. - ISSN: 0023-5563
Müller T. , Drummer D. :Process combinations as a key for producing lightweight and high-duty composite structures based on thermoplastic materials 15th European Conference on Composite Materials (Venedig , 24. Juni 2012 - 28. Juni 2012 )In: 15th European Conference on Composite Materials 2012
Müller T. , Gröschel C. , Drummer D. :Formgebung von thermoplastischen Faserverbundbauteilen durch Verfahrenskombination VDI Wissensforum: Composites effizient verarbeiten (Bremen )In: VDI Wissensforum: Composites effizient verarbeiten 2012
Nachtrab S. , Kapfer S. , Rietzel D. , Drummer D. , Madadi M. , Arns C. , Kraynik AM. , Schröder-Turk G. , Mecke K. :Tuning Elasticity of Open-Cell Solid Foams and Bone Scaffolds via Randomized Vertex Connectivity In: Advanced Engineering Materials 14 (2012 ), S. 120-124 ISSN: 1438-1656 DOI: 10.1002/adem.201100145
Ranft F. , Drummer D. :Laser direct structuring of thermally conductive polymers MID Kongress (Fürth )In: MID Kongress 2012
Ranft F. , Drummer D. :Wärmeleitende Kunststoffe für das thermische Management optoelektronischer Baugruppen VDI-Fachkonferenz (Baden-Baden )In: VDI-Fachkonferenz 2012
Ranft F. , Drummer D. :Wärmeleitfähige Kunststoffe zur Temperierung mechatronischer Systeme VDI Wissensforum (Fürth )In: VDI Wissensforum 2012
Ranft F. , Drummer D. , Heinle C. :Wärmemanagement mit hochgefüllten Kunststoffen Erlanger-Bayreuther-Kunststofftage (Erlangen )In: Erlanger-Bayreuther-Kunststofftage 2012
Ranft F. , Heinle C. , Drummer D. :Laser direct structuring of thermally conductive polymers: An innovative thermal management approach ANTEC 2012 (Orlando , 2. April 2012 - 4. April 2012 )In: SPE Proceedings ANTEC 2012 2012
Ranft F. , Heinle M. , Heinle C. , Drummer D. :Wärmeleitende Kunststoffe in der Elektronik OTTI-Fachforum (Regensburg )In: OTTI-Fachforum 2012
Rudin B. , Drummer D. :Heat conductive thermosets for the injection molding process 2nd International Electric Drives Production Conference (Nürnberg , 15. Oktober 2012 - 18. Oktober 2012 )In: EDPC 2012 - Proceedings 2012 DOI: 10.1109/EDPC.2012.6425136
Seefried A. , Drummer D. :Elongational Rheology of Cross Linked Polymaide 12 and its Relevance for Vacuum Thermoforming POLYCHAR 20 World Forum on Advanced Materials (Dubrovnik )In: POLYCHAR 20 World Forum on Advanced Materials 2012
Seefried A. , Drummer D. :The effects of radiation cross-linking and process parameters on the behavior of polyamide 12 in vacuum thermoforming In: Polymer Engineering and Science 52 (2012 ), S. 884-892 ISSN: 0032-3888 DOI: 10.1002/pen.22155
Seefried A. , Fuchs M. , Drummer D. :Radiation Cross Linking of Semi-Crystalline Thermoplastics – A Novel Approach in Modifing a Materials’s Thermoformability 8th European Thermoforming Conference (Venedig )In: 8th European Thermoforming Conference 2012
Seefried A. , Fuchs M. , Drummer D. :Radiation Crosslinking of Semicrystalline Thermoplastics: A Novel Approach to Modifying a Material's Thermoformability In: Plastics Engineering (2012 ), S. 14-22 ISSN: 0091-9578
Vittinghoff J. , Drummer D. :Im Spritzguss stoffschlüssig verbunden In: Adhaesion Kleben und Dichten (2012 ), S. 2-6 ISSN: 1619-1919
Wildner W. , Drummer D. , Kühnert I. :Druckverfestigung: Übertragung der Grundlagen auf die Spritzgießvariante VDI-Fachkonferenz (Baden-Baden )In: VDI-Fachkonferenz 2012
Wudy K. , Drummer D. , Kühnlein F. :Polymer Blends for Selective Laser Sintering: Material and Process Requirements Laser Assisted Net Shape Engineering 7 (Fürth )In: Physics Procedia 39 2012 DOI: 10.1016/j.phpro.2012.10.067
2011
Menacher M., Drummer D.:Joining of synthetic materials: Adhesive curing through vibration technology In: Adhaesion Kleben und Dichten (2011 ), S. 42-46 ISSN: 0943-1454 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84855671677&origin=inward
Drummer D. (Hrsg.):Thermoplastische Faserverbundkunststoffe - Werkstoff | Verarbeitung | Simulation | Anwendung Erlangen : 2011 ISBN: 978-3-931864-52-1
Drummer D. , Gardocki A. :Kunststoffgebundene Dauermagnete für Aktor- und Sensoranwendungen VDI-Technikforum: Kunststoffe in der Mechatronik (Fürth )In: Kunststoffe in der Mechatronik 2011
Drummer D. , Gruber K. , Meister S. :Alternating Temperature Technology Controls Parts Properties In: Kunststoffe International 101 (2011 ), S. 25-27 ISSN: 1862-4243
Drummer D. , Gruber K. , Meister S. :Process optimization: Alternating temperature technology controls parts properties In: Kunststoffe International 101 (2011 ), S. 25-27 ISSN: 1862-4243 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=79955685823&origin=inward
Drummer D. , Gruber K. , Meister S. :Wechseltemperierung steuert Bauteileigenschaften In: Kunststoffe 101 (2011 ), S. 46-49 ISSN: 0023-5563
Drummer D. , Heinle C. :Wärmeleitfähige Kunststoffe zur Temperierung mechatronischer Systeme - aus Sicht der Hochschule VDI-Technikforum: Kunststoffe in der Mechatronik (Fürth )In: Kunststoffe in der Mechatronik 2011
Drummer D. , Kobes M. , Merken D. , Meister S. :Wie das Spritzgießen den Verschleiß bei Zahnrädern reduziert In: Maschinenmarkt 117 (2011 ), S. 36-39 ISSN: 0341-5775
Drummer D. , Kühnlein F. :Mechanische Eigenschaften und Bruchverhalten maskengesinterter Kunststoffbauteile Rapid.Tech 2011 (Erfurt )In: Rapid.Tech 2011 2011
Drummer D. , Kühnlein F. :Mechanische Eigenschaften und Bruchverhalten maskengesinterter Kunststoffbauteile In: RTejournal - Forum für Rapid Technologie 8 (2011 ), S. 1 ISSN: 1614-0923
Drummer D. , Meister S. :Dauergebrauchseigenschaften von Mikrobauteilen - Einfluss von Herstell- und Einsatzbedingungen Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 (Karlsruhe )In: Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 2011
Drummer D. , Meister S. :Einfluss von Herstell- und Umgebungsbedingungen auf die Eigenschaften spritzgegossener Mikrobauteile aus Polyamid 66 22. Technomer 2011 (Chemnitz )In: 22. Technomer 2011 2011
Drummer D. , Menacher M. , Seefried A. :Vibrationsschweißen von strahlenvernetztem Polyamid 66 - Untersuchungen zur Erweiterung des Anwendungsspektrums In: Joining Plastics - Fügen von Kunststoffen 5 (2011 ), S. 46-57 ISSN: 1864-3450
Drummer D. , Müller T. :Das Automobil von morgen - Kunststoff-Lösungen und technische Trends 35. Internationaler Kongress: Kunststoffe im Automobilbau (Mannheim )In: Kunststoffe im Automobilbau 2011
Drummer D. , Müller T. , Hoffmann L. , Müller N. :Hohlkörperverbundstrukturen im Minutentakt In: Kunststoffe 101 (2011 ), S. 110-114 ISSN: 0023-5563
Drummer D. , Müller T. , Hoffmann L. , Müller N. :Hollow Composite Structures One-a-minute In: Kunststoffe International 101 (2011 ), S. 69-73 ISSN: 1862-4243
Drummer D. , Ranft F. :Verfahrenstechnische Herausforderungen bei der Einarbeitung von elektrisch leitfähigen Masterbatches mit Multi-walled Carbon Nanotubes im Spritzgießprozess 22. Technomer 2011 (Chemnitz )In: 22. Technomer 2011 2011
Drummer D. , Seefried A. :Thermoformability of Radiation cross linked Polyamide 12 ANTEC (Boston, Massachusetts, USA , 1. Mai 2011 - 5. Mai 2011 )In: SPE Proceedings ANTEC 2011 2011
Drummer D. , Vetter K. :Analyse von Skalierungseffekten beim Expansionsspritzgießen von Mikro- und Dünnwandbauteilen Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 (Karlsruhe )In: Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 2011
Drummer D. , Vetter K. :Expansion-injection-molding (EIM) by cavity near melt compression - About the process characteristic In: CIRP Journal of Manufacturing Science and Technology 4 (2011 ), S. 376-381 ISSN: 1755-5817 DOI: 10.1016/j.cirpj.2011.06.009
Drummer D. , Vetter K. :Influence of Expansion Injection Moulding (EIM) upon Part Properties 44th Conference on Manufacturing Systems (Madison, WI )In: 44th Conference on Manufacturing Systems 2011
Drummer D. , Vittinghoff J. :Piezoaktive Faserverbundbauteile - Health Monitoring an verbundspritzgegossenen Sandwichstrukturen 17. Nationales Symposiu, Sampe (Aachen )In: 17. Nationales Symposium 2011
Gardocki A. , Drummer D. :Funktionsorientierte Herstellung eines Encoders auf Basis kunststoffgebundener Dauermagnete im Montagespritzgießverfahren AmE 2011 - Automotive meets Electronics (Dortmund )In: AmE 2011 - Automotive meets Electronics 2011
Gardocki A. , Drummer D. :Improvement of the Stability of Polymer Bonded Rare-Earth-Magnets during the Injection Molding Process ANTEC (Boston, Massachusetts, USA , 1. Mai 2011 - 5. Mai 2011 )In: SPE Proceedings ANTEC 2011 2011
Gardocki A. , Drummer D. , Schmachtenberg E. :Improving the stability of magnetic fillers in plastics during processing In: GAK Gummi Fasern Kunststoffe 64 (2011 ), S. 219-223 ISSN: 0176-1625 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=79955133875&origin=inward
Gardocki A. , Drummer D. , Schmachtenberg E. :Verbesserung der Stabilität magnetischer Füllstoffe in Kunststoffen während der Verarbeitung In: GAK Gummi Fasern Kunststoffe 64 (2011 ), S. 219-223 ISSN: 0176-1625
Heinle C. , Heinle M. , Drummer D. :Innovative konstruktive und fertigungstechnische Möglichkeiten zur Kühlung von LEDs mit wärmeleitfähigen Kunststoffen Symposium Connectors (Lemgo )In: 3rd Symposium Connectors 2011
Heinle M. , Heinle C. , Drummer D. , Amesöder S. :Adhesive bonding between multi-material assembly injection molding parts with an adhesive interlayer In: Journal of Polymer Engineering 31 (2011 ), S. 539-548 ISSN: 0334-6447 DOI: 10.1515/POLYENG.2011.096
Hoffmann L. , Drummer D. , Müller T. :Fertigungsgerechte Gestaltung hochbelasteter Faserverbundbauteile für die Großserie 22. Technomer 2011 (Chemnitz )In: 22. Technomer 2011 2011
Hoffmann L. , Renn M. , Drummer D. , Müller T. :Hochbelastbare Faserverbundbauteile großserientauglich hergestellt In: Lightweight Design 4 (2011 ), S. 38-43 ISSN: 1865-4819
Hörber J. , Müller M. , Franke J. , Ranft F. , Heinle C. , Drummer D. :Assembly and Interconnection Technologies for MID based on Thermally Conductive Plastics for Heat Dissipation 34th International Spring Seminar on Electronics Technology (High Tatras Slovakia , 11. Mai 2011 - 15. Mai 2011 )In: 34th International Spring Seminar on Electronics Technology 2011 DOI: 10.1109/ISSE.2011.6053559
Hörber J. , Ranft F. , Müller M. , Franke J. , Drummer D. :Wärmeverteilung in elektronischen Baugruppen optimieren In: Elektronikpraxis - Profiline (2011 ), S. 74-76 ISSN: 0341-5589
Jungmeier A. , Drummer D. :Optimierungsstrategien für Mikrobauteile In: Kunststoffe 101 (2011 ), S. 62-65 ISSN: 0023-5563
Jungmeier A. , Drummer D. :Optimization Strategies for Micro Parts In: Kunststoffe International 101 (2011 ), S. 50-53 ISSN: 1862-4243
Jungmeier A. , Drummer D. , Kühnert I. :Dickwandige Kunststoffoptiken - Druckverfestigung als neues Verfahren für präzise Bauteile 2. VDI-Fachkonferenz: Kunststoffe in Optischen Systemen (Baden-Baden )In: Kunststoffe in Optischen Systemen 2011
Menacher M. , Drummer D. :Klebstoffvernetzung durch Vibrationstechnik In: Adhaesion Kleben und Dichten 55 (2011 ), S. 42-46 ISSN: 1619-1919
Menacher M. , Drummer D. :Vibrationsschweißen von strahlenvernetzten, technischen Thermoplasten PTS Technologie Seminar (Veserde-Wiblingwerde/Adelshofen )In: PTS Technologie Seminar 2011
Merken D. , Drummer D. :Montagespritzgegossene Überlastkupplungen - EJOtorque VDI-Technikforum: Kunststoffe in der Mechatronik (Fürth )In: Kunststoffe in der Mechatronik 2011
Merken D. , Drummer D. , Kobes M. , Künkel R. , Kornsteiner W. :Der richtige Dreh (Teil 3) - Auslegungsstrategie montagespritzgegossener Rutschkupplungen In: Zeitschrift Kunststofftechnik 7 (2011 ), S. 225-253 ISSN: 1864-2217
Merken D. , Drummer D. , Kobes M. , Künkel R. , Kornsteiner W. :The right turn (part 3) - design strategy for assembly injection moulded friction-clutches In: Zeitschrift Kunststofftechnik 7 (2011 ), S. 225-253 ISSN: 1864-2217 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=80755137035&origin=inward
Möhwald K. , Bach FW. , Drummer D. , Hopmann C. , Piotter V. , Fischer T. , Meister S. , Prehm J. , Prokop J. , Vetter K. :Die Forschergruppe 702: Maschinen-, Werkzeug- und Prozessentwicklung für neue Verfahren zur Herstellung von Mikrobauteilen über flüssige Phasen Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 (Karlsruhe , 11. Oktober 2011 - 12. Oktober 2011 )In: Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499 2011
Müller T. , Drummer D. :Highly Filled Polymers for Mechatronic Devices Smart Plastics Congress (Linz (A) )In: Smart Plastics Congress 2011
Müller T. , Drummer D. :Neue Prozessstrategien für Hybridstrukturen auf Basis faserverstärkter Thermoplaste Fachtagung Thermoplastische Faserverbundkunststoffe (Fürth )In: Thermoplastische Faserverbundkunststoffe 2011
Müller T. , Drummer D. :Spritzgießen mechanisch tragender Werkstoffverbunde VDI-Jahrestagung Spritzgießen 2011 (Baden-Baden )In: Spritzgießen 2011 2011
Ranft F. , Drummer D. :Effects of Masterbatch Dilution in Injection Moulding Machines on the Morphology and Electrical Properties of PA6/MWCNT Eurofillers 2011 (Dresden )In: Eurofillers 2011 2011
Ranft F. , Drummer D. :Einarbeitung nanoskaliger Füllstoffe in thermoplastische Matrices mittels Masterbatches 2. VDI-Fachkonferenz Kunststoffe in Optischen Systemen" (Baden-Baden )In: Kunststoffe in Optischen Systemen 2011
Ranft F. , Drummer D. :Optoelektronische Systeme auf Basis wärmeleitfähig modifizierter MIDs Workshop Innovative Anwendungen der MID-Technik (Stuttgart )In: Workshop Innovative Anwendungen der MID-Technik 2011
Ranft F. , Drummer D. , Hoffmann A. :Berücksichtigung temperaturabhängiger Stoffkennwerte bei der Auslegung optischer Systeme aus Kunststoff 2. VDI-Fachkonferenz "Kunststoffe in Optischen Systemen" (Baden-Baden )In: Kunststoffe in Optischen Systemen 2011
Rietzel D. , Aquite W. , Drummer D. , Osswald T. :Polymer powders for Selective Laser Sintering - Production and Characterization 44th Conference on Manufacturing Systems (Madison, WI )In: 44th Conference on Manufacturing Systems 2011
Rietzel D. , Drexler M. , Drummer D. :Grundlegende Betrachtungen zur Modellierung transienter thermischer Vorgänge beim selektiven Lasersintern von Thermoplasten In: RTejournal - Forum für Rapid Technologie 8 (2011 ), S. 1 ISSN: 1614-0923
Rietzel D. , Drexler M. , Kühnlein F. , Drummer D. :Influence of temperature fields on the processing of polymer powders by means of laser and mask sintering technology Twenty Second Annual International Solid Freeform Fabrication Symposium An Additive Manufacturing Conference (Austin , 8. August 2011 - 10. August 2011 )In: Twenty Second Annual International Solid Freeform Fabrication Symposium An Additive Manufacturing Conference 2011
Rietzel D. , Drummer D. :Grundlegende Betrachtungen zur Modellierung transienter thermischer Vorgänge beim selektiven Lasersintern von Thermoplasten Rapid.Tech 2011 (Erfurt )In: Tagungsband Rapid.Tech 2011 2011
Rudolph N. , Ehrenstein G. :High Dimensional Stability by Compression Induced Solidification The 1st Taishan Academic Forum / The 6th Qingdao International Rubber & Plastics Conference (Quindao )In: The 1st Taishan Academic Forum / The 6th Qingdao International Rubber & Plastics Conference 2011
Seefried A. , Drummer D. :Improved vacuum thermoforming of polyamide In: SPE Plastics Research Online (2011 ), S. 1-3 DOI: 10.1002/spepro.003969 URL: http://www.4spepro.org/view.php?source=003969-2011-12-7
Seefried A. , Drummer D. :The effect of high energy electron beam radiation on the thermoformability of Polyamide 12 films 11th Annual International Polymer Colloquium (Madison, WI )In: 11th Annual International Polymer Colloquium 2011
Seefried A. , Fuchs M. , Drummer D. , Schuck M. :Vernetzte, funktionalisierte Thermoplastfolien für mechatronische Anwendungen VDI-Technikforum: Kunststoffe in der Mechatronik (Fürth )In: Kunststoffe in der Mechatronik 2011
Tsigkopoulos T. , Seefried A. , Drummer D. , Weidinger P. , Bittermann J. :Auslegung langfaserverstärkter Thermoplastformteile In: Plastverarbeiter : neue Technologien, Kosteneffizienz, erhöhte Marktchancen 62 (2011 ), S. 160-163 ISSN: 0032-1338
Vogel J. , Grewell D. , Kessler MR. , Drummer D. , Menacher M. :Ultrasonic and Impulse Welding of Polylactic Acid Films In: Polymer Engineering and Science 51 (2011 ), S. 1059-1057 ISSN: 0032-3888 DOI: 10.1002/pen.21919
Wulfhorst J. , Seide G. , Gries T. , Rietzel D. , Drummer D. :Substitution of powders by ultrashort cut fibers for selective lasersintering (SLS) 11th world textile conference AUTEX (Mulhouse (F) )In: 11th world textile conference AUTEX 2011
2010
Drummer D. , Kühnlein F. , Rietzel D. , Hülder G. :Untersuchung der Materialalterung bei pulverbasierten Schichtbauverfahren In: RTejournal - Forum für Rapid Technologie 7 (2010 ), S. 1-5 ISSN: 1614-0923
Drummer D. , Müller T. :Thermoplastische Hochleistungsfaserverbunde stehen vor einer großen Renaissance In: Intelligenter Produzieren (2010 ), S. 6-8 ISSN: 1869-2745
Drummer D. , Reichart M. , Meister S. :Montagespritzgießen verbindet Metall und Thermoplast In: Maschinenmarkt 116 (2010 ), S. 34-36 ISSN: 0341-5775
Drummer D. , Rietzel D. , Kühnlein F. :Development of a characterization approach for the sintering behavior of new thermoplastics for selective laser sintering In: Physics Procedia 5 (2010 ), S. 533-542 ISSN: 1875-3892 DOI: 10.1016/j.phpro.2010.08.081
Drummer D. , Schmachtenberg E. , Hülder G. , Meister S. :MK2 - A novel assembly injection molding process for the combination of functional metal surfaces with polymer structures In: Journal of Materials Processing Technology 210 (2010 ), S. 1852-1857 ISSN: 0924-0136 DOI: 10.1016/j.jmatprotec.2010.06.020
Drummer D. , Seefried A. :Investigation of Thermoformability of E-Beam Cross Linked Polyamide 12 In: Zeitschrift Kunststofftechnik (2010 ), S. 292-315 ISSN: 1864-2217
Drummer D. , Seefried A. , Fuchs M. :Irradiation Opens up Third Film Dimension In: Kunststoffe International 100 (2010 ), S. 49 ISSN: 1862-4243
Drummer D. , Seefried A. , Fuchs M. :Strahlen öffnen dritte Foliendimension In: Kunststoffe 100 (2010 ), S. 55-59 ISSN: 0023-5563
Drummer D. , Vittinghoff J. , Hülder G. :Montagespritzguss piezoaktiver Sandwichverbunde In: Zeitschrift Kunststofftechnik 6 (2010 ), S. 165-190 ISSN: 1864-2217
Feulner R. , Brocka Z. , Seefried A. , Kobes M. , Hülder G. , Osswald T. :The effects of e-beam irradiation induced cross linking on the friction and wear of polyamide 66 in sliding contact. In: Wear 268 (2010 ), S. 905-910 ISSN: 0043-1648 DOI: 10.1016/j.wear.2009.12.025
Feulner R. , Kobes M. , Merken D. , Drummer D. :Determination and use of wear qualities based on model and component tests for the design of thermoplastic gears In: Tribologie und Schmierungstechnik 57 (2010 ), S. 9-20 ISSN: 0724-3472 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=77956924902&origin=inward
Feulner R. , Kobes M. , Merken D. , Drummer D. :Ermittlung und Anwendung von Verschleißkennwerten basierend auf Modell und Bauteilversuchen für die Auslegung von Getrieben aus Thermoplastkunststoffen In: Tribologie und Schmierungstechnik 57 (2010 ), S. 9-20 ISSN: 0724-3472
Fuchs M. , Drummer D. , Kilian A. , Schmidt LP. :Integration radarbasierter Fahrerassistenzsysteme in Kunststoffkarosserieteile Automotive meets Electronics (Dortmund , 15. April 2010 - 16. April 2010 )In: Automotive meets Electronics , Berlin : 2010
Heinle C. , Drummer D. :Potential of thermally conductive polymers for the cooling of mechatronic parts In: Physics Procedia 5 (2010 ), S. 735-744 ISSN: 1875-3892 DOI: 10.1016/j.phpro.2010.08.106
Heinle C. , Drummer D. :Wärmemanagement von LED mit wärmeleitfähigen Kunststoffen 1. VDI-Konferenz "Kunststoffe in optischen Systemen" (Erlangen )In: 1. VDI-Konferenz "Kunststoffe in optischen Systemen" 2010
Heinle C. , Heinle M. , Drummer D. , Ehrenstein G. :Assembly Molding of Tight Mechatronic System - A Model Approach In: Journal of Manufacturing Science and Engineering 132 (2010 ), S. 054505-1-054505-4 ISSN: 1087-1357 DOI: 10.1115/1.4002547
Hörber J. , Franke J. , Ranft F. , Heinle C. , Drummer D. :Thermisch leitfähige Kunststoffe für eine kostengünstige Fertigung und erweiterte Funktionalität in der MID‐Technologie In: PLUS - Produktion von Leiterplatten und Systemen (2010 ), S. 1-10
Jungmeier A. , Drummer D. , Ehrenstein G. :New Aspects of Process-Induced Properties of Micro Injection Molded Parts In: Plastics Rubber and Composites 39 (2010 ), S. 308-314 ISSN: 1465-8011
Jungmeier A. , Ehrenstein G. , Drummer D. :New aspects of process induced properties of microinjection moulded parts In: Plastics Rubber and Composites 39 (2010 ), S. 308-314 ISSN: 1465-8011 DOI: 10.1179/174328910X12691245470392
Kobes M. , Merken D. , Drummer D. :Tribologische Eigenschaften modifizierter Kunststoffe Tribologie- und Schmierstoffkongress GETLUB (Würzburg )In: Tribologie- und Schmierstoffkongress GETLUB 2010
Kühnlein F. , Rietzel D. , Drummer D. :Feasibility study of additive manufacturing of thermally conductive pa12 powders by selective mask sintering 68th Annual Technical Conference of the Society of Plastics Engineers 2010, ANTEC 2010 (Orlando, FL ) URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=77956676154&origin=inward
Merken D. , Kobes M. , Drummer D. :Mehr-Komponenten-Technologie steigert Leistungsfähigkeit von Kunststoffzahnrädern Tribologie- und Schmierstoffkongress GETLUB (Würzburg )In: Tribologie- und Schmierstoffkongress GETLUB 2010
Rietzel D. , Kühnlein F. , Drummer D. :Characterization of new thermoplastics for additive manufacturing by selective laser sintering 68th Annual Technical Conference of the Society of Plastics Engineers 2010, ANTEC 2010 (Orlando, FL ) URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=77956666230&origin=inward
Seefried A. , Drummer D. :Untersuchung der Thermoformbarkeit von elektronenstrahlvernetztem Polyamid 12 In: Zeitschrift Kunststofftechnik 6 (2010 ), S. 292-315 ISSN: 1864-2217
Wartzack S. , Drummer D. , Wittmann S. , Stuppy J. , Rietzel D. , Tremmel S. , Kühnlein F. :Besonderheiten bei der Auslegung und Gestaltung lasergesinterter Bauteile In: RTejournal - Forum für Rapid Technologie 7 (2010 ), S. - ISSN: 1614-0923
2009
Drummer D. :Tight material bonds within mechatronic systems by assembly moulding In: Zeitschrift Kunststofftechnik (2009 ), S. 427-450 ISSN: 1864-2217 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=77949286283∨igin=inward
Drummer D. , Fuchs M. :Innovative Automobilradaranwendungen durch Folientechnologie Technomer: 21. Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz , 12. November 2009 - 14. November 2009 )In: Technomer 2009
Drummer D. , Kühnlein F. , Rietzel D. :Funktionalisierte Bauteile durch Selektives Maskensintern In: RTejournal - Forum für Rapid Technologie 6 (2009 ), S. 1-5 ISSN: 1614-0923
Drummer D. , Rietzel D. , Kühnlein F. :Selektives Lasersintern von teilkristallinen Thermoplasten In: RTejournal - Forum für Rapid Technologie 6 (2009 ), S. 1-5 ISSN: 1614-0923
Fuchs M. , Drummer D. , Kilian A. , Schmidt LP. :Untersuchungen zur Eignung heißgeprägter Folien für die Integration von Antennen in Automotive-Exterieurbauteile In: Zeitschrift Kunststofftechnik 5 (2009 ), S. 385-410 ISSN: 1864-2217
Gardocki A. , Heinle C. , Drummer D. :Verbesserung der Stabilität kunststoffgebundener Selten-Erd Dauermagnete während der Verarbeitung und im Gebrauch 21. Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz )In: Technomer 2009
Heinle C. , Drummer D. , Ehrenstein G. :Thermally conductive modified polymers- Part 1: Experimental analysis and modelling description of a process dependent part property In: Zeitschrift Kunststofftechnik (2009 ), S. 338-358 ISSN: 1864-2217 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=70349538917&origin=inward
Heinle C. , Drummer D. , Ehrenstein G. :Wärmeleitfähig modifizierte Kunststoffe - Teil 1: experimentelle Analyse und Modellbeschreibung einer bauteil- und prozessabhängigen Materialeigenschaft In: Zeitschrift Kunststofftechnik 5 (2009 ), S. 338-358 ISSN: 1864-2217
Krippner S. , Feulner R. , Kobes M. , Hülder G. , Drummer D. :2K-Hochleistungszahnräder - Läuft wie geschmiert In: Kunststoffe 99 (2009 ), S. 38-42 ISSN: 0023-5563
Vetter K. , Kühnert I. , Hülder G. , Drummer D. :Einfluss der Prozesscharakteristik des Expansionsspritzgießens auf die Eigenschaften von Mikrobauteilen aus PP 21. Fachtagung über Verarbeitung und Anwendung von Polymeren (Chemnitz )In: Technomer 2009
2008
Al-Sheyyab A., Massimo Cojutti, Kägeler C., Detlev Staud, et al.:Flächige Leichtbauteile: Anwendungsmöglichkeiten im Automobilbau In: Konstruktion 60 (2008 ), S. 78-82 ISSN: 0720-5953
Amesöder S. , Feulner R. , Drummer D. , Künkel R. , Ehrenstein G. :Der richtige Dreh (Teil 1) - Kennwertermittlung für das Montagespritzgießen In: Zeitschrift Kunststofftechnik 4 (2008 ), S. 1-21 ISSN: 1864-2217
Eimeke S. , Gardocki A. , Drummer D. , Ehrenstein G. :Verarbeitungseinflüsse beim Spritzgießen multipolarer, kunststoffgebundener Dauermagnete In: Zeitschrift Kunststofftechnik 4 (2008 ), S. 1-33 ISSN: 1864-2217
Eimeke S. , Gardocki A. , Ehrenstein G. , Drummer D. :Effects during injection molding of polymer- bonded magnets with multipolar structure In: Zeitschrift Kunststofftechnik (2008 )ISSN: 1864-2217
2007
Al-Sheyyab A. , Blankl A. , Leitz KH. , Vogt U. , Weickmann J. , Wittmann S. :Qualitätsmanagement komplexer Verbundforschungsprojekte In: QZ Qualität und Zuverlässigkeit (2007 ), S. 46-47 ISSN: 0720-1214
Fuchs M. , Kilian A. , Brocka Z. , Schmachtenberg E. , Schmidt LP. :Karosserieaussenhaut mit integrierter Antenne In: Kunststoffe (2007 ), S. 56-63 ISSN: 0023-5563
Fuchs M. , Kilian A. , Brocka Z. , Schmachtenberg E. , Schmidt LP. :Outer Body Skin with an Integrated Antenna In: Kunststoffe International (2007 ), S. 26-30 ISSN: 1862-4243
Ziegler C. , Stockinger A. , Stoll T. , Wittmann S. , Weickmann J. , Schmidt J. , Topic I. , Schuck M. , Cojutti M. , Al-Sheyyab A. :Produktionsmanagement als effizientes Werkzeug zur Vernetzung von Forschungsprojekten In: Zeitschrift für wirtschaftlichen Fabrikbetrieb 110 (2007 ), S. 765-770 ISSN: 0932-0482 DOI: 10.3139/104.101215
2005
2004
2003
Amesöder S. , Fernandez L. , Niemann H. , Deventer R. , Ehrenstein G. :Werkstoff- und prozessoptimierte Herstellung flächiger Kunststoff-Kunststoff und Kunststoff-Metall-Verbundbauteile DFG Sonderforschungsbereich 396 Berichts- und Industriekolloqium 15./16. Oktober 2003 (Erlangen , 15. Oktober 2003 - 16. Oktober 2003 )In: Geiger Manfred, Ehrenstein Gottfried W. (Hrsg.): DFG Sonderforschungsbereich 396 Berichts- und Industriekolloqium 15./16. Oktober 2003 , Bamberg : 2003 URL: http://www5.informatik.uni-erlangen.de/Forschung/Publikationen/2003/Ehrenstein03-WUP.pdf
Dörfler R. , Drummer D. , Ehrenstein G. :Intelligent machine technology for flat, lightweight components In: Kunststoffe 93 (2003 ), S. 48-50 ISSN: 0023-5563 URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0038275781&origin=inward
2001
Eßer G. , Müller J. :Lasergestützte additive Leiterbilderzeugung In: Geiger, M.; Fleckenstein, M. (Hrsg.): Laser in der Elektronikproduktion & Feinwerktechnik - Tagungsband des 4. Erlanger Seminars LEF 2001 2001
Eßer G. , Müller J. :Produktionsentstehung eines ölstandssensors in MID-Technik: Vorteile der Laserstrukturierung In: Feldmann, K. (Hrsg.): Fachseminar - Innovative Produktgestaltung mit MID, 18.01. und 05.04. 2001
Huber A. , Müller J. , Meyer-Pittroff F. :Laserstrahljustieren als Innovation für die Montage von Mikrosystemen In: Idee-Vision-Innovation , 2001 , S. 275-286
Hüske M. , Kickelhain J. , Müller J. , Eßer G. :Laser supported activation and additive metallization of thermoplastics for 3D-MIDs In: Geiger, M.; Otto, A. (Hrsg.): Laser Assisted Net Shape Engineering 3 - Proceedings of the LANE 2001, Erlangen 28.-31.08 2001
Reindl L. , Ruppel CCW. , Berek S. , Knauer U. , Vossiek M. , Heide P. , Oreans L. :Design, fabrication, and application of precise SAW delay lines used in an FMCW radar system In: IEEE Transactions on Microwave Theory and Techniques 49 (2001 ), S. 787-794 ISSN: 0018-9480 DOI: 10.1109/22.915465
1998
Hassmann J. , Hahn CY. , Waldmann O. , Volz E. , Schleemilch HJ. , Hallschmid N. , Müller P. , Hanan GS. , Volkmer D. , Schubert US. , Lehn JM. , Mauser H. , Hirsch A. , Clark T. :Structural and electronic properties of self-assembled supramolecular grid structures: Doping of supramolecular thin films In: Materials Research Society Symposium - Proceedings 488 (1998 ), S. 447-452 ISSN: 0272-9172 URL: https://www.scopus.com/record/display.uri?eid=2-s2.0-17144462000&origin=inward
1996
Ansprechpartner
Matthias Lindbüchl (M.Sc. )