Papers / Proceedings

2025

• Detsch R., Schlicht S., Nawaz Q., Boccaccini AR., Drummer D.:
  Process-Dependent Variations in the Proliferation of Myoblasts, Fibroblasts and Chondrocytes on Laser-Sintered Polypropylene
  In: Journal of Biomedical Materials Research Part B: Applied Biomaterials 113 (2025)
  ISSN: 1552-4973
  DOI: 10.1002/jbm.b.35546
• Drummer D., Schlicht S.:
  Mechanisms, strategies and materials in support-free low temperature powder bed fusion
  ANTEC 2025 (Philadelphia, PA, 3. März 2025 - 6. März 2025)
• Roumeliotis P., Drummer D.:
  Ammonium polyphosphate and pentaerythritol as a flame-retardant system for polyamide 12 in selective laser sintering
  In: Progress in Additive Manufacturing (2025)
  ISSN: 2363-9512
  DOI: 10.1007/s40964-025-01071-y
• Roumeliotis P., Schlicht S., Drummer D.:
  Intumescent, catalyzed flame retardant systems for polyamide‐based powder bed fusion
  In: Journal of Vinyl & Additive Technology 31 (2025)
  ISSN: 1083-5601
  DOI: 10.1002/vnl.22212
• Rösel U., Drummer D.:
  Influence of Application Conditions on the Magnetic Properties of Recycled Polymer-Bonded Magnets Based on Thermoplastics and Ferrite-Based Fillers
  In: Recycling (2025)
  ISSN: 2313-4321
  DOI: 10.3390/recycling10010014
• Rösel U., Drummer D.:
  Prozess- und werkstoffbedingte Verarbeitungsgrenzen thermoplastisch amorpher Dünnwandbauteile
  VDI Fachtagung Spritzgießen
• Schlicht S., Wesinger M., Kaufmann A., Fischer D., Drummer D.:
  Multiscale polyethylene fiber – bacterial nanocellulose composites through combined laser fusion and bacterial in situ synthesis
  In: International Polymer Processing (2025)
  ISSN: 0930-777X
  DOI: 10.1515/ipp-2024-0158

2024

• Cholewa S., Forstner T., Drummer D.:
  β-Modification in heterogeneous polypropylene for laser-based powder bed fusion of polymers
  In: Progress in Additive Manufacturing (2024)
  ISSN: 2363-9512
  DOI: 10.1007/s40964-024-00672-3
  URL: https://rdcu.be/dJR4I
• Cholewa S., Jaksch A., Drummer D.:
  Polypropylene in laser-based powder bed fusion of polymers
  38th International Conference of the Polymer Processing Society (St. Gallen, 22. Mai 2023 - 26. Mai 2023)
  In: PROCEEDINGS OF THE 38TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (PPS-38) 2024
  DOI: 10.1063/5.0204599
• Cholewa S., Jaksch A., Drummer D.:
  Tailored Microstructure in Laser-Based Powder Bed Fusion of Polymers
  SPE Annual Technical Conference and Exhibition, ANTEC 2024 (St. Louis, MO, USA, 4. März 2024 - 7. März 2024)
  In: Annual Technical Conference - ANTEC, Conference Proceedings 2024
• Forstner T., Cholewa S., Drummer D.:
  Enhanced Feedstock Processability for the Indirect Additive Manufacturing of Metals by Material Extrusion through Ethylene–Propylene Copolymer Modification
  In: Polymers 16 (2024), Art.Nr.: 2658
  ISSN: 2073-4360
  DOI: 10.3390/polym16182658
  URL: https://www.mdpi.com/2073-4360/16/18/2658/pdf
• Forstner T., Cholewa S., Drummer D.:
  Influence of wax addition on feedstock processing behavior in additive manufacturing of metals by material extrusion
  In: Progress in Additive Manufacturing (2024)
  ISSN: 2363-9512
  DOI: 10.1007/s40964-024-00671-4
  URL: https://rdcu.be/dID9h
• Forstner T., Drummer D.:
  Continuous production of cellular ceramics through thermoplastic foam extrusion
  SPE ANTEC 2024 (St. Louis, Missouri, 4. März 2024 - 7. März 2024)
• Forstner T., Drummer D.:
  Understanding chemical foaming of highly filled ceramic feedstocks for injection molding
  38th International Conference of the Polymer Processing Society (St. Gallen, 22. Mai 2023 - 26. Mai 2023)
  In: PROCEEDINGS OF THE 38TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (PPS-38) 2024
  DOI: 10.1063/5.0204509
• Jaksch A., Cholewa S., Drummer D.:
  Impact of Layer Time and Hatch Conformity on the Behavior of Thin-Walled Components in Powder Bed Fusion of Polymers
  38th International Conference of the Polymer Processing Society, PPS 2023 (St. Gallen, 22. Mai 2023 - 26. Mai 2023)
  In: Edith Perret (Hrsg.): AIP Conference Proceedings 2024
  DOI: 10.1063/5.0204486
• Kaufmann A., Schlicht S., Rösel U., Drummer D.:
  Adhesion‐controlled anisotropic rotational molding of multilayered ultrasoft silicone films
  In: Polymer Engineering and Science (2024)
  ISSN: 0032-3888
  DOI: 10.1002/pen.26869
• Li S., Wu W., Drummer D., Tomiak F., Wang Y., Lu Z., Zhao X.:
  Copper Modified Boron Nitride And Graphene Combined To Self-Assemble Three-Dimensional Thermal Conductivity Framework to Improve the Thermal Conductivity of Epoxy Resin
  In: Applied Composite Materials (2024)
  ISSN: 0929-189X
  DOI: 10.1007/s10443-023-10195-9
• Lindbüchl M., Drummer D.:
  Local integration of electrically conductive paths using an in situ x-y positioning system in selective laser sintering
  38th International Conference of the Polymer Processing Society, PPS 2023 (St. Gallen, CHE, 22. Mai 2023 - 26. Mai 2023)
  In: Edith Perret (Hrsg.): AIP Conference Proceedings 2024
  DOI: 10.1063/5.0207104
• Ma Z., Jiang B., Drummer D., Zhang L.:
  Composite electroforming of precision Ni-P-PTFE mold inserts with low internal stress and self-lubricating properties
  In: Surface & Coatings Technology 494 (2024), Art.Nr.: 131488
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2024.131488
• Ma Z., Jiang B., Drummer D., Zhang L.:
  Influence of phosphorous acid concentration on the self-lubricating properties of electroformed Ni-P-PTFE ternary composites
  In: Surface & Coatings Technology 477 (2024), Art.Nr.: 130375
  ISSN: 0257-8972
  DOI: 10.1016/j.surfcoat.2024.130375
• Popp J., Drummer D.:
  Influence of the Textile Reinforcement on the Joint Formation of Pin-Joined Composite/Metal Parts
  In: Applied Composite Materials (2024)
  ISSN: 0929-189X
  DOI: 10.1007/s10443-024-10203-6#citeas
• Popp J., Drummer D.:
  Investigation of different process routes for joining thermoplastic composite/steel joints via the embedding of cold formed metallic pin structures
  In: Journal of Advanced Joining Processes 10 (2024), Art.Nr.: 100271
  ISSN: 2666-3309
  DOI: 10.1016/j.jajp.2024.100271
• Romeis M., Ehrngruber M., Drummer D.:
  Investigation of the effects of energy density in Laser Sintering of polypropylene on morphological and dielectric properties for high-frequency antennas
  13th CIRP Conference on Photonic Technologies, LANE 2024 (Furth, DEU, 15. September 2024 - 19. September 2024)
  In: Michael Schmidt, C.B. Arnold, K. Wudy (Hrsg.): Procedia CIRP 2024
  DOI: 10.1016/j.procir.2024.08.112
• Romeis M., Ehrngruber M., Drummer D.:
  Laser-Sintering of Cyclic Olefine Copolymer for Low Dielectric Loss Applications
  In: Polymers 16 (2024), Art.Nr.: 1751
  ISSN: 2073-4360
  DOI: 10.3390/polym16121751
• Rothammer B., Feile K., Werner S., Frank R., Bartz M., Wartzack S., Schubert DW., Drummer D., Detsch R., Wang B., Rosenkranz A., Marian M.:
  Ti3C2Tx-UHMWPE nanocomposites—Towards an enhanced wear-resistance of biomedical implants
  In: Journal of Biomedical Materials Research Part A (2024), S. 1 -15
  ISSN: 1549-3296
  DOI: 10.1002/jbm.a.37819
• Rösel U., Drummer D.:
  Changes in Material Behavior according to the Amount of Recycled Magnetic Materials in Polymer-Bonded Magnets Based on Thermoplastics
  In: Magnetism 4 (2024), S. 1-23
  ISSN: 2673-8724
  DOI: 10.org./10.3390/magnetism4010001
• Rösel U., Drummer D.:
  Evaluation of a Recycling Strategy for Polymer-Bonded Magnets Based on Thermosets
  In: Recycling 9 (2024), S. 81
  ISSN: 2313-4321
  DOI: 10.3390/recycling9050081
• Rösel U., Drummer D.:
  Influence of Different Filler Systems on the Thermal Conductivity and Mechanical Properties of Thermosets
  In: Polymers 16 (2024), S. 2917
  ISSN: 2073-4360
  DOI: 10.3390/polym16202917
• Rösel U., Drummer D.:
  The Influence of the Design and Technological Parameters of Polymer-Based Multipolar Magnets with SrFeO Hard Magnetic Filler on the Residual Magnetic Properties
  In: Magnetism (2024)
  ISSN: 2673-8724
  DOI: 10.3390/magnetism4030011
• Schlicht S., Campbell JC., Weber AC., Westhoff J., Volodkin D., Fischer D., Drummer D., Vikulina A.:
  Vaterite-based in situ surface modification and process-dependent biocompatibility of laser sintered polypropylene
  In: Journal of Materials Research and Technology (2024)
  ISSN: 2238-7854
  DOI: 10.1016/j.jmrt.2024.08.112
• Schlicht S., Detsch R., Nawaz Q., Boccaccini AR., Drummer D.:
  Process- and topography-related cell viability on laser sintered polypropylene
  8th China-Europe Symposium on Biomaterials in Regenerative Medicine (Nürnberg, 15. September 2024 - 18. September 2024)
• Schlicht S., Drummer D.:
  Geometry-induced process and part characteristics in support-free powder bed fusion of polypropylene at room temperature
  In: Progress in Additive Manufacturing 9 (2024)
  ISSN: 2363-9512
  DOI: 10.1007/s40964-024-00656-3
• Schlicht S., Drummer D.:
  Laser-Based Additive Manufacturing of Polypropylene-Agarose Composites: Processing Properties and Compressive Mechanical Properties
  38th International Conference of the Polymer Processing Society (St. Gallen, 22. Mai 2023 - 26. Mai 2023)
  In: Proceedings of the 38th International Conference of the Polymer Processing Society (PPS-38), College Park, Maryland: 2024
  DOI: 10.1063/5.0204523
• Schlicht S., Drummer D.:
  Layer-dependent temperature evolution and cooling kinetics in non-isothermal Powder Bed Fusion of polypropylene
  In: Procedia CIRP 124 (2024), S. 261-264
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2024.08.113
• Schlicht S., Gabriel C., Drummer D.:
  Low temperature powder bed fusion of polyamide 6: transient process characteristics and process-dependent part properties
  In: Progress in Additive Manufacturing (2024)
  ISSN: 2363-9512
  DOI: 10.1007/s40964-024-00812-9
• Schlicht S., Kaufmann A., Kleffel T., Drummer D.:
  Biomechanische Metamaterialien – Prozesse, Möglichkeiten und Perspektiven
  38. Engelberger Kunststofftechnisches Seminar 2024 (Engelberg, 9. März 2024 - 14. März 2024)
• Schlicht S., Kaufmann A., Tur B., Kniesburges S., Drummer D.:
  Highly dynamic rotational molding of thin-walled larynx models for fluid dynamic modelling
  13th International Conference on Voice Physiology and Biomechanics (Erlangen, 22. Juli 2024 - 26. Juli 2024)
  In: Proceedings of the 13th International Conference on Voice Physiology and Biomechanics 2024
• Schlicht S., Wesinger M., Kaufmann A., Rösel U., Fischer D., Drummer D.:
  Multiscale polyethylene fiber - nanocellulose fiber composites through laser fusion and bacterial in situ synthesis
  Conference of the Polymer Processing Society 2024 (Ferrol, 30. September 2024 - 3. Oktober 2024)
• Semmler M., Eckhardt M., Heinrich A., Tur B., Wolfsteiner S., Schlicht S., Drummer D., Wendler O., Döllinger M.:
  Rheological Analysis of Saliva Samples and its Influence on Voice Quality in Ectodermal Dysplasia
  29th Congress of the European Society of Biomechanics (Edinburgh, 29. Juni 2024 - 3. Juli 2024)
• Tischer F., Cholewa S., Groppe P., Granath T., Düsenberg B., Mandel K., Drummer D., Bück A., Peukert W., Schmidt J.:
  Magnetic polyamide 11 powder for the powder bed fusion process by liquid-liquid phase separation and crystallization
  In: Additive Manufacturing 88 (2024), Art.Nr.: 104250
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2024.104250
• Tur B., Gühring L., Wendler O., Schlicht S., Drummer D., Schützenberger A., Kniesburges S.:
  Vibratory Response of an Adaptive Synthetic Larynx Model
  13th International Conference on Voice Physiology and Biomechanics (Erlangen, 22. Juli 2024 - 26. Juli 2024)
  In: Proceedings of the 13th International Conference on Voice Physiology and Biomechanics 2024
• Zhang L., Yang D., Ma Z., Deng Z., Li Z., Drummer D., Jiang B.:
  Pulse current electroforming of Ni-PTFE nanocomposite mold insert with long-lifetime and anti-adhesive properties
  In: Electrochimica Acta 491 (2024), Art.Nr.: 144308
  ISSN: 0013-4686
  DOI: 10.1016/j.electacta.2024.144308
• Zhao X., Wu W., Drummer D., Wang Y., Liu C., Li S., Lu Z.:
  Interlayer growth of SiC nanowires in graphene aerogel for thermal conductivity enhancement of epoxy resin and its mechanism
  In: Polymer Composites 45 (2024), S. 4513-4523
  DOI: 10.1002/pc.28077

2023

• Baumgärtner B., Rothfelder R., Greiner S., Breuning C., Renner J., Schmidt M., Drummer D., Körner C., Markl M., Hausotte T.:
  Evaluation of Additively-Manufactured Internal Geometrical Features Using X-ray-Computed Tomography
  In: Journal of Manufacturing and Materials Processing (2023)
  ISSN: 2504-4494
  DOI: 10.3390/jmmp7030095
• Cholewa S., Jaksch A., Drummer D.:
  Analysis of Flow Additives in Laser-Based Powder Bed Fusion of Polymers: Implications for Flow Behavior, Processing, Temperature Profile, and Part Characteristics
  Solid Freeform Fabrication 2023: Proceeding of the 34th Annual International Solid Freeform Fabrication Symposium
• Cholewa S., Jaksch A., Drummer D.:
  Flame-retardant Polyamide 6 for Powder Bed Fusion of Polymers
  Rapid.Tech 3D (Erfurt, 9. Mai 2023 - 11. Mai 2023)
  In: Michael Kynast, Michael Eichmann, Gerd Witt (Hrsg.): Proceedings of the 19th Rapid.Tech 3D Conference 2023
• Cholewa S., Jaksch A., Drummer D.:
  Structure Development of Semi-crystalline Polymers in Laser Based Powder Bed Fusion
  Antec 2023 (Denver, Colorado, 27. März 2023 - 30. März 2023)
• Cholewa S., Stieglitz L., Jaksch A., Rieger B., Drummer D.:
  Tailored Syndiotactic Polypropylene Feedstock Material for Laser-Based Powder Bed Fusion of Polymers: Material Development and Processability
  In: ACS Applied Polymer Materials (2023)
  ISSN: 2637-6105
  DOI: 10.1021/acsapm.2c02112
• Dong Y., Jiang B., Drummer D., Zhang L.:
  Mass transfer characteristics at cathode/electrolyte interface during electrodeposition of nickel microcolumns with various aspect ratios
  In: Journal of Micromechanics and Microengineering 33 (2023), Art.Nr.: 105007
  ISSN: 0960-1317
  DOI: 10.1088/1361-6439/acee8a
• Dong Y., Jiang B., Qiang J., Ma Z., Drummer D., Zhang L.:
  Tuning formation process of void defects in microcolumn arrays via pulse reverse electrodeposition
  In: Journal of Materials Research and Technology 24 (2023), S. 3055-3066
  ISSN: 2238-7854
  DOI: 10.1016/j.jmrt.2023.03.201
• Drummer D., Schlicht S., Greiner S.:
  Additive Manufacturing of Functionalized Material Systems for Medical Applications: Potentials and Challenges in Additive Manufacturing
  8th International Conference on Additive Technologies iCAT 2023 (Maribor, Slowenien, 19. April 2023 - 22. April 2023)
  In: Additive Manufacturing in Multidisciplinary Cooperation and Production, Cham: 2023
  DOI: 10.1007/978-3-031-37671-9_23
• Frank R., Drummer D.:
  Influence of Tailored Blend Morphology on Resulting Dielectric Properties in PP-Cast Film
  2023 IEEE Conference on Electrical Insulation and Dielectric Phenomena, CEIDP 2023 (East Rutherford, NJ, USA, 15. Oktober 2023 - 19. Oktober 2023)
  In: Annual Report - Conference on Electrical Insulation and Dielectric Phenomena, CEIDP 2023
  DOI: 10.1109/CEIDP51414.2023.10410562
• Frank R., Wittmann LM., Kleffel T., Roth B., Graichen K., Drummer D.:
  Investigating the Integration of Nonwoven Carbon Fibers for Mechanical Enhancement in Compression Molded Fiber-Reinforced Polymer Bipolar Plates
  In: Polymers 15 (2023), Art.Nr.: 3891
  ISSN: 2073-4360
  DOI: 10.3390/polym15193891
• Greiner S., Schlicht S., Drummer D.:
  Understanding geometry dependent temperature fields in laser powder bed fusion of PA12 by means of infrared thermal imaging
  8th International Conference on Additive Technologies iCAT (Maribor, Slowenien, 19. April 2023 - 22. April 2023)
  In: Additive Manufacturing in Multidisciplinary Cooperation and Production, Cham: 2023
  DOI: 10.1007/978-3-031-37671-9_2
• Herzog C., Drummer D.:
  Influence of the injection molding process on the tooth deflection of plastic gears during operation
  DOI: 10.51202/9783181024225-1435
• Herzog C., Drummer D.:
  Influence of the injection molding process on the tooth deflection of plastic gears during operation
  5th International Conference on High Performance Plastic Gears 2023 (Garching/ Munich, 13. September 2023 - 15. September 2023)
  DOI: 10.51202/9783181024225-1435
• Herzog C., Drummer D.:
  Limitations of the Check Calculation for Tooth Deformation of Plastic Gears According to Gear Design Guideline VDI 2736
  In: Polymers 15 (2023)
  ISSN: 2073-4360
  DOI: 10.3390/polym15183809
• Herzog C., Drummer D.:
  Test Rig for The In Situ Measurement of The Elastic Tooth Deflection of Plastic Gears
  In: Polymers 15 (2023), Art.Nr.: 1732
  ISSN: 2073-4360
  DOI: 10.3390/polym15071732
• Hesse N., Jaksch A., Kaschta J., Groh D., Drummer D., Peukert W., Schmidt J.:
  From trash to treasure in additive manufacturing: Recycling of polymer powders by acid catalyzed hydrolysis
  In: Additive Manufacturing 71 (2023), Art.Nr.: 103591
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2023.103591
• Jaksch A., Cholewa S., Drummer D.:
  Enhancing the Thermal Stability of Polyamide 6 in Powder Bed Fusion via Primary and Secondary Antioxidant Incorporation
  Solid Freeform Fabrication 2023: Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference
• Jaksch A., Cholewa S., Drummer D.:
  Thin-Walled Part Properties in Powder Bed Fusion of Polymers—A Comparative Study on Temperature Development and Part Performance Depending on Part Thickness and Orientation
  In: Journal of Manufacturing and Materials Processing 7 (2023), Art.Nr.: 96
  ISSN: 2504-4494
  DOI: 10.3390/jmmp7030096
• Jiang B., Dong Y., Qiang J., Drummer D., ZHANGa L.:
  Effect of ion mass transfer and electric field distribution on the formation of void defect in electroformed nickel microcolumns
  In: Electrochemistry 91 (2023), Art.Nr.: 087002
  ISSN: 1344-3542
  DOI: 10.5796/electrochemistry.23-00058
• Köhler D., Popp J., Kupfer R., Troschitz J., Drummer D., Gude M.:
  In-Situ Computed Tomography - Analysis of a Single-Lap Shear Test with Composite-Metal Pin Joints
  12th International Conference on Innovation in Aviation and Space for Opening New Horizons, EASN 2022 (Barcelona, ESP, 18. Oktober 2022 - 21. Oktober 2022)
  In: Journal of Physics: Conference Series 2023
  DOI: 10.1088/1742-6596/2526/1/012067
• Li S., Wu W., Drummer D., Wang Y., Lu Z., Zhao X.:
  Copper and graphene work together to construct a three-dimensional skeleton thermal conductivity network to improve the thermal conductivity of the epoxy resin
  In: Polymer Composites (2023)
  DOI: 10.1002/pc.27494
• Lotter S., Brand L., Jamali V., Schäfer M., Loos H., Unterweger H., Greiner S., Kirchner J., Alexiou C., Drummer D., Fischer G., Büttner A., Schober R.:
  Experimental Research in Synthetic Molecular Communications - Part I
  In: IEEE Nanotechnology Magazine (2023), S. 1-12
  ISSN: 1942-7808
  DOI: 10.1109/MNANO.2023.3262100
• Lotter S., Brand L., Jamali V., Schäfer M., Loos HM., Unterweger H., Greiner S., Kirchner J., Alexiou C., Drummer D., Fischer G., Büttner A., Schober R.:
  Experimental Research in Synthetic Molecular Communications - Part II
  In: IEEE Nanotechnology Magazine (2023), S. 1-12
  ISSN: 1942-7808
  DOI: 10.1109/MNANO.2023.3262377
• Lu Z., Wu W., Drummer D., Wang Y., Liu C., Li S., Zhao X.:
  ZnO nanowire-decorated Al2O3/graphene aerogel for improving the thermal conductivity of epoxy composites
  In: Polymer Composites (2023)
  DOI: 10.1002/pc.27313
• Ma Z., Jiang B., Dong Y., Qiang J., Drummer D., Zhang L.:
  Electrodeposition model with dynamic ion diffusion coefficients for predicting void defects in electroformed microcolumn arrays
  In: Physical Chemistry Chemical Physics (2023)
  ISSN: 1463-9076
  DOI: 10.1039/d2cp05396a
• Marschall M., Cholewa S., Kopp SP., Drummer D., Schmidt M.:
  Holistic Characterization of PBF-LB/P Powder Regarding Isothermal Crystallization, Rheology and Optical Properties Under Process Conditions
  In: Igor Drstvensek, Snehashis Pal, Nataša Ihan Hren (Hrsg.): Additive Manufacturing in Multidisciplinary Cooperation and Production, Cham: Springer, 2023, S. 43-52
  ISBN: 9783031376702
  DOI: 10.1007/978-3-031-37671-9_5
• Natale R., Drummer D.:
  Improving the optical properties of achromatic lenses due to the process conditions
  Scholars 2nd Edition International Conference on Optics, Lasers and Photonics. 2023 (London)
• Popp J., Busch M., Hausotte T., Drummer D.:
  Fiber Orientation in continuous fiber reinforced thermoplastics/metal hybrid joining via multi-pin arrays
  In: Science and Engineering of Composite Materials 30 (2023)
  ISSN: 0334-181X
  DOI: 10.1515/secm-2022-0165
  URL: https://www.degruyter.com/document/doi/10.1515/secm-2022-0165/html
• Popp J., Wolf M., Drummer D.:
  Fügen thermoplastischer Faserverbunde über Pin-Strukturen mit variablen Prozessrouten
  In: Werkstoffe in der Fertigung (2023)
  ISSN: 0939-2629
• Popp J., Zirngibl C., Schleich B., Wartzack S., Drummer D.:
  Influence of geometrical parameters of conic pin structures in thermoplastic composite/steel hybrid joining
  20th International Conference on Sheet Metal, SHEMET 2023 (Erlangen, DEU, 2. April 2023 - 5. April 2023)
  In: Marion Merklein, Hinnerk Hagenah, Joost R. Duflou, Livan Fratini, Fabrizio Micari, Paulo Martins, Gerson Meschut (Hrsg.): Materials Research Proceedings 2023
  DOI: 10.21741/9781644902417-15
• Qiang J., Jiang B., Dong Y., Yang L., Drummer D., Zhang L.:
  Tuning residual stress in electrodeposited nickel films via pulse current
  In: Surfaces and Interfaces 40 (2023), Art.Nr.: 103038
  ISSN: 2468-0230
  DOI: 10.1016/j.surfin.2023.103038
• Romeis M., Ehrngruber M., Drummer D.:
  Prozessabhängigkeit der dielektrischen Eigenschaften im FFF von COC
  28. Tech­no­mer Chem­nitz 2023 (Chemnitz, 9. November 2023 - 10. November 2023)
  In: Tagungsband Technomer: 2023
• Rösel U., Drummer D.:
  Correlation between the Material System and the Magnetic Properties in Thermoset-Based Multipolar Ring Magnets
  In: Magnetism 3 (2023), S. 226-244
  ISSN: 2673-8724
  DOI: 10.3390/magnetism3030018
• Rösel U., Drummer D.:
  Extension of the Application Range of Multipolar Bonded Ring Magnets by Thermosets in Comparison to Thermoplastics
  In: Magnetism 3 (2023), S. 71-89
  ISSN: 2673-8724
  DOI: 10.3390/magnetism3010007
• Rösel U., Drummer D.:
  Rotor-integrierte Dauermagnete – Spritzguss in der Antriebstechnik
  VDI Fachtagung Spritzgießen
• Rösel U., Kneidl M., Franke J., Drummer D.:
  Improving the integrated fabrication of insulation systems in electric drives by injection molding of thermosets due to processing conditions and slot design
  In: Polymers (2023), S. 1-20
  ISSN: 2073-4360
  DOI: 10.3390/polym15051165
• Schellenberger A., Belli R., Karsten J., Lohbauer U.:
  On the robustness of the Single-Edge-Precracked-Beam (SEPB) method for fracture toughness testing of ceramic materials
  In: Engineering Fracture Mechanics 291 (2023), Art.Nr.: 109527
  ISSN: 0013-7944
  DOI: 10.1016/j.engfracmech.2023.109527
• Schlicht S., Cholewa S., Drummer D.:
  Process-Structure-Property Interdependencies in Non-Isothermal Powder Bed Fusion of Polyamide 12
  In: Journal of Manufacturing and Materials Processing 7 (2023), Art.Nr.: 33
  ISSN: 2504-4494
  DOI: 10.3390/jmmp7010033
• Schlicht S., Drummer D.:
  Accelerated Powder Bed Fusion of Polypropylene Using Superposed Fractal Exposure Strategies
  8th International Conference on Additive Technologies (Maribor, 19. April 2023 - 22. April 2023)
  In: Additive Manufacturing in Multidisciplinary Cooperation and Production 2023
  DOI: 10.1007/978-3-031-37671-9_1
• Schlicht S., Drummer D.:
  Eutectic In Situ Modification of Polyamide 12 Processed through Laser-Based Powder Bed Fusion
  In: Materials 16 (2023), Art.Nr.: 2050
  ISSN: 1996-1944
  DOI: 10.3390/ma16052050
• Schlicht S., Drummer D.:
  Thermal Intra-Layer Interaction of Discretized Fractal Exposure Strategies in Non-Isothermal Powder Bed Fusion of Polypropylene
  EMPOrIA - International Joint Conference 2023 (Aachen, 16. Mai 2023 - 17. Mai 2023)
  DOI: 10.3390/jmmp7020063
• Schlicht S., Drummer D.:
  Thermal Intra-Layer Interaction of Discretized Fractal Exposure Strategies in Non-Isothermal Powder Bed Fusion of Polypropylene
  In: Journal of Manufacturing and Materials Processing 7 (2023), Art.Nr.: 63
  ISSN: 2504-4494
  DOI: 10.3390/jmmp7020063
• Schneider K., Kleffel T., Drummer D.:
  RF Welding of Dielectric Lossless Foam Particles by the Application of a Dielectric Heatable Coating with High Recycling Potential
  In: Polymers 15 (2023), Art.Nr.: 3950
  ISSN: 2073-4360
  DOI: 10.3390/polym15193950
• Schubert D., Rohrmoser A., Herzog C., Wolf M., Hagenah H., Merklein M., Drummer D.:
  Influence of production process-induced surface topologies at varying roughness depths on the tribological properties of polyamide steel contact
  In: Journal of Polymer Engineering 43 (2023), S. 187-197
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2022-0231
• Schubert D., Wolf M., Drummer D.:
  Interaction of tool and process design on the mechanical and tribological behaviour of an injection-moulded polyamide-steel gear set
  In: Polymer Testing (2023), S. 107982
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2023.107982
• Tischer F., Cholewa S., Düsenberg B., Drummer D., Peukert W., Schmidt J.:
  Polyamide 11 nanocomposite feedstocks for powder bed fusion via liquid-liquid phase separation and crystallization
  In: Powder Technology 424 (2023), Art.Nr.: 118563
  ISSN: 0032-5910
  DOI: 10.1016/j.powtec.2023.118563
• Tomiak F., Zitzmann M., Drummer D.:
  A Multi-Material Flame-Retarding System Based on Expandable Graphite for Glass-Fiber-Reinforced PA6
  In: Polymers 15 (2023), Art.Nr.: 4100
  ISSN: 2073-4360
  DOI: 10.3390/polym15204100
• Tur B., Gühring L., Wendler O., Schlicht S., Drummer D., Kniesburges S.:
  Effect of Ligament Fibers on Dynamics of Synthetic, Self-Oscillating Vocal Folds in a Biomimetic Larynx Model
  In: Bioengineering 10 (2023), Art.Nr.: 1130
  ISSN: 2306-5354
  DOI: 10.3390/bioengineering10101130
• Wagemann P., Wolf M., Drummer D.:
  Vibration welding of crosslinked polyethylene
  In: Joining Plastics - Fügen von Kunststoffen 17 (2023), S. 166-173
  ISSN: 1864-3450
• Werner J., Drummer D.:
  Influence of particle geometry and size on the cell morphology of vacuum assisted rotationally molded foam
  In: Cellular Polymers Online First (2023)
  ISSN: 0262-4893
  DOI: 10.1177/02624893231171662
  URL: https://journals.sagepub.com/doi/10.1177/02624893231171662
• Wolf M., Drummer D.:
  Structure formation in pin-like joining using vibration welding technology
  In: Journal of Advanced Joining Processes (2023), S. 100158
  ISSN: 2666-3309
  DOI: 10.1016/j.jajp.2023.100158
• Wolf M., Drummer D.:
  Structuring step dependent characteristics in joining using pin-like structures in the vibration welding process
  In: International Polymer Processing (2023)
  ISSN: 0930-777X
  DOI: 10.1515/ipp-2023-4419
• Wolf M., Drummer D.:
  Verformung pinartiger Strukturen im Fügeprozess zur Erzeugung formschlüssiger Multimaterialverbindungen
  In: Joining Plastics - Fügen von Kunststoffen 17 (2023)
  ISSN: 1864-3450
• Wolf M., Kleffel T., Drummer D.:
  Functionalization of series components by joining laser-sintered with injection-molded parts: Weld seam characteristics in vibration welding
  In: Composites and Advanced Materials 32 (2023)
  ISSN: 2634-9833
  DOI: 10.1177/26349833231165320
• Yuan S., Zhou M., Liu X., Li Q., Drummer D., Jiang B.:
  Investigation of parameters and porous plug enhanced enrichment with field-amplified sample stacking in microchip
  In: Physics of Fluids 35 (2023)
  ISSN: 1070-6631
  DOI: 10.1063/5.0135314
• Zhao X., Wu W., Drummer D., Wang Y., Cui S., Liu C., Lu Z., Li S., Chen Q.:
  SiC Nanowires Bridged Graphene Aerogels with a Vertically Aligned Structure for Highly Thermal Conductive Epoxy Resin Composites and Their Mechanism
  In: ACS Applied Electronic Materials (2023)
  ISSN: 2637-6113
  DOI: 10.1021/acsaelm.3c00015

2022

• Amesöder S., Ehrenstein G.:
  Thermisch leitfahig modifizierte Funktionskunststoffe
  In: International Journal of Materials Research 94 (2022), S. 606-609
  ISSN: 1862-5282
  DOI: 10.1515/ijmr-2003-0105
• Cholewa S., Drummer D.:
  Crystallization behavior under process conditions in Powder Bed Fusion of polymers
  12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, DEU, 4. September 2022 - 8. September 2022)
  In: M. Schmidt, F. Vollertsen, B.M. Colosimo (Hrsg.): Procedia CIRP 2022
  DOI: 10.1016/j.procir.2022.08.108
• Cholewa S., Drummer D.:
  Prozessnahe simultane Bestimmung des Kristallisations- und Fließverhaltens von PA 12 im Lasersintern
  Rapid.Tech 3D Druck (Erfurt, 17. Mai 2022 - 19. Mai 2022)
  DOI: 10.3139/9783446475281.004
• Cholewa S., Jaksch A., Drummer D.:
  Coalescence behavior of polyamide 12 as function of zero-shear viscosity and influence on mechanical performance
  SFF 2022 (Austin, Texas, 25. Juli 2022 - 27. Juli 2022)
• Drummer D., Greiner S., Grützmacher C., Jiang F., Kleffel T., Romeis M., Schlicht S., Wolf M.:
  Neue Werkstoffe und Prozesse für die additive Fertigung
  In: Jahresmagazin Ingenieurwissenschaften (2022)
  ISSN: 1618-8357
  Open Access: https://www.wak-kunststofftechnik.de/fileadmin/downloads/7_ueber-uns/Jahresmagazin_Kunststofftechnik_2022.pdf
• Fu L., Zhang M., Zhai Z., Jiang F.:
  The influence of preheating temperature on the mechanical properties of injection-overmolded hybrid glass fiber reinforced thermoplastic composites
  In: Polymer Testing 105 (2022)
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2021.107425
• Greiner S., Drummer D.:
  Understanding aspect ratio effects in Laser Powder Bed Fusion of polyamide 12 by means of infrared thermal imaging
  12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, 4. September 2022 - 8. September 2022)
  In: M. Schmidt, F. Vollertsen, B.M. Colosimo (Hrsg.): Procedia CIRP 2022
  DOI: 10.1016/j.procir.2022.08.060
• Herzog C., Wolf M., Drummer D.:
  In Situ Measured Tooth Flank Wear of Plastic Gears under Spectrum Loading
  In: Polymers 14 (2022), S. 5239
  ISSN: 2073-4360
  DOI: 10.3390/polym14235239
• Herzog C., Wolf M., Schubert D., Drummer D.:
  In situ investigation of the influence of varying load conditions on tooth deformation and wear of polymer gears
  In: Forschung Im Ingenieurwesen-Engineering Research (2022)
  ISSN: 0015-7899
  DOI: 10.1007/s10010-022-00591-1
• Jaksch A., Cholewa S., Drummer D.:
  Understanding geometry dependent part behavior of thin walled structures in powder bed fusion of polymers
  12th CIRP Conference on Photonic Technologies, LANE 2022 (Erlangen, DEU, 4. September 2022 - 8. September 2022)
  In: M. Schmidt, F. Vollertsen, B.M. Colosimo (Hrsg.): Procedia CIRP 2022
  DOI: 10.1016/j.procir.2022.08.109
• Jaksch A., Spinola M., Cholewa S., Pflug L., Stingl M., Drummer D.:
  Thin-Walled Part Properties in PBF-LB/P — Experimental Understanding and Nonlocal Material Model
  SFF 2022 (Austin, Texas, 25. Juli 2022 - 27. Juli 2022)
  DOI: 10.26153/tsw/44659
• Jiang F., Drummer D.:
  Analysis of UV Curing Strategy on Reaction Heat Control and Part Accuracy for Additive Manufacturing
  In: Polymers 14 (2022), Art.Nr.: 759
  ISSN: 2073-4360
  DOI: 10.3390/polym14040759
• Jiang F., Wörz A., Romeis M., Drummer D.:
  Analysis of UV-Assisted direct ink writing rheological properties and curing degree
  In: Polymer Testing 105 (2022), Art.Nr.: 107428
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2021.107428
• Jiang F., Zhou M., Drummer D.:
  Effects of Fumed Silica on Thixotropic Behavior and Processing Window by UV-Assisted Direct Ink Writing
  In: Polymers 14 (2022)
  ISSN: 2073-4360
  DOI: 10.3390/polym14153107
• Meschut G., Merklein M., Brosius A., Drummer D., Fratini L., Füssel U., Gude M., Homberg W., Martins PAF., Bobbert M., Lechner M., Kupfer R., Gröger B., Han D., Kalich J., Kappe F., Kleffel T., Köhler D., Kuball CM., Popp J., Römisch D., Troschitz J., Wischer C., Wituschek S., Wolf M.:
  Review on mechanical joining by plastic deformation
  In: Journal of Advanced Joining Processes (2022)
  ISSN: 2666-3309
  DOI: 10.1016/j.jajp.2022.100113
• Ott C., Drummer D.:
  In-situ leakage behavior of polymer-metal hybrids under mechanical load
  In: International Polymer Processing (2022)
  ISSN: 0930-777X
  DOI: 10.1515/ipp-2022-4229
• Ott C., Drummer D.:
  Reducing component stress during encapsulation of electronics: a simulative examination of thermoplastic foam injection molding
  In: Journal of Polymer Engineering (2022)
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2022-0150
• Peng T., Li L., Zhou M., Jiang F.:
  Concentration of Microparticles Using Flexural Acoustic Wave in Sessile Droplets
  In: Sensors 22 (2022), Art.Nr.: 1269
  ISSN: 1424-8220
  DOI: 10.3390/s22031269
• Popp J., Drummer D.:
  Joining of continuous fiber reinforced thermoplastic/steel hybrid parts via undercutting pin structures and infrared heating
  In: Journal of Advanced Joining Processes 5 (2022), Art.Nr.: 100084
  ISSN: 2666-3309
  DOI: 10.1016/j.jajp.2021.100084
• Popp J., Drummer D.:
  Joining of steel/CFRT-hybrid parts via non-rotational symmetric cold formed pin structures
  Hybrid 2022 (Leoben, 20. Juli 2022 - 22. Juli 2022)
• Popp J., Römisch D., Merklein M., Drummer D.:
  Joining of CFRT/Steel Hybrid Parts via Direct Pressing of Cold Formed Non-Rotational Symmetric Pin Structures
  In: Applied Sciences 12 (2022)
  ISSN: 2076-3417
  DOI: 10.3390/app12104962
• Roth B., Drummer D.:
  Druckabhängige Orientierungsrelaxation im dynamisch temperierten Spritzprägen
  In: Zeitschrift Kunststofftechnik 1 (2022), S. 1-23
  ISSN: 1864-2217
  DOI: 10.3139/o999.01012022
• Roth B., Frank R., Kleffel T., Schneider K., Drummer D.:
  High-Precision Thin Wall Bipolar Plates for Fuel Cell Applications via Injection Compression Molding with Dynamic Mold Temperature Control
  In: Polymers 14 (2022), Art.Nr.: 2799
  ISSN: 2073-4360
  DOI: 10.3390/polym14142799
• Rösel U., Drummer D.:
  Possibilities in Recycling Magnetic Materials in Applications of Polymer-Bonded Magnets
  In: Magnetism 2 (2022), S. 251-270
  ISSN: 2673-8724
  DOI: 10.3390/magnetism2030019
• Rösel U., Drummer D.:
  Simulationsgestützte Auslegung eines Spritzgießwerkzeugs zur Herstellung von kunststoffgebundenen Dauermagneten auf Duroplast Basis
  In: Werkstoffe in der Fertigung (2022), S. 22-26
  ISSN: 0939-2629
• Rösel U., Drummer D.:
  Understanding the Effect of Material Parameters on the Processability of Injection-Molded Thermoset-Based Bonded Magnets
  In: Magnetism 2 (2022), S. 211-228
  ISSN: 2673-8724
  DOI: 10.3390/magnetism2030016
• Rösel U., Kneidl M., Drummer D., Franke J.:
  Possibilities of Integrated Fabrication of Insulation Systems in Electric Drives by Injection Molding of Thermosets
  In: Polymers 14 (2022), S. 5352
  ISSN: 2073-4360
  DOI: 10.3390/polym14245352
• Schlicht S., Greiner S., Drummer D.:
  Low Temperature Powder Bed Fusion of Polymers by Means of Fractal Quasi-Simultaneous Exposure Strategies
  In: Polymers 14 (2022), Art.Nr.: 1428
  ISSN: 2073-4360
  DOI: 10.3390/polym14071428
• Schlicht S., Jaksch A., Drummer D.:
  Inline Quality Control through Optical Deep Learning-Based Porosity Determination for Powder Bed Fusion of Polymers
  In: Polymers 14 (2022), Art.Nr.: 885
  ISSN: 2073-4360
  DOI: 10.3390/polym14050885
• Schneider K., Gothe B., Drexler M., Siltamaeki J., Weiger H., Seefried A., Drummer D.:
  The effect of dielectric and thermal properties of plastic mold materials on the high frequency welding of three-dimensional foam components
  In: Polymer Engineering and Science (2022)
  ISSN: 0032-3888
  DOI: 10.1002/pen.26112
• Schubert D., Herzog C., Drummer D.:
  In Situ Test Rig for the Measurement of the Operating Characteristics of Polymer Gears
  In: Zeitschrift Kunststofftechnik 1 (2022), S. 93-116
  ISSN: 1864-2217
  DOI: 10.3139/O999.02022022
• Tomiak F., Drummer D.:
  The Impact of beta-Radiation Crosslinking on Flammability Properties of PA6 Modified by Commercially Available Flame-Retardant Additives
  In: Polymers 14 (2022)
  ISSN: 2073-4360
  DOI: 10.3390/polym14153168
• Tomiak F., Schneider K., Schoeffel A., Rathberger K., Drummer D.:
  Expandable Graphite as a Multifunctional Flame-Retarding Additive for Highly Filled Thermal Conductive Polymer Formulations
  In: Polymers 14 (2022)
  ISSN: 2073-4360
  DOI: 10.3390/polym14081613
• Tomiak F., Schoeffel A., Rathberger K., Drummer D.:
  Expandable Graphite, Aluminum Diethylphospinate and Melamine Polyphosphate as Flame Retarding System in Glass Fiber-Reinforced PA6
  In: Polymers 14 (2022)
  ISSN: 2073-4360
  DOI: 10.3390/polym14061263
• Wittmann LM., Drummer D.:
  Mechanical properties of thermoformed multilayer parts containing non thermoformable materials
  In: Journal of Plastic Film & Sheeting (2022), S. 875608792210939
  ISSN: 8756-0879
  DOI: 10.1177/87560879221093977
• Wittmann LM., Drummer D.:
  Two Layer Sheets for Processing Post-Consumer Materials
  In: Polymers 14 (2022)
  ISSN: 2073-4360
  DOI: 10.3390/polym14081507
• Wittmann LM., Kaschta J., Drummer D.:
  Biaxial Elongation Behavior in Partially Molted State of Two-Layer Sheets Containing Postconsumer Material
  In: Polymers 14 (2022), S. 3172
  ISSN: 2073-4360
  DOI: 10.3390/polym14153172
• Wolf M., Beiß T., Drummer D.:
  Neuartiges Werkzeugkonzept zum Schweißen von komplexen Bauteilen aus Kunststoffen in Klein- und Kleinstserien
  In: Konstruktion (2022), S. 70-74
  ISSN: 0720-5953
• Wolf M., Beiß T., Drummer D.:
  Neuartiges Werkzeugkonzept zum Schweißen von komplexen Bauteilen aus Kunststoffen in Klein- und Kleinstserien
  In: Konstruktion 74 (2022), S. 70-74
  ISSN: 0720-5953
  DOI: 10.37544/0720-5953-2022-10-70
• Wolf M., Drummer D.:
  Filling Behavior in Joining Using Pin-like Structures
  In: Polymers 14 (2022), S. 3083
  ISSN: 2073-4360
  DOI: 10.3390/polym14153083
• Wolf M., Drummer D.:
  Separation of Multi-Material Polymer Combinations Produced by Joining Using Pin-like Structures
  In: Journal of Manufacturing and Materials Processing 6 (2022), Art.Nr.: 13
  ISSN: 2504-4494
  DOI: 10.3390/jmmp6010013
• Wolf M., Drummer D.:
  Weld peculiarities of infrared-welded joints between laser-sintered and injection-moulded components
  In: Joining Plastics - Fügen von Kunststoffen 16 (2022), S. 166-173
  ISSN: 1864-3450
• Yuan S., Jiang B., Jiang F., Drummer D., Zhou M.:
  Numerical and experimental investigation of mixing enhancement in the passive planar mixer with bent baffles
  In: International Journal of Heat and Mass Transfer 191 (2022)
  ISSN: 0017-9310
  DOI: 10.1016/j.ijheatmasstransfer.2022.122815
• Yuan S., Jiang B., Peng T., Zhou M., Drummer D.:
  Investigation of efficient mixing enhancement in planar micromixers with short mixing length
  In: Chemical Engineering and Processing 171 (2022), Art.Nr.: 108747
  ISSN: 0255-2701
  DOI: 10.1016/j.cep.2021.108747
• Yuan S., Zhou M., Peng T., Li Q., Jiang F.:
  An investigation of chaotic mixing behavior in a planar microfluidic mixer
  In: Physics of Fluids 34 (2022)
  ISSN: 1070-6631
  DOI: 10.1063/5.0082831
• Zirngibl C., Kügler P., Popp J., Bielak CR., Bobbert M., Drummer D., Meschut G., Wartzack S., Schleich B.:
  Provision of cross-domain knowledge in mechanical joining using ontologies
  In: Production Engineering (2022), S. 327 - 338
  ISSN: 0944-6524
  DOI: 10.1007/s11740-022-01117-y

2021

• Deringer T., Drummer D.:
  In situ curing and bonding of epoxy prepregs in epoxy thermoset injection molding
  In: International Journal of Advanced Manufacturing Technology (2021)
  ISSN: 0268-3768
  DOI: 10.1007/s00170-021-07838-1
• Drummer D., Grützmacher C., Kleffel T., Lanzl L., Rösel U., Roth B., Schneider K., Tomiak F., Wittmann LM.:
  Hochgefüllte Kunststoffe: Neue Potenziale durch den Einsatz von Füllstoffen zur gezielten Eigenschaftsmodifikation
  In: Jahresmagazin Ingenieurwissenschaften (2021), S. 38-45
  ISSN: 1618-8357
  Open Access: https://institut-wv.de/wp-content/uploads/sites/9/2021/10/096-650_WAK-Kunststoff_2021_s.pdf
• Greiner S., Jaksch A., Cholewa S., Drummer D.:
  Development of material-adapted processing strategies for laser sintering of polyamide 12
  In: Advanced Industrial and Engineering Polymer Research (2021)
  DOI: 10.1016/j.aiepr.2021.05.002
• Greiner S., Jaksch A., Drummer D.:
  Materialangepasste Prozessstrategien für das Lasersintern von Kunststoffen
  27. Technomer - Fachtagung über Verarbeitung und Anwendung von Polymeren (Technische Universität Chemnitz, 4. November 2021 - 5. November 2021)
• Greiner S., Schlicht S., Drummer D.:
  Temperaturfeldhomogenisierung durch fraktale Belichtungsstrategien im Lasersintern von Kunststoffen
  Rapid.Tech (, 22. Juni 2021 - 23. Juni 2021)
  In: Proceedings of the 17th Rapid.Tech Conference 2021
  DOI: 10.3139/9783446471733.015
• Huang Z., Wu W., Drummer D., Liu C., Wang Y., Wang Z.:
  Enhanced the thermal conductivity of polydimethylsiloxane via a three-dimensional hybrid boron nitride@silver nanowires thermal network filler
  In: Polymers 13 (2021), S. 1-10
  ISSN: 2073-4360
  DOI: 10.3390/polym13020248
• Huang Z., Wu W., Drummer D., Liu C., Wang Y., Wang Z.:
  Multi-contact hybrid thermal conductive filler Al2O3@AgNPs optimized three-dimensional thermal network for flexible thermal interface materials
  In: Journal of Applied Polymer Science (2021)
  ISSN: 0021-8995
  DOI: 10.1002/app.50889
• Jaksch A., Hesse N., Schmidt J., Drummer D.:
  Selektives Laserstrahlschmelzen von Polyamid 12 - Einfluss von Fließhilfsmitteln auf Verarbeitbarkeit und Bauteileigenschaften
  Rapid.Tech 2021 (, 22. Juni 2021 - 23. Juni 2021)
  In: Proceedings of the 17th Rapid.Tech Conference 2021
  DOI: 10.3139/9783446471733.002
• Lanzl L., Drummer D.:
  Process Behavior of Short Glass Fiber Filled Systems during Powder Bed Fusion and Its Effect on Part Dimensions
  In: Polymers 13 (2021), Art.Nr.: 3144
  ISSN: 2073-4360
  DOI: 10.3390/polym13183144
• Liu C., Wu W., Drummer D., Wang Y., Chen Q., Liu X., Schneider K.:
  Significantly enhanced thermal conductivity of polymer composites via establishing double-percolated expanded graphite/multi-layer graphene hybrid filler network
  In: European Polymer Journal 160 (2021)
  ISSN: 0014-3057
  DOI: 10.1016/j.eurpolymj.2021.110768
• Ott C., Drummer D.:
  Low-stress over-molding of media-tight electronics using thermoplastic foam injection molding
  In: Polymer Engineering and Science (2021)
  ISSN: 1548-2634
  DOI: 10.1002/pen.25672
• Peng T., Fan C., Zhou M., Jiang F., Drummer D., Jiang B.:
  Rapid Enrichment of Submicron Particles within a Spinning Droplet Driven by a Unidirectional Acoustic Transducer
  In: Analytical Chemistry (2021)
  ISSN: 0003-2700
  DOI: 10.1021/acs.analchem.1c02914
• Piott F., Krämer A., Lück A., Hoffmann L., Mitschang P., Drummer D.:
  Increasing the performance of continuous compression moulding by local pressure adaption
  In: Advanced Manufacturing: Polymer and Composites Science (2021)
  ISSN: 2055-0340
  DOI: 10.1080/20550340.2021.1888209
• Popp J., Kleffel T., Drummer D.:
  Influence of pin geometry on the joint strength of CFRT-metal hybrid parts with metallic pins
  In: Joining Plastics - Fügen von Kunststoffen (2021), S. 177-183
  ISSN: 1864-3450
• Popp J., Kleffel T., Römisch D., Papke T., Merklein M., Drummer D.:
  Fiber Orientation Mechanism of Continuous Fiber Reinforced Thermoplastics Hybrid Parts Joined with Metallic Pins
  In: Applied Composite Materials (2021)
  ISSN: 0929-189X
  DOI: 10.1007/s10443-021-09892-0
• Popp J., Wolf M., Mattner T., Drummer D.:
  Energy Direction in Ultrasonic Impregnation of Continuous Fiber-Reinforced Thermoplastics
  In: Journal of Composites Science 5 (2021), Art.Nr.: 239
  ISSN: 2504-477X
  DOI: 10.3390/jcs5090239
• Qiang J., Jiang B., Dong Y., Roth B., Jiang F.:
  Extension of the Stoney formula for the incremental stress of thin films
  In: Applied Physics Letters 118 (2021), Art.Nr.: 091604
  ISSN: 0003-6951
  DOI: 10.1063/5.0038257
• Romeis M., Drummer D.:
  A dyciandiamine-based methacrylate-epoxy dual-cure blend-system for stereolithography
  In: Polymers 13 (2021), Art.Nr.: 3139
  ISSN: 2073-4360
  DOI: 10.3390/polym13183139
• Roth B., Drummer D.:
  Isotropy of mechanical properties and environmental stress crack sensitivity in injection- and injection-compression molding of polystyrene with different mold temperature
  In: Polymer Engineering and Science (2021), S. 1-10
  ISSN: 0032-3888
  DOI: 10.1002/pen.25793
• Roth B., Drummer D.:
  Pressure Equilibrium Time of a Cyclic-Olefin Copolymer
  In: Polymers 13 (2021), Art.Nr.: 15
  ISSN: 2073-4360
  DOI: 10.3390/polym13142309
• Rothfelder R., Lanzl L., Selzam JH., Drummer D., Schmidt M.:
  Vibrational Microfeeding of Polymer and Metal Powders for Locally Graded Properties in Powder-Based Additive Manufacturing
  In: Journal of Materials Engineering and Performance (2021)
  ISSN: 1059-9495
  DOI: 10.1007/s11665-021-06271-5
• Römisch D., Popp J., Drummer D., Merklein M.:
  Joining of CFRT-steel hybrid parts via hole-forming and subsequent pin caulking
  In: Production Engineering (2021)
  ISSN: 0944-6524
  DOI: 10.1007/s11740-021-01093-9
• Rösel U., Drummer D.:
  Correlation between the Flow and Curing Behavior of Hard Magnetic Fillers in Thermosets and the Magnetic Properties
  In: Magnetism (2021), S. 37-57
  ISSN: 2673-8724
  DOI: 10.3390/magnetism1010004
• Rösel U., Drummer D.:
  Injection Moulding of Multipolar Polymer-Bonded Magnets into Soft Magnetic Inserts for Rotors in Reluctance Motors
  In: Magnetism (2021), S. 3-21
  ISSN: 2673-8724
  DOI: 10.3390/magnetism1010004
• Rösel U., Drummer D., Köjer M.:
  Fertigung eines Spritzgießwerkzeuges zur Herstellung von Flusssperren aus kunststoffgebundenen Dauermagneten in einem Synchron-Reluktanzmotor
  In: Werkstoffe in der Fertigung (2021)
  ISSN: 0939-2629
• Schneider K., Ott C., Drummer D.:
  Simulative study of polymeric core-shell foam particles for the enlargement of the material portfolio in 3-D high-frequency welding
  In: Polymer Engineering and Science (2021)
  ISSN: 0032-3888
  DOI: 10.1002/pen.25861
• Schulte-Hubbert F., Drummer D., Hoffmann L.:
  Model Approach for Displaying Dynamic Filament Displacement during Impregnation of Continuous Fibres Based on the Theory of Similarity - Theory and Modelling
  In: International Polymer Processing 36 (2021), S. 423-434
  ISSN: 0930-777X
  DOI: 10.1515/ipp-2020-4020
• Tomiak F., Rathberger K., Schoeffel A., Drummer D.:
  Expandable Graphite for Flame Retardant PA6 Applications
  In: Polymers 13 (2021), Art.Nr.: 2733
  ISSN: 2073-4360
  DOI: 10.3390/polym13162733
• Tomiak F., Schoeffel A., Rathberger K., Drummer D.:
  A synergistic flame retardant system based on expandable graphite, aluminum (Diethyl-)polyphospinate and melamine polyphosphate for polyamide 6
  In: Polymers 13 (2021), Art.Nr.: 2712
  ISSN: 2073-4360
  DOI: 10.3390/polym13162712
• Wittmann LM., Drummer D.:
  Multilayer sheets for thermoforming non thermoformable polymers
  In: Journal of Plastic Film & Sheeting (2021)
  ISSN: 8756-0879
  DOI: 10.1177/87560879211037387
• Wolf M., Drummer D.:
  Design criteria for the pin-foot ratio for joining adhesion-incompatible polymers using pin-like structures in vibration welding process
  In: Journal of Polymer Engineering (2021)
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2021-0199
• Wu W., Zeng K., Zhao B., Duan F., Jiang F.:
  New Considerations on the Determination of the Apparent Shear Viscosity of Polymer Melt with Micro Capillary Dies
  In: Polymers 13 (2021)
  ISSN: 2073-4360
  DOI: 10.3390/polym13244451

2020

• Deringer T., Drummer D.:
  The influence of mold temperature on thermoset in-mold forming
  In: Journal of Polymer Engineering (2020)
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2019-0322
• Fleck A., Wöllner T.:
  The Impact of Examples on Creativity: Gender Differences in Fixation Effects
  In: Brem A., Bican P., Wimschneider C. (Hrsg.): Gender Differences in Technology and Innovation Management - Insights from Experimental Research, München: De Gruyter Studies in Innovation and Entrepreneurship, 2020, S. 7-28
  ISBN: 978-3-11-059079-1
  DOI: 10.1515/9783110593952-002
• Greiner S., Drummer D.:
  Infrared monitoring of modified hatching strategies for laser sintering of polymers
  11th CIRP Conference on Photonic Technologies / LANE 2020 (, 6. September 2020 - 10. September 2020)
  In: Procedia CIRP 2020
  DOI: 10.1016/j.procir.2020.09.018
• Greiner S., Jaksch A., Drummer D.:
  Understanding Cylinder Temperature Effects in Laser Beam Melting of Polymers
  1st International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020 (, 19. Mai 2020 - 20. Mai 2020)
  In: Lecture Notes in Mechanical Engineering 2020
  DOI: 10.1007/978-3-030-70332-5_12
• Heinl M., Greiner S., Wudy K., Pobel C., Rasch M., Huber F., Papke T., Merklein M., Schmidt M., Körner C., Drummer D., Hausotte T.:
  Measuring procedures for surface evaluation of additively manufactured powder bed based polymer and metal parts
  In: Measurement Science and Technology 31 (2020), S. 1-14
  ISSN: 1361-6501
  DOI: 10.1088/1361-6501/ab89e2
• Hertle S., Kleffel T., Wörz A., Drummer D.:
  Production of polymer-metal hybrids using extrusion-based additive manufacturing and electrochemically treated aluminum
  In: Additive Manufacturing 33 (2020), Art.Nr.: 101135
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2020.101135
• Jiang F., Drummer D.:
  Curing Kinetic Analysis of Acrylate Photopolymer for Additive Manufacturing by Photo-DSC
  In: Polymers 12 (2020)
  ISSN: 2073-4360
  DOI: 10.3390/polym12051080
• Knorr VL., Setter R., Rietzel D., Wudy K., Osswald T.:
  Comparative Analysis of the Impact of Additively Manufactured Polymer Tools on the Fiber Configuration of Injection Molded Long-Fiber-Reinforced Thermoplastics
  In: Journal of Composites Science 4 (2020)
  ISSN: 2504-477X
  DOI: 10.3390/jcs4030136
• Kugler S., Cruz C., Kech A., Chang TC., Osswald T.:
  Workflow for enhanced fiber orientation prediction of short fiber-reinforced thermoplastics
  SPE ANTEC 2020: Annual Technical Conference for Plastic Professionals (, 30. März 2020 - 5. Mai 2020)
  In: Annual Technical Conference - ANTEC, Conference Proceedings 2020
• Kugler S., Lambert GM., Cruz C., Kech A., Osswald TA., Baird DG.:
  Efficient parameter identification for macroscopic fiber orientation models with experimental data and a mechanistic fiber simulation
  35th International Conference of the Polymer Processing Society, PPS 2019 (Cesme-Izmir, 26. Mai 2019 - 30. Mai 2019)
  In: Fevzi Cakmak Cebeci, Yusuf Z. Menceloglu, Serkan Unal, Yakup Ulcer (Hrsg.): AIP Conference Proceedings 2020
  DOI: 10.1063/1.5142965
• Kugler S., Lambert GM., Cruz C., Kech A., Osswald TA., Baird DG.:
  Macroscopic fiber orientation model evaluation for concentrated short fiber reinforced polymers in comparison to experimental data
  In: Polymer Composites (2020)
  ISSN: 0272-8397
  DOI: 10.1002/pc.25553
• Lanzl L., Wudy K., Drummer D.:
  The effect of short glass fibers on the process behavior of polyamide 12 during selective laser beam melting
  In: Polymer Testing (2020)
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2019.106313
• Liu C., Wu W., Drummer D., Shen W., Wang Y., Schneider K., Tomiak F.:
  ZnO nanowire-decorated Al2O3hybrids for improving the thermal conductivity of polymer composites
  In: Journal of Materials Chemistry C 8 (2020), S. 5380-5388
  ISSN: 2050-7526
  DOI: 10.1039/c9tc06805h
• Mattner T., Drummer D.:
  Analysis of Contributive Forces In Intra-Laminar Shear of Continuous Fiber Reinforced Thermoplastics
  ANTEC® 2020: The Virtual Edition Proceedings
  In: ANTEC® 2020: The Virtual Edition Proceedings 2020
• Mattner T., Popp J., Kleffel T., Gröschel C., Drummer D.:
  High Speed Forming of Continuous Fiber Reinforced Thermoplastics
  In: Applied Composite Materials (2020)
  ISSN: 0929-189X
  DOI: 10.1007/s10443-020-09794-7
• Mattner T., Wrensch M., Drummer D.:
  Shear behavior of woven and non-crimp fabric based thermoplastic composites at near-processing conditions
  In: Composites Part B-Engineering 185 (2020), Art.Nr.: 107761
  ISSN: 1359-8368
  DOI: 10.1016/j.compositesb.2020.107761
• Müller A., Schubert D., Drummer D., Hausotte T.:
  Determination of the single point uncertainty of customized polymer gear wheels using structured-light scanning with various polygonization settings
  In: Journal of Sensors and Sensor Systems 9 (2020), S. 51-60
  ISSN: 2194-8771
  DOI: 10.5194/jsss-9-51-2020
• Obst P., Riedelbauch J., Oehlmann P., Rietzel D., Launhardt M., Schmölzer S., Osswald TA., Witt G.:
  Investigation of the influence of exposure time on the dual-curing reaction of RPU 70 during the DLS process and the resulting mechanical part properties
  In: Additive Manufacturing 32 (2020), Art.Nr.: 101002
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2019.101002
• Ott C., Wolf M., Drummer D.:
  Media-Tight Polymer-Polymer Assemblies By Means of Sintered Powder Layer in Assembly Injection Moulding
  In: Procedia Manufacturing 47 (2020), S. 362-367
  ISSN: 2351-9789
  DOI: 10.1016/j.promfg.2020.04.286
• Qiang J., Luo K., Dong Y., Jiang B., Drummer D., Roth B.:
  In Situ Stress Measurement of Ni Electrodeposition Using Lateral Shearing Interferometry
  In: Journal of The Electrochemical Society 167 (2020)
  ISSN: 0013-4651
  DOI: 10.1149/1945-7111/abcb78
• Roth B., Drummer D.:
  Anwendungsoptimierte Druckverfestigung
  In: Zeitschrift Kunststofftechnik 2020 (2020), S. 108-132
  ISSN: 1864-2217
  DOI: 10.3139/O999.01042020
• Roth B., Drummer D.:
  Application optimized compression induced solidification
  In: International Journal of Plastics Technology 16 (2020)
  ISSN: 0972-656X
• Roth B., Wildner W., Drummer D.:
  Compression-Induced Solidification
  In: Polymers 12 (2020), Art.Nr.: 488
  ISSN: 2073-4360
  DOI: 10.3390/polym12020488
• Roth B., Wildner W., Drummer D.:
  Dynamic compression induced solidification
  In: Polymers 12 (2020), Art.Nr.: 488
  ISSN: 2073-4360
  DOI: 10.3390/polym12020488
• Rösel U., Drummer D.:
  Einfluss von Prozessparametern auf die Eigenschaften von Rotoren
  Fachtagung Leitfähige Kunststoffe des Kunststoffinstituts Lüdenscheid
• Schneider K., Wudy K., Drummer D.:
  Flame-retardant polyamide powder for laser sintering: Powder characterization, processing behavior and component properties
  In: Polymers 12 (2020), Art.Nr.: 1697
  ISSN: 2073-4360
  DOI: 10.3390/POLYM12081697
• Schubert D., Rohrmoser A., Hagenah H., Merklein M., Drummer D.:
  Verschleißmodellierung am Beispiel einer Polyamid-Stahl-Getriebepaarung für das prozessorientierte Toleranzmanagement
  Summer School Toleranzmanagement (Erlangen, 28. September 2020 - 28. September 2020)
  In: Sandro Wartzack (Hrsg.): Beiträge zur 4. Summer School 2020
• Soldner D., Greiner S., Burkhardt C., Drummer D., Steinmann P., Mergheim J.:
  Numerical and experimental investigation of the isothermal assumption in selective laser sintering of PA12
  In: Additive Manufacturing (2020)
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2020.101676
• Thielen N., Werner D., Schmidt K., Seidel R., Reinhardt A., Franke J.:
  A Machine Learning Based Approach to Detect False Calls in SMT Manufacturing
  43rd International Spring Seminar on Electronics Technology, ISSE 2020 (Demanovska Valley, 14. Mai 2020 - 15. Mai 2020)
  In: Proceedings of the International Spring Seminar on Electronics Technology 2020
  DOI: 10.1109/ISSE49702.2020.9121044
• Tomiak F., Schartel B., Wolf M., Drummer D.:
  Particle Size Related Effects of Multi-Component Flame-Retardant Systems in Poly(Butadiene Terephtalate)
  In: Polymers 12 (2020)
  ISSN: 2073-4360
  DOI: 10.3390/polym12061315
• Topic N., Kruppa S., Drummer D.:
  Assistance Machine Function for BMC Injection Molding
  International Symposium on Plastics Technology (Aachen)
  In: ADVANCES IN POLYMER PROCESSING 2020, BERLIN: 2020
  DOI: 10.1007/978-3-662-60809-8_15
• Völkl H., Steck P., Franz M., Wartzack S.:
  Kraftflussgerechte Fused Layer Modeling-Strukturen mit kurzfaserverstärktem Filament
  In: Konstruktion (2020), S. 76-82
  ISSN: 0720-5953
• Wang L., Wu W., Drummer D.:
  Construction of micro-thermal conductive network of self-assembled CNTs hybrids with 1D–0D structure
  In: Journal of Thermal Analysis and Calorimetry (2020)
  ISSN: 1388-6150
  DOI: 10.1007/s10973-020-10291-z
• Wang Y., Wu W., Drummer D., Liu C., Shen W., Tomiak F., Schneider K., Liu X., Chen Q.:
  Highly thermally conductive polybenzoxazine composites based on boron nitride flakes deposited with copper particles
  In: Materials & Design 191 (2020), Art.Nr.: 108698
  ISSN: 0264-1275
  DOI: 10.1016/j.matdes.2020.108698
• Wang Y., Wu W., Drummer D., Liu C., Tomiak F., Schneider K.:
  Improvement of thermal conductivity and mechanical properties for polybenzoxazine composites via incorporation of epoxy resin and segregated structure
  In: Materials Research Express 7 (2020)
  ISSN: 2053-1591
  DOI: 10.1088/2053-1591/abb263
• Wang Y., Wu W., Drummer D., Liu C., Tomiak F., Schneider K., Huang Z.:
  Achieving a 3D thermally conductive while electrically insulating network in polybenzoxazine with a novel hybrid filler composed of boron nitride and carbon nanotubes
  In: Polymers 12 (2020), S. 1-18
  ISSN: 2073-4360
  DOI: 10.3390/polym12102331
• Werner J., Vetter L., Hertle S., Wolf M., Drummer D.:
  Air inclusions in the polymer melt functioning as intrinsic physical blowing agents for the generation of foams in rotational molding
  In: Cellular Polymers (2020)
  ISSN: 0262-4893
  DOI: 10.1177/0262489320920070
• Wittmann LM., Kurth K., Drummer D.:
  Elongation behaviour of filled semi-crystalline polymers in thermoforming
  In: Advances in Materials and Processing Technologies 6 (2020), S. 647-660
  ISSN: 2374-068X
  DOI: 10.1080/2374068X.2020.1734348
• Wolf M., Drummer D.:
  Influence of the Structuring-Tool Geometry on Form-Fit Joining by Use of Pin-Like Structures in Vibration Welding
  In: Procedia Manufacturing 47 (2020), S. 375-382
  ISSN: 2351-9789
  DOI: 10.1016/j.promfg.2020.04.292
• Wolf M., Drummer D.:
  Joining laser-sintered with injection-molded parts made of PA12 using infrared welding
  In: Polymer Engineering and Science (2020)
  ISSN: 0032-3888
  DOI: 10.1002/pen.25596
• Wolf M., Werner J., Drummer D.:
  Weld seam morphology and bond strength of infrared and vibration welded SLS parts of polyamide 12 as a function of the layer build-up direction and the welding process
  In: Additive Manufacturing 36 (2020), Art.Nr.: 101451
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2020.101451
• Wudy K., Drummer D.:
  Curing behavior of thermosets for the use in a combined selective laser sintering process of polymers
  29th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2018 (Austin, TX, 13. August 2018 - 15. August 2018)
  In: Solid Freeform Fabrication 2018: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2018 2020
• Wölfel B., Seefried A., Allen V., Kaschta J., Holmes C., Schubert DW.:
  Recycling and Reprocessing of Thermoplastic Polyurethane Materials towards Nonwoven Processing
  In: Polymers (2020)
  ISSN: 2073-4360
  DOI: 10.3390/polym12091917
  URL: https://www.mdpi.com/2073-4360/12/9/1917
• Zhou M., Fu L., Jiang F., Jiang B., Drummer D.:
  Atomistic investigation on the wetting behavior and interfacial joining of polymer-metal interface
  In: Polymers 12 (2020), Art.Nr.: 1696
  ISSN: 2073-4360
  DOI: 10.3390/POLYM12081696
• Zou Z., Wu W., Wang Y., Drummer D.:
  Biomass derived carbon aerogel as an ultrastable skeleton of form-stable phase change materials for efficient thermal energy storage
  In: Materials Research Express 7 (2020)
  ISSN: 2053-1591
  DOI: 10.1088/2053-1591/ab8584
• Zou Z., Wu W., Wang Y., Kern W., Drummer D.:
  Influences of Morphology Controllable Alumina on the Thermal Conductivity of Composites of Silicone Rubber 形貌可控氧化铝对硅橡胶复合材料导热性能的影响
  In: Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering 36 (2020), S. 128-134 and 141
  ISSN: 1000-7555
  DOI: 10.16865/j.cnki.1000-7555.2020.0082

2019

• Dechet M., Goblirsch A., Romeis S., Zhao M., Lanyi F., Kaschta J., Schubert DW., Drummer D., Peukert W., Schmidt J.:
  Production of polyamide 11 microparticles for Additive Manufacturing by liquid-liquid phase separation and precipitation
  In: Chemical Engineering Science 197 (2019), S. 11-25
  ISSN: 0009-2509
  DOI: 10.1016/j.ces.2018.11.051
• Dechet M., Lanzl L., Werner Y., Drummer D., Bück A., Peukert W., Schmidt J.:
  Manufacturing and Application of PA11-Glass Fiber Composite Particles for Selective Laser Sintering
  30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
  In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
  URL: http://utw10945.utweb.utexas.edu/sites/default/files/2019/089 Manufacturing and Application of PA11-Glass Fiber.pdf
• Dechet M., Lanzl L., Wilden A., Sattes MM., Drummer D., Peukert W., Schmidt J.:
  Manufacturing of nanoparticle-filled PA11 composite particles for selective laser sintering
  30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
  In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
  Open Access: http://utw10945.utweb.utexas.edu/sites/default/files/2019/090 Manufacturing of Nanoparticle-Filled PA11 Composit.pdf
• Deringer T., Drummer D.:
  Reduction of overmolding of Thermoset In-Mould produced hybrid components
  SPE Antec (Detroit, 18. März 2019 - 20. März 2019)
  In: Proceedings of SPE ANTEC 2019 2019
• Deringer T., Kleffel T., Drummer D.:
  Integrative manufacturing of thermoset injection molding components with continous fiber-reinforcement
  In: Zeitschrift Kunststofftechnik 15 (2019), S. 169-187
  ISSN: 1864-2217
  DOI: 10.3139/O999.03022019
• Drummer D., Greiner S., Zhao M., Wudy K.:
  A novel approach for understanding laser sintering of polymers
  In: Additive Manufacturing 27 (2019), S. 379-388
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2019.03.012
• Fischer A., Zhong Y., Zhang L., Wu W., Drummer D.:
  Heat propagation in thermally conductive polymers of PA6 and hexagonal boron nitride
  In: Fire and Materials (2019)
  ISSN: 0308-0501
  DOI: 10.1002/fam.2753
• Gierl B., Drummer D.:
  Investigation of radiation crosslinking as performance enhancement for thermoplastic spur gears
  VDI Gears 2019 (München, 18. September 2019 - 18. September 2019)
  In: VDI-Berichte 2019 2019
• Gierl B., Hertle S., Kleffel T., Drummer D.:
  Micrometer accurate measurement of tooth wear
  In: Kunststoffe International 109 (2019), S. 107-109
  ISSN: 1862-4243
• Gierl B., Schubert D., Wörz A., Drummer D. (Hrsg.):
  Kunststoffe in tribologischen Systemen - Forschung an der FAU Erlangen-Nürnberg
  2019
  (WAK Jahresmagazin 2019)
• Greiner S., Lanzl L., Wudy K., Drummer D.:
  A new approach for getting more homegeneous temperature fields in selective laser sintering of polymers
  PPS (Polymer Processing Society) (Dresden, 26. Juni 2017 - 29. Juni 2017)
  In: AIP Conference Proceedings 2055 2019
  DOI: 10.1063/1.5084907
• Greiner S., Wudy K., Wörz A., Drummer D.:
  Thermographic investigation of laser-induced temperature fields in selective laser beam melting of polymers
  In: Optics and Laser Technology 109 (2019), S. 569-576
  ISSN: 0030-3992
  DOI: 10.1016/j.optlastec.2018.08.010
• Haug M., Meyer C., Reischl B., Prölß G., Vetter K., Iberl J., Nübler S., Schürmann S., Rupitsch S., Heckel M., Pöschel T., Winter L., Herrmann H., Clemen CS., Schröder R., Friedrich O.:
  The MyoRobot technology discloses a premature biomechanical decay of skeletal muscle fiber bundles derived from R349P desminopathy mice
  In: Scientific Reports 9 (2019), Art.Nr.: 10769
  ISSN: 2045-2322
  DOI: 10.1038/s41598-019-46723-6
• Hertle S., Wörz A., Drummer D.:
  Analyse der Temperaturführung in der roboterbasierten Materialextrusion mit Polypropylen
  16th Rapid.Tech (Erfurt, 25. Juni 2019 - 27. Juni 2019)
  In: Proceedings of the 16th Rapid.Tech Conference 2019
  DOI: 10.3139/9783446462441.018
• Jaksch A., Wudy K., Drummer D.:
  Interaktion der Ausgangspulverkennwerte und der Belichtungsparameter im selektiven Laserstrahlschmelzen von Kunststoffen auf resultierende Bauteileigenschaften
  16th Rapid.Tech (Erfurt, 25. Juni 2019 - 27. Juni 2019)
  DOI: 10.3139/9783446462441.020
• Jiang B., Zhu L., Min L., Li X., Zhai Z., Drummer D.:
  Characterization of microchannel replicability of injection molded electrophoresis microfluidic chips
  In: Polymers 11 (2019), Art.Nr.: 608
  ISSN: 2073-4360
  DOI: 10.3390/polym11040608
• Kleffel T., Frey P., Merklein M., Drummer D.:
  Analysis of the formation of gap-based leakages in polymer-metal electronic systems with labyrinth seals
  In: Journal of Polymer Engineering (2019)
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2019-0098
• Kraus M., Frey P., Kleffel T., Drummer D., Merklein M.:
  Mechanical joining without auxiliary element by cold formed pins for multi-material-systems
  22nd International ESAFORM Conference on Material Forming (ESAFORM 2019) (Vitoria-Gasteiz, 8. Mai 2019 - 8. Mai 2019)
  DOI: 10.1063/1.5112570
• Kurth K., Drummer D.:
  Improvement of the Reproduction Accuracy of a Defined Pole Length of Injection Molded Encoder Wheels
  Europe/Africa Regional Dresden Conference of the Polymer-Processing-Society (PPS) (Dresden, 27. Juni 2017 - 29. Juni 2017)
  In: PROCEEDINGS OF THE EUROPE/AFRICA CONFERENCE DRESDEN 2017 - POLYMER PROCESSING SOCIETY PPS, MELVILLE: 2019
  DOI: 10.1063/1.5084874
• Lanzl L., Drummer D.:
  Gefüllte Systeme für die Additive Fertigung: Erhöhung der Reproduzierbarkeit durch innovative Mischstrategien
  7. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg, 12. Dezember 2019 - 12. Dezember 2019)
  In: Vom Pulver zum multifunktionalen Bauteil 2019
• Lanzl L., Wudy K., Greiner S., Drummer D.:
  Selective laser sintering of copper filled polyamide 12: powder properties and process behavior
  In: Polymer Composites 40 (2019), S. 1801-1809
  ISSN: 0272-8397
  DOI: 10.1002/pc.24940
• Launhardt M., Drummer D.:
  Determination of the fundamental dimension development in building direction for laser-sintered parts
  In: Journal of Polymer Engineering 39 (2019)
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2018-0204
• Launhardt M., Ebel N., Kondruweit M., Weyand M., Volk T., Drummer D.:
  Developing a patient individualized flexible silicone implant using SLS and vacuum die casting
  In: AIP Conference Proceedings 2055 (2019), Art.Nr.: 140005
  ISSN: 0094-243X
  DOI: 10.1063/1.5084908
• Launhardt M., Ebel N., Kondruweit M., Weyane M., Volk T., Drummer D.:
  Developing a Patient Individualized Flexible Silicone Implant using SLS and Vacuum Die Casting
  Europe/Africa Regional Dresden Conference of the Polymer-Processing-Society (PPS) (Dresden, 27. Juni 2017 - 29. Juni 2017)
  In: PROCEEDINGS OF THE EUROPE/AFRICA CONFERENCE DRESDEN 2017 - POLYMER PROCESSING SOCIETY PPS, MELVILLE: 2019
  DOI: 10.1063/1.5084908
• Mattner T., Drummer D.:
  A new approach for assessing the deflection and bending properties of continuous fiber reinforced thermoplastics under processing conditions
  In: Polymer Testing 74 (2019), S. 77-85
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2018.12.024
• Müller A., Metzner S., Hausotte T., Schubert D., Drummer D.:
  Separation of locally determined work piece deviations and measurement uncertainties for structured-light scanning of customized polymer gear wheels
  20. GMA/ITG-Fachtagung Sensoren und Messsysteme 2019 (Nürnberg, 25. Juni 2019 - 26. Juni 2019)
  In: AMA Service GmbH (Hrsg.): 20. GMA/ITG-Fachtagung Sensoren und Messsysteme 2019 2019
  DOI: 10.5162/sensoren2019/6.4.1
  URL: https://www.ama-science.org/proceedings/details/3467
• Ott C., Wolf M., Kleffel T., Drummer D.:
  Haftungsinkompatible Kunststoff-Kunststoff-Verbunde mit gesteigerter Mediendichtheit mittels aufgesinterter Mikrostrukturen
  In: Zeitschrift Kunststofftechnik 15 (2019), S. 314-334
  ISSN: 1864-2217
  DOI: 10.3139/o999.03042019
• Riedle H., Braunias K., Mukai B., Franke J.:
  Experimental Mechanical Examination of Artificial 3D Printed and Post Processed Vascular Silicone Models *
  In: 2019 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) 2019
  DOI: 10.1109/EMBC.2019.8856888
• Rohrmoser A., Kiener C., Schubert D., Hagenah H., Drummer D., Merklein M.:
  Targeted influencing of the mission-relevant component properties of cold-forged gearwheels
  In: Konstruktion 2019 (2019), S. 94-98
  ISSN: 0720-5953
• Rohrmoser A., Kiener C., Schubert DW., Hagenah H., Drummer D., Merklein M.:
  Gezielte Beeinflussung der einsatzrelevanten Bauteileigenschaften kaltfließgepresster Zahnräder
  In: Konstruktion (2019), S. 94-98
  ISSN: 0720-5953
• Roth B., Wildner W., Drummer D.:
  Analysis of the processing-pressure dependent refractive index of polycarbonate by transmission measurements of glass-filled specimen
  In: Polymer Engineering and Science (2019)
  ISSN: 0032-3888
  DOI: 10.1002/pen
• Roth B., Zhou M., Drummer D.:
  Influence of the Mold Temperature and Part Thickness on the Replication Quality and Molecular Orientation in Compression Injection Molding of Polystyrene
  In: International Polymer Processing 34 (2019), S. 425-433
  ISSN: 0930-777X
  DOI: 10.3139/217.3802
• Schubert D., Hertle S., Drummer D.:
  Einfluss prozessbedingter Gefügestrukturen auf die Zahnfußtragfähigkeit von POM-Stirnrädern
  In: Konstruktion 03/19 (2019), S. 75-81
  ISSN: 0720-5953
• Schubert D., Hertle S., Drummer D.:
  Einfluss prozessbedingter Gefügestrukturen auf die Zahnfußtragfähigkeit von POM-Stirnrädern
  In: Konstruktion 2019 (2019), S. 75-81
  ISSN: 0720-5953
  DOI: 10.37544/0720-5953-2019-03-75
• Schubert D., Hertle S., Drummer D.:
  Influence of titanium oxide-based colourants on the morphological and tribomechanical properties of injection-moulded polyoxymethylene spur gears
  In: Journal of Polymer Engineering (2019)
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2019-0170
• Schubert D., Hertle S., Kleffel T., Drummer D.:
  Development Of An Integrated Simulation Method For The Prediction Of Transmission Errors Of Injection Molded Spur Gears
  22nd International Conference on Material Forming (ESAFORM 2019) (Vittoria-Gasteiz, 8. Mai 2019 - 8. Mai 2019)
  DOI: 10.1063/1.5112663
• Schubert D., Hertle S., Kleffel T., Drummer D.:
  Development of a simulation method for the prediction of transmission errors of injection molded spur gears
  22nd International ESAFORM Conference on Material Forming, ESAFORM 2019 (Vitoria-Gasteiz, 8. Mai 2019 - 10. Mai 2019)
  In: Pedro Arrazola, Eneko Saenz de Argandona, Nagore Otegi, Joseba Mendiguren, Mikel Saez de Buruaga, Aitor Madariaga, Lander Galdos (Hrsg.): AIP Conference Proceedings 2019
  DOI: 10.1063/1.5112663
• Schubert D., Rohrmoser A., Hagenah H., Merklein M., Drummer D.:
  Einfluss der fertigungsbedingten Gestalt und Struktur auf das Einlaufverhalten von Stahl-Kunststoff-Getriebepaarungen
  Industriekolloquium der Forschergruppe FOR 2271 (Erlangen)
  In: Industriekolloquium der Forschergruppe FOR 2271 2019
• Schubert D., Rohrmoser A., Hertle S., Wartzack S., Hagenah H., Merklein M., Drummer D.:
  New Approach on the Allocation of Wear Allowances - a Case Study
  22nd International Conference on Engineering Design (ICED19) (Delft, 5. August 2019 - 8. August 2019)
  DOI: 10.1017/dsi.2019.358
• Schubert D., Rohrmoser A., Merklein M., Drummer D.:
  Effect of Surface Structure on Run-in Wear in Steel-Polyamide Gear Sets
  In: Zeitschrift Kunststofftechnik 15 (2019), S. 370-391
  ISSN: 1864-2217
  DOI: 10.3139/O999.03052019
• Ullmer A., Kleffel T., Zhai Z., Mattner T., Drummer D.:
  A Practical Approach for Validation of Aptitude of Sized Carbon Fibers for the In-Mould -Impregnation Process
  In: American Journal of Mechanical and Materials Engineering 3 (2019), S. 11-19
  ISSN: 2639-9628
  DOI: 10.11648/j.ajmme.20190301.12
• Vetter L., Werner J., Wolf M., Hertle S., Drummer D.:
  Influence of Vacuum on the Porosity and Mechanical Properties in Rotational Molding
  In: Polymer Engineering and Science (2019)
  ISSN: 0032-3888
  DOI: 10.1002/pen.25152
• Wang L., Wu W., Drummer D., Ma R., Liu Z., Shen W.:
  Study on thermal conductive PA6 composites with 3-dimensional structured boron nitride hybrids
  In: Journal of Applied Polymer Science 136 (2019)
  ISSN: 0021-8995
  DOI: 10.1002/app.47630
• Wang L., Wu W., Zou Z., Liu J., Fischer A., Drummer D.:
  Effects of CNTs/BN Hybrids on the Thermal Conductivity of PA6 Composite and Its Mechanism 碳纳米管/氮化硼混杂填料对尼龙6导热性能的影响及其机理
  In: Gaofenzi Cailiao Kexue Yu Gongcheng/Polymeric Materials Science and Engineering 35 (2019), S. 42-47
  ISSN: 1000-7555
  DOI: 10.16865/j.cnki.1000-7555.2019.0069
• Wittmann LM., Fischer D., Drummer D.:
  Radiation Crosslinking of Films - New Applications in the Thermoforming of Filled Materials
  In: Kunststoffe International 10/2019 (2019), S. 112-116
  ISSN: 1862-4243
• Wittmann LM., Fischer D., Drummer D.:
  Strahlenvernetzung von Folien - Neue Anwendungen bei der Verarbeitung gefüllter Materialien im Thermoformprozess
  In: Kunststoffe 10/2019 (2019), S. 176-179
  ISSN: 0023-5563
• Wittmann LM., Wolf M., Drummer D.:
  Influence of an Increased Fiber Filler Content on the Elongational Behaviour of Filled Films in the Thermoforming Process
  In: American Journal of Mechanical and Materials Engineering 3 (2019), S. 25-35
  ISSN: 2639-9628
  DOI: 10.11648/j.ajmme.20190302.11
• Wittmann LM., Wolf M., Kurth K., Drummer D.:
  Influence of radiation-crosslinking on the elongation behaviour of glass-fibre-filled sheets in the thermoforming process
  In: Journal of Polymer Engineering (2019)
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2019-0050
• Wolf M., Hertle S., Drummer D.:
  Influence of the thermomechanical properties on the joining of adhesion incompatible polymers by form-fit using the vibration welding process
  In: eXPRESS Polymer Letters 13 (2019), S. 365-378
  ISSN: 1788-618X
  DOI: 10.3144/expresspolymlett.2019.30
• Wudy K., Budde T.:
  Reaction kinetics and curing behavior of epoxies for use in a combined selective laser beam melting process of polymers
  In: Journal of Applied Polymer Science 136 (2019), Art.Nr.: 46850
  ISSN: 0021-8995
  DOI: 10.1002/app.46850
• Wudy K., Drummer D.:
  Aging effects of polyamide 12 in selective laser sintering: Molecular weight distribution and thermal properties
  In: Additive Manufacturing 25 (2019)
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2018.11.007
• Wudy K., Schmidt J., Lanzl L., Zhao M., Jaksch A., Dechet M., Hesse N., Drummer D., Peukert W.:
  Kunststoffpulver für die Additive Fertigung: Vorhersage des Prozessverhaltens mittels prozessangepasster Analyse / Plastic powder for Additive Manufacturing: Prediction of process behavior based on process adapted characterization
  7. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg, 12. Dezember 2019 - 12. Dezember 2019)
  In: Dietmar Drummer (Hrsg.): Vom Pulver zum multifunktionalen Bauteil 2019
• Wörz A., Drummer D.:
  Untersuchung zur Bedeutung der Schichtanzahl für Struktur und Eigenschaften von LS-Kunststoffbauteilen
  Technomer 2019 (Chemnitz, 7. November 2019 - 8. November 2019)
• Wörz A., Hertle S., Drummer D.:
  Mechanisches Verhalten lasergesinterter PA12 Bauteile bei variierenden statischen Belastungsgeschwindigkeiten und -dauern
  16th Rapid.Tech (Erfurt, 25. Juni 2019 - 27. Juni 2019)
  In: Proceedings of the 16th Rapid.Tech Conference 2019
  DOI: 10.3139/9783446462441.013
• Wörz A., Wiedau L., Wudy K., Wegner A., Witt G., Drummer D.:
  Influence of chemical postprocessing on mechanical properties of laser-sintered polyamide 12 parts
  In: Journal of Polymer Engineering (2019)
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2019-0110
• Wörz A., Wudy K., Drummer D.:
  Understanding the influence of energy-density on the layer-dependent part properties in laser-sintering of PA12
  30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, Texas)
  In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
• Wörz A., Wudy K., Drummer D., Heidebrecht M., Klein S.:
  Processing LDS-Circuit Boards by Selective Laser Sintering
  In: International Polymer Processing 34 (2019), S. 248-254
  ISSN: 0930-777X
  DOI: 10.3139/217.3670
• Yi W., Wu W., Drummer D., Shen W., Chao L., Ning W.:
  Synergistic construction of thermally conductive network in polybenzoxazine with boron nitride hybrid fillers
  In: Materials Research Express 6 (2019)
  ISSN: 2053-1591
  DOI: 10.1088/2053-1591/ab6e7d
• Zhang M., Jiang B., Chen C., Drummer D., Zhai Z.:
  The effect of temperature and strain rate on the interfacial behavior of glass fiber reinforced polypropylene composites: A molecular dynamics study
  In: Polymers 11 (2019), Art.Nr.: 1766
  ISSN: 2073-4360
  DOI: 10.3390/polym11111766
• Zhao Y., Drummer D.:
  Influence of filler content and filler size on the curing kinetics of an epoxy resin
  In: Polymers 11 (2019), Art.Nr.: 1797
  ISSN: 2073-4360
  DOI: 10.3390/polym11111797
• Zhao Y., Mattner T., Drummer D.:
  Investigation of the effects of pre-cross-linked thermoset molding compounds on weld line strength in injection molding
  In: International Journal of Advanced Manufacturing Technology (2019)
  ISSN: 0268-3768
  DOI: 10.1007/s00170-019-04306-9
• Zhou M., Xiong X., Drummer D., Jiang B.:
  Interfacial interaction and joining property of direct injection-molded polymer-metal hybrid structures: A molecular dynamics simulation study
  In: Applied Surface Science 478 (2019), S. 680-689
  ISSN: 0169-4332
  DOI: 10.1016/j.apsusc.2019.01.286
• Zhou M., Xiong X., Drummer D., Jiang B.:
  Molecular Dynamics Simulation on the Effect of Bonding Pressure on Thermal Bonding of Polymer Microfluidic Chip
  In: Polymers 11 (2019)
  ISSN: 2073-4360
  DOI: 10.3390/polym11030557
• Zhu L., Min L., Li X., Zhai Z., Drummer D., Jiang B.:
  Effects of process conditions on the heat transfer coefficient at the polymer-mold interface and tensile strength of thin-wall injection molding parts
  In: Journal of Polymer Engineering (2019)
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2018-0369

2018

• Dechet M., Gomez Bonilla JS., Lanzl L., Drummer D., Bück A., Schmidt J., Peukert W.:
  Spherical Polybutylene Terephtalate (PBT)-Polycarbonate (PC) Blend Particles by Mechanical Alloying and Thermal Rounding
  In: Polymers 10 (2018), Art.Nr.: 1373
  ISSN: 2073-4360
  DOI: 10.3390/polym10121373
• Dechet M., Zhao M., Drummer D., Peukert W., Schmidt J.:
  Herstellung und Charakterisierung von Pulvern für das selektive Laserstrahlschmelzen von Kunststoffen aus Flüssigphasenprozessen am Beispiel von PA11
  6. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung (Nürnberg, 12. Dezember 2019 - 12. Dezember 2019)
  In: Dietmar Drummer (Hrsg.): 6. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung, Erlangen: 2018
• Drexler M., Greiner S., Lexow M., Lanzl L., Wudy K., Drummer D.:
  Selective laser melting of polymers: Influence of powder coating on mechanical part properties
  In: Journal of Polymer Engineering 38 (2018), S. 667-674
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2017-0133
• Drummer D., Wudy K.:
  Additive Fertigung mit Kunststoffen: Potenziale, Entwicklungen und Trends
  In: Spritzgießen 2018, VDI Verlag GMBH, 2018, S. 53-64 (VDI Berichte)
• Fischer A., Kuhn T., Drummer D., Franke J.:
  Effect of talc on the metal adhesion of laser-structured polymer parts
  13th International Congress Molded Interconnect Devices (Würzburg, 26. September 2018 - 26. September 2018)
  DOI: 10.1109/icmid.2018.8666940
• Fischer C., Jungmeier A., Peters G., Drummer D.:
  Influence of a locally variable mold temperature on injection molded thin-wall components
  In: Journal of Polymer Engineering 38 (2018), S. 475-481
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2017-0100
• Greiner S., Lanzl L., Zhao M., Wudy K., Drummer D.:
  Influence of powder bed surface on part properties produced by selective laser beam melting of polymers
  7th International Conference on Additive Technologies - iCAT 2018 (Maribor, 10. Oktober 2018 - 11. Oktober 2018)
  In: Proceedings of the 7th International Conference on Additive Technologies - iCAT2018 2018
• Greiner S., Soldner D., Jaksch A., Zhao M., Mergheim J., Steinmann P., Wudy K., Drummer D.:
  Experimentelle und simulative Untersuchung der zeit- und ortsaufgelösten Temperaturfelder beim selektiven Strahlschmelzen von Kunststoffen
  6. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg, 13. Dezember 2018 - 13. Dezember 2018)
• Heinle M., Frey P., Merklein M., Drummer D.:
  Einfluss mikrogeformter Kanten an Metalleinlegern auf die Temperaturwechselbeständigkeit mediendichter Kunststoff-Metall-Hybriden
  In: Zeitschrift Kunststofftechnik 14 (2018), S. 211-232
  ISSN: 1864-2217
  DOI: 10.3139/o999.03032018
• Hertle S., Lass A., Wurm FH., Drummer D.:
  Integrative simulation method for the prediction of anisotropic and time-dependent mechanical behavior of injection molded fiber-reinforced fan impellers - creep modelling
  fan 2018 (Darmstadt, 18. April 2018 - 20. April 2018)
• Hertle S., Mattner T., Drummer D.:
  Berücksichtigung des Druckniveaus bei der Viskositätsermittlung im Hochdruckkapillarrheometer
  9. CONNECT! European Moldflow User Meeting 2018 (Frankfurt, 5. Juni 2018 - 6. Juni 2018)
• Jaksch A., Hesse N., Drummer D., Schmidt J.:
  Selektives Laserstrahlschmelzen von Kunststoffen: Lokale Bauteileigenschaften in Abhängigkeit unterschiedlicher Alterungszustände des Ausgangspulvers
  6. Industriekolloquium des SFB 814 (Nürnberg, 13. Dezember 2018 - 13. Dezember 2018)
  In: 6. Industriekolloquium des SFB 814, 2018
• Jiang L., Jiang B., Wu W., Zhu L., Drummer D.:
  Research on thermal contact resistance between polymer and mold during thin-wall injection molding 薄壁注射成型中聚合物与模具间接触热阻研究
  In: Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology) 49 (2018), S. 1381-1386
  ISSN: 1672-7207
  DOI: 10.11817/j.issn.1672-7207.2018.06.010
• Kleffel T., Drummer D.:
  Electrochemical treatment of metal inserts for subsequent assembly injection molding of tight electronic systems
  In: Journal of Polymer Engineering (2018)
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2017-0432
• Kleffel T., Drummer D.:
  One-step Electrochemical Treatment of Metal Inserts for Tight Polymer-Metal Hybrid Applications
  SPE Antec 2018 (Orlando)
• Lanzl L., Greiner S., Wudy K., Drummer D.:
  Glass-Filled Polypropylene-Systems for Enhancing Reproducibility during Selective Laser Beam Melting and Effect of the Mixing Strategy on Powder Properties
  7th International Conference on Additive Technologies - iCAT2018 (Maribor, 10. Oktober 2018 - 11. Oktober 2018)
  In: Proceedings of the 7th International Conference on Additive Technologies - iCAT2018 2018
• Lass A., Hertle S., Drummer D., Wurm FH.:
  Integrative simulation method for the prediction of anisotropic and time-dependent mechanical behavior of injection molded fiber-reinforced fan impellers - numerical and experimental approach
  fan 2018 (Darmstadt, 18. April 2018 - 20. April 2018)
• Lexow M., Heller B., Maier F., Steinrück HP.:
  Anion Exchange at the Liquid/Solid Interface of Ultrathin Ionic Liquid Films on Ag(111)
  In: ChemPhysChem 19 (2018), S. 2978-2984
  ISSN: 1439-4235
  DOI: 10.1002/cphc.201800773
• Mattner T., Drummer D.:
  Usability of dielectric properties for evaluation and research of deconsolidation of endless fiber-reinforced thermoplastics
  In: Journal of Polymer Engineering 38 (2018)
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2017-0395
• Mattner T., Körbel W., Wrensch M., Drummer D.:
  Compensation of edge effects in picture frame testing of continuous fiber reinforced thermoplastics
  In: Composites Part B-Engineering 142 (2018), S. 95-101
  ISSN: 1359-8368
  DOI: 10.1016/j.compositesb.2018.01.009
• Obst P., Launhardt M., Drummer D., Osswald P., Osswald T.:
  Failure criterion for PA12 SLS additive manufactured parts
  In: Additive Manufacturing 21 (2018), S. 619-627
  ISSN: 2214-7810
  DOI: 10.1016/j.addma.2018.04.008
• Osmanlic F., Wudy K., Laumer T., Schmidt M., Drummer D., Körner C.:
  Modeling of Laser Beam Absorption in a Polymer Powder Bed
  In: Polymers 10 (2018)
  ISSN: 2073-4360
  DOI: 10.3390/polym10070784
• Riedle H., Mukai B., Molz P., Franke J.:
  Determination of the Mechanical Properties of Aortic Tissue for 3D Printed Surgical Models
  2018 11th Biomedical Engineering International Conference (BMEiCON) (Chiang Mai, 21. November 2018 - 24. November 2018)
  In: BMEiCON - 2018, [Piscataway, New Jersey]: 2018
  DOI: 10.1109/BMEiCON.2018.8609983
• Topic N., Kruppa S., Drummer D., Schiffers R.:
  Stabilization of BMC injection molding by process control measures
  2018 Society of Plastics Engineers Annual Technical Conference, ANTEC 2018 (Orlando, FL, USA, 7. Mai 2018 - 10. Mai 2018)
  In: Annual Technical Conference - ANTEC, Conference Proceedings 2018
• Wang L., Zhang L., Fischer A., Zhong Y., Drummer D., Wu W.:
  Enhanced thermal conductivity and flame retardancy of polyamide 6/flame retardant composites with hexagonal boron nitride
  In: Journal of Polymer Engineering (2018)
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2017-0414
• Wildner W., Drummer D.:
  Analysis of the processing-pressure dependent refractive index of Poly(methyl methacrylate) by transmission measurements of glass-filled specimen
  In: Polymer Testing 71 (2018), S. 217-222
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2018.09.011
• Wildner W., Drummer D.:
  Light scattering and optical performance of glass-particle filled matrices with similar refractive index
  In: Journal of Composite Materials 52 (2018)
  ISSN: 0021-9983
  DOI: 10.1177/0021998318778889
• Wildner W., Drummer D.:
  Light scattering of glass-particle filled matrices with similar refractive index
  In: Journal of Composite Materials (2018)
  ISSN: 0021-9983
  DOI: 10.1177/0021998318778889
• Wildner W., Drummer D.:
  Nanofiller materials for transparent polymer composites: Influences on the properties and on the transparency—A review
  In: Journal of Thermoplastic Composite Materials (2018), S. 1-19
  ISSN: 0892-7057
  DOI: 10.1177/0892705718797157
• Wittmann LM., Kleffel T., Mattner T., Drummer D.:
  Influence of Stitching Parameters on the Joint Strength of Welded-Stitched Composites
  In: International Polymer Processing 33 (2018), S. 706-713
  ISSN: 0930-777X
  DOI: 10.3139/217.3518
• Wolf M., Launhardt M., Drummer D.:
  Untersuchung zum Vibrationsschweißen von laserstrahlgesinterten Bauteilen
  In: Joining Plastics - Fügen von Kunststoffen 01 (2018), S. 22-28
  ISSN: 1864-3450
• Wudy K., Drexler M., Lanzl L., Drummer D.:
  Analysis of time dependent thermal properties for high rates in selective laser sintering
  In: Rapid Prototyping Journal 24 (2018), S. 894-900
  ISSN: 1355-2546
  DOI: 10.1108/RPJ-01-2017-0013
• Wudy K., Drummer D.:
  Curing beharior of thermosets for the use in a combined selective laser sintering process
  9th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference (Austin, 13. August 2018 - 15. August 2018)
  In: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference 2018
• Wudy K., Drummer D.:
  Infiltration Behavior of Thermosets for Use in a Combined Selective Laser Sintering Process of Polymers
  In: JOM Journal of the Minerals, Metals and Materials Society (2018), S. 1-8
  ISSN: 1047-4838
  DOI: 10.1007/s11837-018-3226-0
• Wudy K., Greiner S., Zhao M., Drummer D.:
  Selective laser beam melting of polymers: In situ and offline measurements for process adapted thermal characterization
  In: Procedia CIRP 74 (2018), S. 238-243
  ISSN: 2212-8271
  DOI: 10.1016/j.procir.2018.08.102
• Wörz A., Drummer D.:
  Tribological anisotropy of selective laser sintered PA12 parts
  In: Polymer Testing 70 (2018), S. 117-126
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2018.06.028
• Wörz A., Drummer D.:
  Understanding hatch-dependent part properties in SLS
  International Solid Freeform Fabrication Symposium (Austin, 13. August 2018 - 15. August 2018)
  In: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium 2018
• Wörz A., Wudy K., Drummer D.:
  Einfluss des Schichtaufbaus auf das mechanische Verhalten von selektiv lasergesinterten Bauteilen
  Rapid Tech 2018 (Erfurt, 5. Juni 2018 - 7. Juni 2018)
  DOI: 10.3139/9783446458123.016
• Zhai Z., Jiang B., Drummer D.:
  Nonlinear material model for quasi-unidirectional woven composite accounting for viscoelastic, viscous deformation, and stiffness reduction
  In: Polymers 10 (2018), Art.Nr.: 903
  ISSN: 2073-4360
  DOI: 10.3390/polym10080903
• Zhai Z., Jiang By., Drummer D.:
  Strain rate-dependent mechanical behavior of quasi-unidirectional E-glass fabric reinforced polypropylene composites under off-axis tensile loading
  In: Polymer Testing 69 (2018), S. 276-285
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2018.05.033
• Zhai Z., Jiang By., Drummer D.:
  Temperature-dependent response of quasi-unidirectional E-glass fabric reinforced polypropylene composites under off-axis tensile loading
  In: Composites Part B-Engineering 148 (2018), S. 180-187
  ISSN: 1359-8368
  DOI: 10.1016/j.compositesb.2018.04.058
• Zhai Z., Jiang By., Drummer D.:
  Tensile Creep Behavior of Quasi-Unidirectional E-Glass Fabric Reinforced Polypropylene Composite
  In: Polymers 10 (2018)
  ISSN: 2073-4360
  DOI: 10.3390/polym10060661
• Zhang L., Wang L., Fischer A., Wu W., Drummer D.:
  Effect of graphite on the flame retardancy and thermal conductivity of P-N flame retarding PA6
  In: Journal of Applied Polymer Science (2018)
  ISSN: 0021-8995
  DOI: 10.1002/APP.46559
• Zhao M., Greiner S., Wudy K., Schmidt J., Peukert W., Drummer D.:
  Pulverschüttungsanalyse für das selektive Laser-Sintern mittels Computertomographie
  Rapid Tech (Erfurt, 5. Juni 2018 - 7. Juni 2018)
  In: Proceedings of the 15th Rapid.Tech Conference 2018
  DOI: 10.3139/9783446458123.019
• Zhao M., Wudy K., Drummer D.:
  Crystallization Kinetics of Polyamide 12 during Selective Laser Sintering
  In: Polymers 10 (2018)
  ISSN: 2073-4360
  DOI: 10.3390/polym10020168
• Zhao Y., Zhai Z., Drummer D.:
  Thermal conductivity of aluminosilicate- and aluminum oxide-filled thermosets for injection molding: Effect of filler content, filler size and filler geometry
  In: Polymers 10 (2018), Art.Nr.: 457
  ISSN: 2073-4360
  DOI: 10.3390/polym10040457
• Zhou M., Xiong X., Drummer D., Jiang B.:
  Molecular dynamics simulation and experimental investigation of the geometrical morphology development of injection-molded nanopillars on polymethylmethacrylate surface
  In: Computational Materials Science 149 (2018), S. 208-216
  ISSN: 0927-0256
  DOI: 10.1016/j.commatsci.2018.03.035

2017

• Braun T., Greiner S., Baierl U., Drummer D., Franke J.:
  Additive Metallisierung von im Spritzguss hergestellten Keramiken mittels Plasma-Coating-Technologie
  In: PLUS - Produktion von Leiterplatten und Systemen 19 (2017), S. 985-1144
• Braun T., Greiner S., Diepgen A., Schröppel K., Drummer D., Franke J.:
  ADDITIVE METALLIZATION OF INJECTION MOLDED CERAMIC COMPONENTS BY A PLASMA-COATING PROCESS
  SMTA Pan Pacific Microelectronics Symposium (Kauai, Hawaii, 6. Februar 2017 - 9. Februar 2017)
  In: IEEE (Hrsg.): Proceedings of the SMTA Pan Pacific Microelectronics Symposium, 2017 2017
• Deringer T., Gröschel C., Drummer D.:
  Influence of mold temperature and process time on the degree of cure of epoxy-based materials for thermoset injection molding and prepreg compression molding
  In: Journal of Polymer Engineering (2017)
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2016-0409
• Diermeier S., Iberl J., Vetter K., Haug M., Pollmann C., Reischl B., Buttgereit A., Schürmann S., Spörrer M., Goldmann W., Fabry B., Elhamine F., Stehle R., Pfitzer G., Winter L., Clemen CS., Herrmann H., Schröder R., Friedrich O.:
  Early signs of architectural and biomechanical failure in isolated myofibers and immortalized myoblasts from desmin-mutant knock-in mice
  In: Scientific Reports 7 (2017), S. 1391
  ISSN: 2045-2322
  DOI: 10.1038/s41598-017-01485-x
• Drummer D., Fischer A., Ranft F., Heinle C., Amesöder S., Lober A.:
  Thermally Conductive Polymers Meet LED
  In: Kunststoffe International 2017 (2017), S. 21-24
  ISSN: 1862-4243
• Drummer D., Fischer A., Ranft F., Heinle C., Amesöder S., Lober A.:
  Wärmeleitender Kunststoff trifft LED
  In: Kunststoffe 1 (2017), S. 38-41
  ISSN: 0023-5563
• Fischer A., Kuhn T., Müller H., Drummer D., Franke J., Zimmermann A.:
  Effect of flow lines on the metallization of laser structured polymer parts
  SPE Antec 2017 (Anaheim, 8. Mai 2017 - 10. Mai 2017)
  In: SPE Proceedings Antec 2017
• Fischer A., Meister S., Drummer D.:
  Effect of fillers on the metallization of laser-structured polymer parts
  In: Journal of Polymer Engineering 37 (2017), S. 151-161
  ISSN: 0334-6447
• Fischer C., Drummer D.:
  Einfluss der Werkzeugtemperatur auf die lokale Ausbildung der Bauteileigenschaften beim dynamisch temperierten Mikrospritzguss
  8. Kolloquium Mikroproduktion (Bremen, 27. November 2017 - 28. November 2017)
  In: 8. Kolloquium Mikroproduktion 2017
• Fischer C., Drummer D.:
  Micro Components with Locally Different Properties Realized by Segmented Tempered Injection Molding
  SPE Antec (Anaheim, 8. Mai 2017 - 10. Mai 2017)
  In: SPE Proceedings Antec, Anaheim: 2017
• Fischer C., Seefried A., Drummer D.:
  Crystallization and Component Properties of Polyamide 12 at Processing-Relevant Cooling Conditions
  In: Polymer Engineering and Science 57 (2017), S. 450-457
  ISSN: 0032-3888
  DOI: 10.1002/pen.24441
• Fischer C., Seefried A., Merle B., Göken M., Drummer D.:
  Influencing Hardness and Wear During the Dynamic Tempered Microinjection Molding Process by Considering Isothermal Holding Time
  In: Polymer Engineering and Science 57 (2017), S. 121-128
  ISSN: 0032-3888
  DOI: 10.1002/pen.24394
• Goris S., Back T., Yanev A., Brands D., Drummer D., Osswald T.:
  A novel fiber length measurement technique for discontinuous fiber-reinforced composites: A comparative study with existing methods
  In: Polymer Composites (2017)
  ISSN: 1548-0569
  DOI: 10.1002/pc.24466
• Greiner S., Kurth K., Fix C., Braun T., Franke J., Drummer D.:
  Influence of Material and Processing Parameters on the Surface Roughness of Injection-Molded Ceramic Parts
  In: Journal of Ceramic Science and Technology 08 (2017), S. 227-286
  ISSN: 2190-9385
  DOI: 10.4416/JCST2017-00009
• Greiner S., Lanzl L., Wudy K., Drexler M., Drummer D.:
  Untersuchungen zum Potential der Pulververdichtung durch den Pulverauftrag beim selektiven Laserstrahlschmelzen von Kunststoffen
  Rapid Tech 2017 (Erfurt, 20. Juni 2017 - 22. Juni 2017)
  In: Proceedings of Rapid Tech 2017 2017
• Greiner S., Wudy K., Lanzl L., Drummer D.:
  Selective laser sintering of polymer blends: Bulk properties and process behavior
  In: Polymer Testing 64 (2017), S. 136-144
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2017.09.039
• Gröschel C., Drummer D.:
  Forming of thermoplastic matrix composites with gas pressure - the influence of blank holder and sheet temperature on the forming pressure and drawing ratio
  In: International Polymer Processing 32 (2017), S. 194-202
  ISSN: 0930-777X
  DOI: 10.3139/217.3298
• Hertle S., Drummer D.:
  Einfluss der druckabhängigen Viskosität auf die Spritzgusssimulation kurzfaserverstärkter Thermoplaste
  Technomer 2017 (Chemnitz, 10. November 2017 - 10. November 2017)
• Hinze M., Ranft F., Drummer D., Schwieger W.:
  Reduction of the heat capacity in low-temperature adsorption chillers using thermally conductive polymers as heat exchangers material
  In: Energy Conversion and Management 145 (2017), S. 378-385
  ISSN: 0196-8904
  DOI: 10.1016/j.enconman.2017.05.011
• Kleffel T., Drummer D.:
  Investigating the suitability of roughness parameters to assess the bond strength of polymer-metal hybrid structures with mechanical adhesion
  In: Composites Part B-Engineering 117 (2017), S. 20-25
  ISSN: 1359-8368
  DOI: 10.1016/j.compositesb.2017.02.042
• Kleffel T., Drummer D., Kuhmann K.:
  Adhesion promoter for unequal pairs
  In: Kunststoffe International 107 (2017), S. 80-83
  ISSN: 1862-4243
• Kleffel T., Drummer D., Kuhmann K.:
  Vermittler für ungleiche Paare
  In: Kunststoffe International (2017), S. 199-203
  ISSN: 1862-4243
• Kreis O., Drummer D.:
  Department Maschinenbau - Forschung. Lehre. Transfer / Department of Mechanical Engineering – Research. Education. Transfer
  (2017)
  URL: https://www.department.mb.tf.fau.de/files/2017/03/MB_Departmentbroschuere_2017.pdf
  (anderer)
• Kurth K., Drummer D.:
  Effect of the variation of the gating system on the magnetic properties of injection molded pole-oriented rings
  In: Journal of Polymer Engineering 37 (2017), S. 537-546
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2016-0306
• Kurth K., Drummer D.:
  Variation of the Pole Length in Pole-Oriented Bonded Rings
  In: Journal of Polymers 2017 (2017), S. 11
  ISSN: 2356-7570
  DOI: 10.1155/2017/8241859
• Lanzl L., Wudy K., Greiner S., Drummer D.:
  Selektives Laserstrahlschmelzen von glasfasergefüllten Polymersystemen
  5. Industriekolloquium des SFB 814 (Nürnberg, 12. Dezember 2017 - 12. Dezember 2017)
  In: 5. Industriekolloquium des SFB 814 2017
• Leisen C., Wolf M., Drummer D.:
  Influence of the Mold Temperature on the Material Properties and the Vibration Welding Process of Cross-Linked Polyamide 66
  In: Polymer Engineering and Science (2017)
  ISSN: 0032-3888
  DOI: 10.1002/pen
• Lexow M., Drexler M., Drummer D.:
  Fundamental investigation of part properties at accelerated beam speeds in the selective laser sintering process
  In: Rapid Prototyping Journal 23 (2017), S. 1099-1106
  ISSN: 1355-2546
  DOI: 10.1108/RPJ-04-2016-0060
• Löhner MJ., Drummer D.:
  Characterization of layer built-up and inter-layer boundaries in rotational molding of multi-material parts in dependency of the filling strategy
  In: Journal of Polymer Engineering 37 (2017), S. 411-420
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2016-0175
• Löhner MJ., Drummer D.:
  Influence of Particle Size in Multi-layer Rotational Molding with a Multiphase Interlayer to generate Mechanical Adhesion
  SPE Antec 2017 (Anaheim, 8. Mai 2017 - 10. Mai 2017)
  In: SPE Proceedings Antec 2017
• Löhner MJ., Drummer D.:
  Optimierung der Verbundhaftung von mehrlagigen, rotationsgeformten Bauteilen durch Einbringen einer mehrphasigen Zwischenschicht
  In: Zeitschrift Kunststofftechnik 13 (2017), S. 1-31
  ISSN: 1864-2217
  DOI: 10.3139/O999.01012017
• Löhner MJ., Drummer D.:
  Optimization of adhesion in multi-layer rotational molded parts by including a multi-phase interlayer
  In: Zeitschrift Kunststofftechnik 2017 (2017), S. 1-31
  ISSN: 1864-2217
  DOI: 10.3139/O999.01012017
• Meister S., Fischer C., Drummer D.:
  Effects of high cooling rates on solidification for nucleated and non-nucleated semi-crystalline thermoplastics
  In: Zeitschrift Kunststofftechnik 13 (2017), S. 212-232
  ISSN: 1864-2217
  DOI: 10.3139/O999.01042017
• Meister S., Hertle S., Drummer D.:
  Layer-dependent characterization of wear behaviour on variothermal injection moulded micro parts using pin on disc measurements
  In: Microsystem Technologies-Micro-And Nanosystems-Information Storage and Processing Systems 23 (2017), S. 2807-2814
  ISSN: 0946-7076
  DOI: 10.1007/s00542-016-3051-8
• Obst P., Launhardt M., Drummer D., Osswald P., Osswald T.:
  Failure Criterion for SLS Additive Manufactured Parts
  SPE Antec (Anaheim, 8. Mai 2017 - 10. Mai 2017)
  In: SPE Proceedings Antec 2017
• Sarabi B., Drummer D.:
  Understanding flame-retardant grades better
  In: Kunststoffe International 107 (2017), S. 84-87
  ISSN: 1862-4243
• Schiffers R., Topic N., Moser S., Drummer D.:
  A method for controlling the mold filling volume for BMC injection molding
  75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017 (Anaheim, CA, USA, 8. Mai 2017 - 10. Mai 2017)
  In: Annual Technical Conference - ANTEC, Conference Proceedings 2017
• Wildner W., Drummer D.:
  The mechanical and optical properties of injection-moulded PMMA, filled with glass particles of a matching refractive index
  In: Polymers and Polymer Composites 25 (2017), S. 453-462
  ISSN: 1478-2391
• Wolf M., Kleffel T., Leisen C., Drummer D.:
  Joining of Incompatible Polymer Combinations by Form Fit Using the Vibration Welding Process
  In: International Journal of Polymer Science 2017 (2017), S. 8
  ISSN: 1687-9422
  DOI: 10.1155/2017/6809469
• Wudy K., Hinze M., Ranft F., Drummer D., Schwieger W.:
  Selective laser sintering of zeolite filled polypropylene composites: Processing and properties of bulk adsorbents
  In: Journal of Materials Processing Technology 246 (2017), S. 136-143
  ISSN: 0924-0136
  DOI: 10.1016/j.jmatprotec.2017.03.011
• Wörz A., Wudy K., Drummer D., Wegner A., Witt G.:
  Comparison of long-term properties of laser sintered and injection molded polyamide 12 parts
  In: Journal of Polymer Engineering (2017)
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2017-0227
• Zhai Z., Gröschel C., Drummer D.:
  Investigating the in-plane mechanical behavior of single-ply quasi-unidirectional glass fiber/polypropylene composites
  In: Journal of Polymer Engineering 37 (2017), S. 401-409
  ISSN: 0334-6447
  DOI: 10.1515/polyeng-2016-0247
• Zhai Z., Jiang By., Drummer D.:
  Characterization of nonlinear response in quasi-unidirectional E-glass fabric reinforced polypropylene composites under off-axis tensile loading
  In: Polymer Testing 63 (2017), S. 521-529
  ISSN: 0142-9418
  DOI: 10.1016/j.polymertesting.2017.09.019
• Zhong Y., Zhang L., Fischer A., Wang L., Drummer D.:
  The effect of hBN on the flame retardancy and thermal stability of P-N flame retardant PA6
  In: Journal of Macromolecular Science Part A-Pure and Applied Chemistry (2017)
  ISSN: 1060-1325
  DOI: 10.1080/10601325.2017.1387484