Lanzl, Lydia
Lydia Lanzl, M.Sc.
![]() |
Lydia Lanzl, M.Sc.Tätigkeit: Wissenschaftliche Mitarbeiterin
|
Anschrift:
Am Weichselgarten 9 91058 Erlangen
|
|
Raum:
2.10
|
Arbeitsgebiet/Aufgaben
- Additive Fertigung – Pulverwerkstoffe
- SFB 814 Additive Fertigung – Teilprojektbearbeiterin
Publikationen
2020
The effect of short glass fibers on the process behavior of polyamide 12 during selective laser beam melting
In: Polymer Testing (2020)
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2019.106313
, , :
2019
Manufacturing and Application of PA11-Glass Fiber Composite Particles for Selective Laser Sintering
30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
, , , , , , :
Manufacturing of nanoparticle-filled PA11 composite particles for selective laser sintering
30th Annual International Solid Freeform Fabrication Symposium 2019 (Austin, TX)
In: Proceedings of the 30th Annual International Solid Freeform Fabrication Symposium 2019 2019
Open Access: http://utw10945.utweb.utexas.edu/sites/default/files/2019/090 Manufacturing of Nanoparticle-Filled PA11 Composit.pdf
, , , , , , :
A new approach for getting more homegeneous temperature fields in selective laser sintering of polymers
PPS (Polymer Processing Society) (Dresden, 26. Juni 2017 - 29. Juni 2017)
In: AIP Conference Proceedings 2055 2019
, , , :
Gefüllte Systeme für die Additive Fertigung: Erhöhung der Reproduzierbarkeit durch innovative Mischstrategien
7. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg, 12. Dezember 2019 - 12. Dezember 2019)
In: Vom Pulver zum multifunktionalen Bauteil 2019
, :
Selective laser sintering of copper filled polyamide 12: powder properties and process behavior
In: Polymer Composites 40 (2019), S. 1801-1809
ISSN: 0272-8397
DOI: 10.1002/pc.24940
, , , :
Kunststoffpulver für die Additive Fertigung: Vorhersage des Prozessverhaltens mittels prozessangepasster Analyse / Plastic powder for Additive Manufacturing: Prediction of process behavior based on process adapted characterization
7. Industriekolloquium des Sonderforschungsbereichs 814 (Nürnberg, 12. Dezember 2019 - 12. Dezember 2019)
In: Dietmar Drummer (Hrsg.): Vom Pulver zum multifunktionalen Bauteil 2019
, , , , , , , , :
2018
Spherical Polybutylene Terephtalate (PBT)-Polycarbonate (PC) Blend Particles by Mechanical Alloying and Thermal Rounding
In: Polymers 10 (2018), Art.Nr.: 1373
ISSN: 2073-4360
DOI: 10.3390/polym10121373
, , , , , , :
Selective laser melting of polymers: Influence of powder coating on mechanical part properties
In: Journal of Polymer Engineering 38 (2018), S. 667-674
ISSN: 0334-6447
DOI: 10.1515/polyeng-2017-0133
, , , , , :
Influence of powder bed surface on part properties produced by selective laser beam melting of polymers
7th International Conference on Additive Technologies - iCAT 2018 (Maribor, 10. Oktober 2018 - 11. Oktober 2018)
In: Proceedings of the 7th International Conference on Additive Technologies - iCAT2018 2018
, , , , :
Glass-Filled Polypropylene-Systems for Enhancing Reproducibility during Selective Laser Beam Melting and Effect of the Mixing Strategy on Powder Properties
7th International Conference on Additive Technologies - iCAT2018 (Maribor, 10. Oktober 2018 - 11. Oktober 2018)
In: Proceedings of the 7th International Conference on Additive Technologies - iCAT2018 2018
, , , :
2017
Untersuchungen zum Potential der Pulververdichtung durch den Pulverauftrag beim selektiven Laserstrahlschmelzen von Kunststoffen
Rapid Tech 2017 (Erfurt, 20. Juni 2017 - 22. Juni 2017)
In: Proceedings of Rapid Tech 2017 2017
, , , , :
Selective laser sintering of polymer blends: Bulk properties and process behavior
In: Polymer Testing 64 (2017), S. 136-144
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2017.09.039
, , , :
Selektives Laserstrahlschmelzen von glasfasergefüllten Polymersystemen
5. Industriekolloquium des SFB 814 (Nürnberg, 12. Dezember 2017 - 12. Dezember 2017)
In: 5. Industriekolloquium des SFB 814 2017
, , , :
2016
Selective laser sintering of a polypropylene polyamide 12 blend: Bulk and component properties
iCAT 2016 (Nürnberg, 29. November 2016 - 30. November 2016)
In: Proceedings of 6th International Conference on Additive Technologies 2016
, , , :
Laser-high-speed-DSC: Process-oriented thermal analysis of PA 12 in selective laser sintering
In: Physics Procedia 83 (2016), S. 981-990
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2016.08.103
, , , :
Production of polybutylene terephtalate glass composite powders and characterization for processing in selective laser sintering
26th Annual International
Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference (Austin, 8. August 2016 - 10. August 2016)
, , , , , , , :
Analysis of time dependent thermal properties for high rates in selective laser sintering
iCAT 2016 (Nürnberg, 29. November 2016 - 30. November 2016)
In: Proceedings of 6th International Conference on Additive Technologies 2016
, , , :
Selective Laser Sintering of Filled Polymer Systems: Bulk and Laser Beam Interaction
In: Physics Procedia 83 (2016), S. 991-1002
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2016.08.104.
, , :
Selective laser sintering of filled polymer systems: Bulk properties and laser beam material interaction
In: Physics Procedia 83 (2016), S. 991-1002
ISSN: 1875-3892
DOI: 10.1016/j.phpro.2016.08.104
, , :